Document 5kn5yzyaewy1r5wdjVvVaNj0V

DownloadRandom document
Page 1 / 2 Certificate number: 40514/B0 BV File number: ACM137/106/2 Product code: 0725I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com TYPE APPROVAL CERTIFICATE This certificate is issued to AEGIR-MARINE BV Wijk bij Duurstede - NETHERLANDS for the type of product STERN TUBE SEALING GLANDS Prime Blue Requirements: BUREAU VERITAS Rules for the Classification of Steel Ships This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identified above which was found to comply with the relevant requirements mentioned above. This certificate is a renewal of certificate N 40514/A0 BV expiring on 02/03/2020 This certificate will expire on: 02 Mar 2025 For Bureau Veritas Marine & Offshore, At BV GRONINGEN, on 25 Oct 2019, John Mondt This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product, which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended during the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards apply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com. Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide. The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=pq5rej1f92 BV Mod. Ad.E 530 June 2017 This certificate consists of 2 page(s) Page 2 / 2 Certificate number: 40514/B0 BV THE SCHEDULE OF APPROVAL 1. PRODUCT DESCRIPTION: PRIMEBLUE Forward water lubricated stern tube sealing gland. Composed of one Rubber NBR sealing ring with stainless steel garter spring. Fitted with a Rubber NBR inflatable ring for safety purpose in stop condition. Fitted with a water inlet pipe. PRIMEBLUEseals are available in sizes from 50 mm to 690 mm by step of 20 mm. 2. DOCUMENTS AND DRAWINGS: Size, material and arrangement as per drawing n A-04-2-0000-000-00 dated 22-2-2013 Materials of parts Casings: Seal rings: Bolts and pipe Bronze. NBR SS 316 3. TEST REPORTS: AEGIR Pressure test report - test performed on 06 Dec 2013. ERT test report n 12238-2 dated 16 Dec 2013. 4. APPLICATION / LIMITATION: 4.1 - Forward Stern Tube Sealing Gland for water lubricated stern tube. 4.2 - On board installation & Maintenance requirements : Due consideration is to be paid to the Manufacturer's recommendations concerning the installation, inspection, operation and maintenance of the seal. 5. PRODUCTION SURVEY REQUIREMENTS: 5.1 - The Sealing Glands are to be supplied by AEGIR-MARINE BV in compliance with the type and the requirements described in this certificate. 5.2 - This type of product is within the category IBV of Bureau Veritas Rule Note NR320. 5.3 - BV product certificate is required. 6. MARKING OF PRODUCT: - Serial number. - Size. - Bureau Veritas Marks. 7. OTHERS: 7.1 - Tailshaft complete survey periodicity is to be as per the provisions of BV Rules Pt A, Ch. 2, Sec. 2 5.5. 7.2 - It is AEGIR-MARINE BV's responsibility to inform shipbuilders or their sub-contractors of the proper methods of fitting, use and general maintenance of the approved equipment and the conditions of this approval. 7.3 - This Certificate supersedes the TAC 40514/A0 BV issued on 02 March 2015 by the Society. *** END OF CERTIFICATE *** The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=pq5rej1f92 BV Mod. Ad.E 530 June 2017 This certificate consists of 2 page(s)