Document 6wBE9Nn4JEbxpJMaNQobo1171

b) The limitations of Section 2IS.204(j) shall not apply, to the Waukegan; Illinois, facilities of the Outboard Marine Corporation. so'Tong as the emissions of . volatile organic.material related to the surface-coating of miscellaneous metal parts - and.products at those-facilities do not exceed Jytons per year. c) Notwithstanding the limitations of Section 21S.204(k)(2). the John Deere . Harvester-Hoi ine Works of Oeere and Company. Moline.. Illinois. shall hoi cause or permit . the emission of volatile organic material from its existing green and yellow Mocoating operations-to exceed a weekly average of 6.2' ib/gal. (Source: Amended 12 111.-Reg.'20133. effective November 21,1988) Section 215.207.- : Compliance'byAggregation of Emission Sources a) Owners or operators of coating lines subject ...to Section 215:204-may cpmplywith this .' - - Section rather.than with Section 215.204. The methods or procedures used; to determine emissions of volatile organic material under this Section shall be' approved by the Agency in accordance with 35 111. Adm. Code 201. Emissions'of volatile organic-material from sources subject .to Section 2I5;204 are allowable, notwithstanding the limitations in Section 215.204. if the combined' actual emissions from selected coating -lines at the coating plant, but not including'coating lines or other emission sources constructed or modified after. July 1. 1979. Is less than or equal to the combined allowable emissions as determined by- the following equations: .m 5Eau - ' j=1 n- 3<Si i= ' e*C. * m ^ n 2(C.8;.(l0.)), J = 1, 1=1 :. b) Ai. shall-be, determined .by the-following .formula: A, =. ' R, . 1 - N. . S.".' _- - ' c) 4s used in subsection (a) and (b). symbols mean.the'following: eallallowable volatile organic material emissions from the coating plant in kg/day (lb/day)... Af = the allowable emission limit for a coating pursuant to Section 21S.204 expressed in kg/1 (lbs/gal) of coating solids. 8| = the volume of coating solids in 1/day (gal/day). in a coating as delivered to the coating, line. m = the number oj- coating lines included In the combined- emission rate: ; n = the number of different coatings delivered to a coating line. EacT'>--Uv& actual volatile organic material emissions from the coating plant in kg/day (Ibs/day). C| = the weight of volatile organic material-pec-volume of solids in kg/1 (Ib/gal) for a coating. ' Of = the control efficiency by which emissions of volatile organlc.material from a coating are reduced through the use of control equipment. R * = theappllcaWe.vatattle^acgaaic. material emission limit pursuant to Section 215.204,. for a. coating-in kg/1 (Ib/gal). Sf = the density of the volatile organic material ,1n a, coating in kg/1 (lb/gal). d) the owner or operator of the coating plant shall maintain records of the density of the votatii e organtc,,mater.ia1 in each coating... the quantity and volatile organic outerlal and solids content of each coating applied and. the llney ta.wivlch. coating Isapplled... In such,a manner so as to demonstrate continuing compliance with the combined allowable . emissions, ej Except for emission sources subject to Section 215.301 or 215.302. credits from emlssioA.sflurces at th&.CQat.iog plant that are subject !.to this Part, other than coating lines, .may be given, to the extent that emissions are reduced, from the allowable . emission limits for such emission sources contained.in either this Part, or any ex1sting.Qpetat\ng^ftermit^,wh1chever limit is less. (Source: Amended at 12 111. Reg. 815. effective Oecember 24. 1987) ~~ Section 2IS..208 Testing Methods for Solvent Content, a) The following methods.of analyzing the solvent content of coatings, as revised from time to time, or any other equivalent procedure- .approved..b.y.,the..Ageocy....stoa.Hbe. used as applicable: 1) ASTM 0 1644-59Method A 2) ASTM 0 1475-60 3) ASTM 0 2369-73 4) f.eder.il.StatKUcd.14.ta.,, Method, .4082-1 toi