Document 5Ldn4Xy7rRLXbEdm3e4g7wey0

January 18, 1979 Supersedes Formula V-974 Dated: 12/15/78 MILFORD, VIRGINIA PLANT FORMULA READY MIX JOINT COMPOUND V-974 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA Raw Material Pyrophylite-SK Limestone Mica Methocel 8898-2 Proxel Miuugel FG Soda Ash Aqua-Fil K-8 Function Bulking Agent Filler Anti-cracking Water Retention Preservative Bulking Agent pH Stabilizer Bulking Agent RM Spec - 13 11 163 - 8 - Percent 4.901 , 79.029 .450 .343 .044 .715 .074 4.901 Lbs/Batch 100.0 1612.5 50.0 7.0 .9 35.0 1.5 100.0 Staramic 105*** DuPont JCM Nalco 71D-5 Acrysol ASE-60 Water* Adhesive Adhesive Defoamer Thickener Solvent 23 185 147 - .417 5.930 .196 -- 8.5 121.0 (13.6 j k-k-k'k 4.0 1000.0 (120 100.000 3040.4** *Approximately 56.5 lbs/100 lbs of active ingredients (this may vary + 8 gallons per batch). **0ne batch yields 49 fivef^lpails Ready Mix joint compound at 62 lbs/pail. ***Hamaco 267-may be substituted at an equal loading. ****As needed to reduce foaming. SPECIAL MIXING - Blend ingredients in following order: INSTRUCTIONS 1) Water/Proxel 2) JCM 3) Filler 4) Mix until filler is dispersed 5) Add Acrysol ASE-60 6) Mix until Ready Mix is smooth - pumping viscosity should be 620 + 20 WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For machine tools add 7 gallons 1^0 (400 + 20) pH Minimum - 9.0 Maximum - 9.5 (24 hrs.) SGP 0017786 continued ofi page 2 . . 6 June 18, 1979 Supersedes Formula V-974 Dated: 6/D8/79 MILFORD, VIRGINIA PLANT FORMULA READY MIX JOINT COMPOUND V-974 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. FORMULA RAW MATERIAL FUNCTION RM SPEC PERCENT LBS/BATCH Pyrophylite-SK -/ Limestone Mica Methocel 8898-2 -/ PMA-30 Minugel FG Soda Ash Aqua-Fil K-8 Staramic 105*** DuPont JCM Nalco 71D-5 -/ Paragum 146 **** Water* Bulking Agent Filler Anti-cracking Water REtention Preservative Bulking Agent pH Stabilizer Bulking Agent Adhesive Adhesive Defoamer Thickener Solvent - 13 11 163 - 8 - - 23 185 147 - -- 4.901 78.980 2.450 .343 .045 1.715 .074 4.901 .417 5.930 .245 100.00 1611.50 50.00 7.00 .91 35.00 1.50 100.00 8.50 121.00 (13.6' **** 5.00 1000.00(120 100.000 3040.41** *Approximately 56.6 lbs/100 lbs of active ingredients (this may vary + 8 gallons per batch). **One batch yields 49 five gal pails Ready Mix joint compount at 62 lbs/pail. ***Hamaco 267 may be substituted at an equal loading. **** Acrysol ASE-60 may be substituted at a loading of 4 lbs/batch (.198%). / SPECIAL MIXING INSTRUCTIONS Blend ingredients in following order: 1) Water/PMA-30 2) JCM 3) Filler 4) Mix until filler is dispersed 5) Add Paragum-146 6) Mix until Ready Mix is smooth - pumping viscosity should be 580 + 20 WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender:(580+20) For machine tools add 7 gallons I^O (470+20) PH Minimum - 9.0 Maximum - 9.5 (24 hrs.) SGP 0017787 continued on page 2 . . SGP 0017785 MILFORD FORMULA # 974 ASBESTOS CONTAINING PRODUCTS