Document 6XQZe2Qmrb3pg8MJODvBBobg

602SO1O1* ENGINEERING SPECIFICATION Texas Division PLAINTIFF'S EXHIBIT DOW-2401 46-581 (g) 1-15-77 Page 1 of 7 ITEM N-228 NOTC N--21 3 NOTE NOTE PIPE P-28B P-278 P-3B P-32C FITTINGS SIZE HYDROCARBON PROCESS PIPING 275 PSIG MAX a -20 TO lOOF 150 PSIG MAX S 100 TO *-450F DESCRIPTION l SCREWED FITTINGS SHALL NOT BE USED IN PIPING SYSTEMS WHERE VIBRATION IS PRESENT. I.E.. COMPRESSOR PIPING, ETC. 2 ACL NIPPLES USED FOR DRAINS' AND VENTS. SHALL BE MIN. SCH. 80. 3 PIPING SHALL BE INSTALLED IN ACCORDANCE WITH ENGR SPEC 47-110. 4 ALL NIPPLES USED FOR INSTRUMENT AND TEST CONNECTIONS SHALL BE HEX BAR STOCK WITH MIN 391" ID. 5 G--44 GASKET TO BE USED ONLY WHERE SPECIFIED PIPING DRAWINGS. 1/2 THRU 1 1/2 1/2 THRU 1 1/2 2 THRU 24 16 THRU 54 ASTM A"106 GR B, EX STRONG SEAMLESS STEEL n I PE ASTM A--106 GR B, STD WEIGHT SEAMLESS STEEL PIPE. ASTM A--53 OR API-5L GR B, STD WEIGHT SEAMLESS STEEL PIPE. ASTM A--155 GR C50 OR CSS CLASS 1, 0.375 WALL ELECTRIC FUSION WELDED STEEL PIPE. ELTX-66 j I N--234 C-3C 1/2 THRU 1 1/2 1/2 THRU 1 1/2 2000-LB THREADED FORGED STEEL FITTINGS, AST M A-- 10S , ANSI B16.ll. 3000-LB FITTINGS MAY BE SUBSTITUTED FOR 2000-LB FITTINGS. 3000-LB THREADED FORGED STEEL COUPLING, ASTM A--105, ANSI 816.11. ST0405289 062S0*?0if ENGINEERING SPECIFICATION Texas Division 46-581 1-15-77 Page 2 of 7 item C-14S C--41 R-22 C-54 U-2 PC-2 PC-26 ELT-64 C--. 14 C-54S PC-27 U--18 EL.TR--1 5B N--233 size DESCRIPTION -1/2 THRU 1 1/2 1 THRU 20 1/2 THRU 1 1/2 1/2 THRU 1 1/2 1/2 THRU 1 1/2 1/2 THRU l 1/2 1/2 THRU 1 1/2 1/2 THRU 1 1/2 1/2 THRU 1 1/2 1/2 THRU 1 1/2 1/2 THRU 1 1/2 1/2 THRU 1 1/2 2 THRU 24 3000--1.8 FORGED STEEL SOCKqLET. aSTM A-105. STD WEIGHT STEEL WELDOLET, ASTM A-105, EX STRONG STEEL SWAGED NIPPLE. ASTM A-106 OR A--5 3 GR 8, OR AISI C-1025 BARSTOCK, THREAOEO. BEVELED, PLAIN OR ANY COMBINATION OF ENDS. 3000-LB THREADED FORGED STEEL NIPOLET, ASTM A-105. DIMENSIONS PER BONNEY FORGE CATALOG W--8, PG. 29. 3000--LB THREADED FORGED STEEL UNION, ASTM A-105. AAR DIMENSIONS. STEEL TO STEEL SEAT, PETRO AAR OR VOGT 1931. THREAOEO SOLID STEEL HEX HEAD PLUG, ASTM A-105. ANSI 816.11. 3000-LB THREADED FORGED STEEL CAP, ASTM A-105. ANSI B16.11. 3000-LB SOCKET WELDING FORGED STEEL FITTINGS. ASTM A-105. ANSI B16.ll. 3000-LB SOCKET WELDING FORGED STEEL COUPLING. ANSI B16.ll, OR 3000-LB SOCKOLET. ASTM A-105. FOR WELDING IN. 3000-LB SOCKET WELDING FORGED STEEL NIPOLET, ASTM A-105, DIMENSIONS PER FORGE CATALOG W-8. PG.29. BONNEY 3000-LB SOCKET WELD FORGED STEEL CAP. ASTM A-105. FOR UNION USE SOCKET WELDING FLANGES. STD WEIGHT SEAMLESS STEEL WELDING FITTINGS. ASTM A-234 GR WPB, ANSI B16.9. REDUCING ELLS 6 INCH AND SMALLER SHALL BE SEAMLESS. REDUCING ELLS 8 INCH AND LARGER SHALL HAVE WELDS RADIOGRAPHED PER THE REQUIREMENTS OF ASTM A-234 AND PARAGRAPH UW-51 OF SECTION VIII OF ASME BOILER AND PRESSURE VESSEL CODE, FOR 100 PER CENT JOINT EFFICIENCY. ST0405290 ENGINEERING SPECIFICATION Texas Division 46-581 1-15-77 Page 3 of 7 i ITEM SIZE description PC-51B PC-51SW FLANGES F-19-RF F--14-- RF F-l-RF F-- 24--RF F-98A 2 THRU 24 26 THRU 48 1/2 THRU 1 1/2 1/2 THRU l 1/2 2 THRU 24 2 THRU 24 26 THRU 54 F-3-RF F-98B 1/2 THRU 24 26 THRU 54 N--66 BRANCH CONNECTIONS BC-7S STD WEIGHT SEAMLESS STEEL WELDING CAP, ASTm A--234 GR WPS, ANSI 616*9. STO WEIGHT STEEL WELDING CAP, ASTM A-234 GR WPB, ANSI B16.9. - 150-LB RAISED FACE THREAOED FLANGE, ASTM A--105, ANSI 016.5* 150-LB RAISED FACE SUCKET WELDING FLANGE, ASTM A--105, ANSI BI6.5. q ST0405291 150-LB RAISED FACE SLIP-ON FLANGE* ASTM A-- 1 0 5 i. ANSI 816*5* 150-LB RAISED FACE WELDING NECK FLANGE. ASTM A-I05. ANSI 316.5, 30RE TO MATCH WELDING FITTINGS. O CJ\ ME> CLASS 175 (150-LB ASME) LARGE DIA RAISED FACE SLIP-ON FLANGE. ASTM A-105. FLANGE OVER 3 INCH THICK TO BE NORMALIZED. DIMENSIONS TO BE IN ACCORDANCE WITH TAYLOR FORGE CATALOG 722 PAGE 32. CRANE CATALOG 61 PAGE 108. TUBE TURN PART NO 713 COD) OR LADISH PART NO 506. BORE TO MATCH OD PIPE. 150-LB RAISED FACE BLIND FLANGE, ASTM A-105. ANSI 316.5. CLASS 175 (150-LB ASME> LARGE DIA RAISED FACE BLIND FLANGE, ASTM A-105. FLANGE OVER 3 INCH THICK TO BE NORMALIZED. DIMENSIONS TO BE IN ACCORDANCE WITH TAYLOR FORGE CATALOG 722 PAGE 32. CRANE CATALOG 61 PAGE 108, TUBE TURN PART NO 723 (OD) OR LADISH PART NO 507. REDUCING flanges shall be slip-on type EXCEPT ON SIZES WHERE THREADED FITTINGS ARE specified, threaded reducing flanges may be USED. FOR SOCKET WELDING AND THREADED PIPING. USE STRAIGHT SIZE TEE ONLY. USE SOCKET WELDING REDUCER INSERT OR SWAGE NIPPLE WHEN BRANCH ST0405291 ST0405292 ENGINEERING SPECIFICATION Texas Division 46-581 (g) 1-15-77 Page 4 of 7 ITEM BC-M2 SIZE GASKETS G-40 6-44 JOINT COMPOUND JC-- 1 5 FLANGE BOLTS B-- A19 387 Q N-231 BOLT LUBRICANT BL-2 VALVES * V-- 367 1/2 THRU 1 1/2 DESCRIPT ION IS SMALLER THAN HEADER. FOR WELDED PIPING. USE STRAIGHT SIZE OR REDUCING TEE. WELOOl-ET OR REINFORCING PAD MAY BE USED ON REDUCING BRANCH CONNECTIONS IN PLACE OF REDUCING TEE. FOR 3/4 INCH AND SMALLER. USE SOCKOLET WELDED TO HEADER. SPIRAL-WOUND. 304 STAINLESS STEEL-ASBESTOS GASKET, FLEXITALLIC CG. GARLOCK CR. LAMONS WR, JM-9I3 OR STERLING GR. SPIRAL-WOUND 304 STAINLESS STEEL-ASBESTOS GASKET WITH STAINLESS STEEL INNER AND OUTER COMPRESSION-GAUGE RINGS. ID SAME AS SCH SS PIPE. FLEXITALLIC CGI. GARLOCK CR I . LAMONS WRI, JM-913-.IR OR STERLING GR-- IR TEFLON TAPE 1/2 INCH BY 3 MIL THICKNESS. ASTM A--193 GR 87 QUENCHED AND TEMPERED ALLOY STEEL STUD BOLTS WITH ASTM A-194 GR 2H HEAVY HEX NUTS. APPLY BOLT LUBRICANT TO THE FULL LENGTH OF THREADS. FEL PRO C 5--A. 800-LB SCREWED OS/Y SOLID WEDGE GATE VALVE. CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM WITH HARD-FACED SEAT R-INGS. BOLTED BONNET. 1/2 THRU 1 1/2 800-LB SOCKET WELDING OS/Y GATE VALVE. CARBON STEEL BODY, HARD-FACED SEAT RINGS. WELDED BONNET. ST0405292 6220101$ ENGINEERING SPECIFICATION Texas Division 46-581 1-15-77 Page 5 of 7 ITEM * V-- 474 * V-- 617 + V-56 ** V-56F NOTE * V--084 * V--471 * V-472 SIZE i/2 THRU i 1/2 DESCRIPTION ,800-LB SOCKET WELDING OS/Y SOL IO WEDGE GATE VALVE. CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM WITH HARD FACED SEAT RINGS, BOLTED BONNET 1/2 THRU 1 1/2 150-L8 FLANGED OS/Y GATE VALVE. CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM WITH HARD-FACED SEATS. 2 THRU 24 150-LB FLANGED OS/Y WEDGE GATE VALVE. CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM WITH NICKEL ALLOY SEAT RINGS. 2 THRU 24 150-LB FLANGED OS/Y FLEXIBLE DISC GATE VALVE. CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM ITH NICKEL ALLOY SEAT RINGS. 30 THRU 54 V-56F TO HAVE BLEED VALVE BETWEEN SEATS. VALVE SHALL BE TESTED FOR DOUBLE BLOCK ANO BLEED SERVICE. 150-LB RF FLANGED GATE VALVE. CARBON STEEL BODY AND GATE, 315 ST AI ..LESS STEEL STEM, SEAT, SEAT RING ANO SPRING. FLANGE CONNECTIONS TO BE DRILLED AND TAPPED TO MATCH CLASS 175 FLANGES PER TAYLOR FORGE CATALOG NO. 722. PAGE 32. VALVE TO HAVE METAL TO METAL SEATS WHICH ARE INTERCHANGEABLE WITH STANDARD SEATS AND DISC. MAXIMUM VALVE LEAKAGE RATE OF 25CC PER HOUR PER INCH OF VALVE DIAMETER OF WATER AT FULL DIFFERENTIAL PRESSURE AT AMBIENT TEMP. ALL PARTS TO BE INERT TO AROMATIC HYDROCARBONS. 1/2 THRU 1 1/2 600-LB SCREWED OS/Y FLOCONTROL TYPE GLOBE VALVE, CARBON STEEL BODY, CHROME STAINLESS TRIM. 1/2 THRU 1 1/2 600-L8 SOCKET WELDING OS/Y FLOCONTROL TYPE GLOBE VALVE. CARBON STEEL BODY, CHROME STAINLESS TRIM. ST0405293 ST0U05294 ^ ENGINEERING SPECIFICATION Texas Division 46-581 (g) 1-15.77 Page 6 of 7 ITEM *V-36 *V-10 2 * V-594 4V-46 * V-399 * V-6828 NOTE *V--45 8 * V--459 V--487 * V-- 4016 SIZE 2 THRU 12 DESCRIPTION 150-LB FLANGED OS/Y GLOBE VALVE, CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM. 1/2 THRU l 1/2 600-LB SCREWED HORIZONTAL LIFT CHECK VALVE, CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM, BOLTED CAP. 1/2 THRU 1 1/2 6`00-LB SOCKET WELDING HORIZONTAL LIFT CHECK VALVE, CARBON STEEL BODY, 13 CHROME ALLOY STEEL TRIM, BOLTED CAP. 1 THRU 16 150-LB FLANGED HORIZONTAL SWING CHECK VALVE. CARBON STEEL BUOY, 13 CHROME ALLOY STEEL TRIM, BOLTED CAP. 10 THRU 24 150-LB RF WAFER CHECK VALVE WITH EXTENDED BODY AND PIN STOP, CARBON STEEL BODY AND DISC. EXTRA HEAVY INTEGRAL HINGE LUGS, METAL SEAT, INCONEL SPRING. 1/2 THRU 1 1/2 800-LB FEMALE SOCKET WELDING BY SCREWED OS/Y GATE VALVE, CARBON STEEL. BODY, HARD-FACED SEAT RINGS. BOLTED BONNET. V--458, V--459, AND V-437 HAVE A MAXIMUM TEMP. OF 350F. 2 150-LB FLANGED. 3-WAY, 2-PORT. 90 OEG TURN. TRANSFLO TYPE PLUG VALVE WITH TAPERED PLUG. CARBON STEEL. WRENCH OPERATED, LUBRICATED. 3 THRU 4 150-LB FLANGED. 3-WAY, 2-PORT, 90 DEG TURN. TRANSFLO TYPE PLUG VALVE WITH TAPERED PLUG, CARBON STEEL. WRENCH OPERATED, LUBRICATED. 6 THRU 8 2 THRU 16 150-LB FLANGED, 3-WAY, 2-PORT, 90 DEG TRANSFLO TYPE PLUG VALVE WITH TAPEREO CARBON STEEL. WORM GEAR OPERATED, LUBRICATED. TURN. PLUG. y 150-LB WELD END 3-BOLT LINE BLIND VALVE* ST0405294 ENGINEERING SPECIFICATION Texas Division 46-581 1-15-77 Page 7 of 7 ITEM * V--401V _ * V--401T * SIZE 2 THRO 16 2 THRU 16 DESCRIPTION * CARBON STEEL BODY AND SPECTACLE PLATE, SAFETY LOCKING PIN, BUNA-N PACKED PLATE. BORE TO MATCH PIPE. 150-LB WELD END 3-30LT LINE BLIND VALVE. CARBON STEEL BODY ANO SPECTACLE PLATE. .. .SAFETY LOCKING PIN, VlTON-PACKEO PLATE. BORE TO MATCH PIPE. 150-LB WELD END 3-BOLT LINE BLIND VALVE, CARBON STEEL BODY ANO SPECTACLE PLATE. SAFETY LOCKING PIN. TEFLON-PACKED PLATE. BORE TO MATCH PIPE. Asterisk indicates VSP stock items. See Engr. Spec 48-902 for stock numbers. IT0405295 ST0405295