Document 6B6dgDoVqky2d37LxXnGwnKm9

DownloadSearchable PDFRandom document
CRANE DISCOUNT SHEET FR2 NOVEMBER 24, 1958 IRON SCREWED AND FLANGED FITTINGS IRON FLANGES BRASS SCREWED FITTINGS BRASS FLANGES STEEL SCREWED FITTINGS STEEL SOCKET-WELDING FITTINGS CORROSION-RESISTANT FITTINGS NIPPLES AND COUPLINGS I GASKETS, THREAD COMPOUND, SHEET PACKING CATALOG BOLTS AND STUDS NUMBER 53 This Discount Sheet Cancels Discount Sheet FR1 Dated June 30, 1958 and Subsequent Changes Effective September 22, 1958--Brass and Iron Fittings Founded by R. T. Crane 1855 CRANE CO. 836 S. Michigan Avenue Chicago 5, Illinois DISCOUNTS SUBJECT TO CHANGE WITHOUT NOTICE Printed in U. S. K 2 CATALOG . PAGE 1 FIGURE NO. CRANE DISCOUNT 140 & 141 144 145 146 & 148 150 & 151 156 157 160 to 163 166 167 MALLEABLE IRON SCREWED FITTINGS AND i BOILER FITTINGS ) 1 50-Pound Malleable Iron Fittings: i 90 Elbows, 45 Elbows, 90 Street Elbows, and | Black.......... j Tees, Vi-inch, %-ineh, and 1-inch, Banded ; . Pattern Only, Straight Sizes Only..................... Galvanized All Other Elbows, Tees, Crosses, Y-Bends, Reducers,] Couplings, Caps, Locknuts, Return Bends, Exten-l^ack.......... sion Pieces, Waste Nuts, and Drop Elbows, Galvanized Straight and Reducing Sizes............................... 9 13 Plus 33 Plus 27 586, 587 & 589 586Vi, 588 & 589'/2 260E to 279E Air Tested 150-Pound Malleable Iron Banded 90 and 45 Elbows, 90| Street Elbows, Tees, Crosses, Couplings, Reducers, and Return Bends' Only -- Add 20% for Air Testing. Circulating Boiler Fittings, Galvanized: Elbows and Couplings X Elbows and Couplings Plus 27 300-Pound and AAR Malleable Iron Fittings: Black.......................................... '............... Galvanized Plus 33 Plus 27 CAST IRON SCREWED FITTINGS, SPRINKLER FITTINGS, AND DRAINAGE FITTINGS 125-Pound Cast Iron Screwed Fittings, Straight and Reducing Sizes: 90 Elbows, 45 Elbows, Tees, Concentric and Eccentric Reducers, Right Hand Only: 1 -inch and smaller Black......... , Galvanized Plus 2 29 1 Va, 1 Vi, and 2-inch Black......... . Galvanized Plus 12 23 All Other Elbows (Including Right and Left and] Pitched), Tees, Crosses, Y-Bends, Reducers, Black.......... Eccentric Reducers, Caps, Locknuts, and Return Galvanized Bends....................................................................... Plus 22 19 125-Pound Cast Iron Fittings, Sprinkler Type, Black and Galvanized.... X 182E to 190E 250-Pound Cast Iron Screwed Elbows and Tees, Short Pattern: Black....................................................................................... Galvanized................................................................................. Plus 22 19 1000 to 1070 Cast Iron Drainage Fittings: Black (Japanned), and Uncoated (Plain) Galvanized.................................................... List List IRON PLUGS AND BUSHINGS | Iron Plugs; Square Head, Countersunk, and Bar, Black and Galvanized Plus 22 Iron Bushings; Hexagon, Face, and Eccentric, Black and Galvanized........ | Plus 35 *Change in Price X Discontinued Prices on Application CATALOG PAGE CRANE 3 DISCOUNT STEEL NIPPLES, STEEL PIPE COUPLINGS, PIPE CLAMPS Circular Steel Nipples -- Revised Lisi Prices Effective November 7 7, 7 958: No. 330 j Made From Welded Pipe Conforming to ASTM Specification A-120 Standard, Right Hand: Ve to 6-inch, Close to 12 inches Long: Black................................................................................................. '.......... Galvanized......... ...................................................................................... Extra Strong, Right Hand: ' Vs to 6-inch, Close to 12 inches Long: Black............................................................................................................ Galvanized................................................................................................. Standard, Right and Left: Vs to 6-inch, 4 inches Long Only: Black...................................... , Galvanized.................... ....... Standard Butt Nipples, Right Hand, Vs to 6-inch, Black and Galvanized--Add 700% to Net Price of Close Nipples. Standard Tank Nipples, Right Hand 69* 65* 58* 40* 38* 30* X Made From Seamless Pipe Conforming to ASTM Specification A-53 Standard, Right Hand: 2 to 4-inch, Close to 12 inches Long, Black Only........................................ 5 and 6-inch, Close to 12 inches Long: Black........................................................................................................... Galvanized................................................................................................ 8,10 and 12-inch, Close to 12 inches Long, Black Only.......................... Extra Strong, Right Hand: 2 to 4-inch, Close to 12 inches Long, Black Only........................................ 5 and 6-inch, Close to 12 inches Long: Black........................................................................................................... Galvanized................................................................................................. 8,10 and 12-inch, Close to 12 inches Long, Black Only.......................... Double Extra Strong, Right Hand, Black Only: 2 to 4-inch, Close to 12 inches Long............................................................... 51* 69* 65* 61* 38* 58* 40* 51* PI. 120* Made From Seamless Pipe Conforming to ASTM Specification A-106 Standard and Extra Strong, Right Hand, 2 to 12-inch, Close to 12 inches Long, Black Only.......................................................................................................................................... Change in Price X Discontinued Prices on Application 4 CATALOG PAGE CRANE STEEL NIPPLES, STEEL PIPE COUPLINGS, PIPE CLAMPS -- Continued -- Circular ; No. 330 ! j Steel Nipples, Continued -- Revised List Prices Effective November 17, 1958: Made From Seamless Pressure Pipe Conforming to ASTM Specification A-53 and A-106 Standard, Right Hand, Black Only: 14 to 14-inch, Close to 12 inches Long.................................................. 3A to 114-inch, Close to 12 inches Long............................................... Extra Strong, Right Hand, Black Only: 14 to 14-inch, Close to 12 inches Long.................................................. 3A to 114-inch, Close to 12 inches Long............................................... Double Extra Strong, Right Hand, Black Only: 14-inch, Close to 12 inches Long............................................................ 3A to 114-inch, Close to 1 2 inches Long............................................... 170 Steel Pipe Couplings, All Types 171 Single Strap and Double Strap Clamps, Black and Galvanized DISCOUNT Pl. 1* 10* PI. 13* 1* PI. 240* Pl. 196* X 174 to 180 FIGURE NO. 1218 & 1219 1280 & 1281 128014 1290 1282 & 1283 1284 & 1285 519 &519'/z 590 & 592 198E 19814E 197E IRON UNIONS, UNION FITTINGS, AND FLANGE UNIONS (Including AAR Forged Steel Unions) - Malleable Iron Unions and Union Fittings: . 150-Pound Unions: Gasket Type, Female, Black and Galvanized.................................. 13 Brass to Iron Seat, Female, and Male and Female: 42 50 All-Iron Seat, Female: 27 36 150-Pound Union Fittings, Black and Galvanized: Union Elbows, Gasket Type.............................................................. List Union Elbows, Brass to Iron Seat........... ..................... ....................... Union Tees, Brass to Iron Seat...................................................................... Railroad Unions, Brass to Iron Seat, Black and Galvanized.................. Railroad Union Elbows, Brass to Iron Seat, Black and Galvanized.. 21 21 23 13 300-Pound Unions, Female, Black and Galvanized: Brass to Iron Seat............................................................................... 4 Plus 18 Brass to Brass Seat............................................................................ Plus 72 *Change in Price X Discontinued Prices on Application CATALOG PAGE FIGURE NO. CRANE 5 DISCOUNT IRON UNIONS, UNION FITTINGS, AND FLANGE UNIONS (Including AAR Forged Steel Unions) -- Continuad -- 174 to 180 819E& 819'AE 817E 890Eto 89816E 91916E 992Eto998l6E Malleable Iron Unions and Union Fittings, Continued: AAR Unions, Brass to Iron Seat, Black and Galvanized...................... AAR Reducing Air Pump Unions, Brass to Iron Seat, Black Only........ AAR Union Elbows and Tees, Brass to Iron Seat, Black Only............. AAR Unions, Brass to Steel Seat, with Steel Male Tail-Piece, Black Only..............................................................'.......................................... AAR Union Elbows and Tees. Brass to Steel Seat, with Steel Male Tail-Piece, Black Only........................................................................... Plus 18 Plus 18 Plus 18 Plus 18 Plus 18 180 950H & 953 Vi H 181 181 775 182 1589 & 1591 !6 AAR Forged Steel Unions, Brass to Steel Seat, Black Only......................... 33 125-Pound Cast Iron Flange Unions, Gasket Type, Black and Galvanized* Plus 54 Malleable Iron Three-Part Flange Unions, Brass to Iron Seat, Black Only. Plus 43 300-Pound Tongue and Groove Flange Unions, Gasket Type.................... Plus 6 184 to 186 186 187 187 188 522!6 52316 696E 52416 2104 & 2109 BRASS FITTINGS, NIPPLES, UNIONS, AND FLANGES 125 and 250-Pound Brass Screwed Fittings, Plugs and Bushings, Rough.. Plus 2 Red Brass Nipples.........................................'................................................... Brass Ground Joint Unions: . 125-Pound, Rough (New line -- not illustrated)...................................... Government Pattern, Rough...................................................................... 300-Pound, Rough...................................................................................... Plus 2 Plus 2 Plus 2 Brass Ground Joint Union Elbows............................................................. Plus 2 150 and 300-Pound Brass Screwed Companion Flanges........................... Plus 2 190 1 to 816 & 13 191 70 to 7416 & 79 MALLEABLE IRON RAILING FITTINGS Malleable Iron Ball Pattern Railing Fittings, Black and Galvanized: Threaded as Shown.............................................. ..................................... One or More Openings Reamed or Reamed and Drilled for Rivets. Malleable Iron Adjustable Railing Fittings, Black and Galvanized............ Plus 25 X 199 & 201 525 to 551 101E to 12556E 196, 198 & 200 IRON FLANGED FITTINGS AND FLANGES Cast Iron Flanged Fittings, Faced and Drilled, Black and Galvanized: 125-Pound Pattern: 12-inch and smaller ............................................................................. 14-inch and larger................................................................................ 250-Pound Pattern...................................................................................... Plus 25 Plus 79 Plus 25 Spot Facing Bolt Holes on Flanged Fittings.................................................... Plus 31 'Change in Price X Discontinued Prices on Application 6 CATALOG PAGE FIGURE NO. CRANE DISCOUNT 202 to 204 553, 555 & 557 202 to 204 203 151E to 155E IRON FLANGED FITTINGS AND FLANGES -- Continued -- Cast Iron Flanges, Faced and Drilled, Black and Galvanized: 125-Pound Screwed, Blind, and Reducing Screwed: ' 12-inch and smaller.............................................................................. 14-inch and larger................................................................................ 250-Pound Screwed, Blind, and Reducing Screwed............. .............. Plus 25 Plus 79 Plus 25 Spot Facing Bolt Holes on Flanges................................................................... Plus 31 Round Floor Flanges, Black and Galvanized: Cast Iron....................................................................................................... Malleable Iron............................................................................................. Plus 25. Plus 79 Cir. No. 326 Cir. No. 326 262 240 to 245, 380 to 388, 660 to 668 308, 309, 389, 600 to 602 760D to 764D FORGED AND CAST STEEL SCREWED FITTINGS 2000, 3000, and 6000-Pound W.O.G. Forged Carbon Steel Screwed Elbows, Tees, Crosses, Y-Bends, Couplings, Reducers, and Half Couplings -- Refer to Circular No. 326, October, 1956, for revised list prices effective October 8, 1956................................................................. 3000 and 6000-Pound W.O.G. Carbon Steel Plugs, Caps, and Bushings -- Refer to Circular No. 326, October, 1956, for revised list prices effective October 8, 1956................................................................. 1000-Pound W.O.G. Cast Steel Screwed Elbows and Tees (5" size and all reducing sizes discontinued): , Carbon Steel.................................... ........................................................... No. 5 Chrome-Molybdenum...................................................................... 25 25 PI. 9* PI. 48* 263 & 264 265 266 FORGED STEEL UNIONS, FLANGE UNIONS, AND COMBINATION ELBOWS 250H to 254H 246X 328D to 340D Forged Steel Ground Joint Unions: Brass to Steel and Steel to Steel Seats; Black with Cadmium Plated Ring or Cadmium Plated All Over....................................................... Steel to Chromium-Plated Steel Seat...................................................... 2000 and 6000-Pound W.O.G. Forged Steel Ground Joint Flange Unions. 33 33 14 1529 Forged Steel Combination Elbows, Complete................................................. X 270 & 271 525D to 1554D 277 Cir. No. 326 1240 to 1250, 1380 to 1390, 1460 to 1469, 1660 to 1669 CAST STEEL FLANGED FITTINGS AND STEEL SOCKET-WELDING FITTINGS Cast Steel Flanged Fittings.............................................................................. AA Forged Carbon Steel Socket-Welding Sleeve Couplings............................. 2000, 3000, 4000, and 6000-Pound W.O.G. Forged Carbon Steel Socket-Welding Elbows, Tees, Crosses, Y-Bends, Couplings, Reducers, Caps, and Reducer Inserts -- Refer to Circular No. 326, October, 1956, for revised list prices effective October 8, 1956...................... 25 *Change in Price X Discontinued Prices on Application AARefer to Net Price Schedule on Steel Flanged Fittings CATALOG PAGE FIGURE NO. CRANE 7 DISCOUNT STEEL BUTT-WELDING FITTINGS FORGED STEEL FLANGES For prices on the above, illustrated on pages 281 to 285, 294 and 295 of Catalog No. 53, refer to Net Price Schedules WF and FF. CORROSION-RESISTANT FITTINGS 383 18860 to 18891 18-8 Mo Screwed and Flanged Fittings, Flanges, and Unions.................. 29 414 1521, 1523, 1559, 1563 & 1570 414 1556 & 1556'/2 415 1545 & 1547 1555 & 1557 1582'/2 & 1583'/2 415 1574'/2, 1575'/2 & 1575% 416 FITTINGS, FLANGES, AND GASKETS FOR AMMONIA Elbows, Tees, and Return Bends for Ammonia...-.......................................... PI. 1 Companion Flanges for No. 1563 Return Bends, Black and Galvanized. Flanges for Ammonia: Screwed........................................................................................................ Special Forged Steel Screwed............................................................... PI. 7 PI. 7 PI. 7 PI. 7 Ferrosteel Return Bends and Tees with Union Ends....................................... PI. 7 Gaskets for Ammonia,- Cranite and Lead for Tongue and Groove Joints, and Canvas Wrapped Rubber for Boyle Joints........................................ PI. 12 422 to 424 SOLDER-JOINT FITTINGS Wrought Copper Solder-Joint Fittings............................................................. * 457 457 464 Not III. Cir. 328 466 & 467 468 to 471 472 & 474 to 476 473 476 476 476 Formula 425A BOLTING, PROTECTORS, THREAD COMPOUND, FACINGS, GASKETS, SHEET PACKING, GALVANIZING Bolting On Companion Flanges......................................................................... Wooden Flange Protectors................................................................................ Crane High Temperature Thread Compound................................................. Anti-Seize Thread Compound--List Prices: 1-Pound Can $2.10; 4-Pound Can, $7.00................................................................................. Machine Bolts--Revised List Prices Effective June 3,1957......................... Alloy Steel Bolt-Studs: Triplex......................................................................................................... Templex........................................................................................................ Special Facings for Steel Flanged Products.............................................. Gaskets for Flanged Joints: 1/16-inch Cranite....................................................................................... 1/16-inch "CC" Rubber............................................................................. 1/16-inch Cloth Inserted Rubber........................................................ .. 4-Ounce Canvas......................................... ................... ............................ Sheet Packing, Cranite and "CC" Rubber..................................................... Gaskets for Unions, Union Fittings, and Range Unions................................. Galvanizing Cast Steel Flanged Fittings......................................................... Galvanizing Forged Steel Flanges................................................................... ** ** X 14 32 4 AA PI. 12 PI. 12 PI. 12 X PI. 12 PI. 12 AA *Change in Price X Discontinued Prices on Application **Refer to Net Price Schedule SP ARefer to Net Price Schedule FF AARefer to Net Price Schedule on Steel Flanged Fittings 1 CRANE VALVES FITTINGS PIPE FABRICATED PIPING FR 3743