Document 5DeQpBV58Vm1xEgXqgYk56LeJ

d-l&f |50M) INTER-OFFIQE MEMO T E ?! M E C 0 CHEMICALS, IHC. H.Bo Carr at Burlington date June 16, 1971 from p.w. Kanzler at Burlington subject Raw Material Handling and Testing copy to H.R. Horton R. Roe v/File Reference: (l) Meeting 5/19/71 in Flemington (2) Memo F.W. Kanzler to H.B. Carr dated 5/26/71 As -a follow-up to the revision submitted with the referenced memo, the ''Raw Material Sampling Procedures" and the ''Request for Raw Material Approval" have been prepared. In addition, a revised version of the "Raw Material Receiving Form" is attached. Again your comments are requested. Please have suggestions and comments back to me no later than/5/21/71. Also .attached are the self-sticking labels which will be used once the new "Raw Material Identification, Handling and Dispo sition" has been issued. Attachments (6). FWK/jt F.W. Kanzler COLOR!TE 014114 TENNECO PLASTICS DIVISION TENNECO CHEMICALS, INC. SECTION 5 RAW MATERIAL SAMPLING PROCEDURES Raw Material Code Number Raw Material 90-012-05 Tributyl Phosphate Sample Frequency 1/shipment Sample Size 1 qt jar Analysis Performed By QC Specific Gravity Refractive Index AC IR 85-015-05 80-018-06 Lauroyl Peroxide * Aqueous Ammonia (28#) < 5 samples/ 1000 lbs/lot 1 12-02. cup/sample QC Contamination AC Assay A( 0) 1/truck 1 qt jar QC Color Odor Specific Gravity AC Assay COLORITE 014115 80-021-06 90-025-06 DHW-80 (40#) Sodium Lauryl Sulfate 1/truck \ 1/truck 1 qt jar QC Total Solids PH AC IR 1 qt jar QC Total Solids pH Viscosity AC Cloud Point fo EAS Page 2 RAW MATERIAL SAMPLING PROCEDURES Raw Material Code Number Raw Material 90-030-05 Colloids 58IB Sample Frequency 1/shipment Sample Size 1 qt jar Analysis Performed By QC Odor PH 90-032-04 Caustic Flakes l/shipment 1 8-oz jar QC Volatiles Contamination AC Assay IR 90-033-01 Trisodium Phosphate 1/shipment 1 qt jar QC Screen Analysis Contamination AC IR 95-034-01 Sodium Carbonate (Soda Ash) 1/shipment 1 8-oz jar QC Screen Analysis PH AC IR 90-040-06 Lauryl Alcohol 1/truck \ 1 qt jar QC Color Odor Specific Gravity Refractive Index AC G.C. IR COLOR!TE 014116 90-041-05 Tween 20 1/shipment 1 qt jar QC Specific Gravity Refractive Index Page 5 Rav; Material Code Number 80-050-06 RAW MATERIAL SAMPLING PROCEDURES Raw Material Vinyl Chloride Monomer Sample Frequency 1/tank car Sample Size 1 gas sample container 1 Analysis Performed By QC Odor G.C. Identification Residues If needed: Moisture Acidity Iron AC G.C. Light Ends on every 10th car If needed: Acetylene Nitrogen Trace Oxygen 80-051-06 Vinyl Acetate Monomer 1/tank car or 1/truck 1 qt jar QC Specific Gravity Refractive Index Color AC IR G.C. If needed: Acidity Hydroquinone COLORITE 014117 8O-O56-O5 Triallyl Isocyanurate (T.A.I.C.) 1/shipment V\ 1 qt jar QC Refractive Index Viscosity AC IR If needed: Gel Time Polymer Contamina tion r Page 4 Raw Material Code Number 95-001-01, -002-, -008- RAW MATERIAL SAMPLING PROCEDURES Raw. Material Methocel Sample Frequency 1 sample/pallet Sample Size 1 qt jar Analysis Performed By QC Moisture Screen Analysis Viscosity Contamination 90-010-05 Diallyl Maleate (E.I.) l/shipment QC Specific Gravity Refractive Index AC Acidity 95-014-01 Sodium Bicarbonate 1/shipment QC Screen Analysis pH Contamination 85-015-05 Ionol 1/shipment 1 8-oz jar QC Refractive Index CHLORITE 014118 0-016-09, -10, -11, -12 t 90-100-05 t-Butyl Peroxypivalate (Lupersol 11) Up to 20 cartons/ lot: Use the sq. root system for sampling,* if more than 20 cartons/ lot; 1 sample/5 cartons/lot 2-oz vial Epoxol 9-5 \ 1/shipment 1 qt jar AC Assay A(0) AC Viscosity Specific Gravity 90-102-05 Foam-Trol 129B 1/shipment 1 qt jar QC Viscosity Specific Gravity Page 5 RAW MATERIAL SAMPLING PROCEDURES Raw Material Code Number 90-101-05 Raw Material Or gano-Silicone Fluid L-522 Sample Frequency 1/shipment Sample Size 1 qt Jar v Analysis P>fformed By AC Viscosity Specific Gravity * go-042-06 Tridecanol 80-105-05 Octadecene-1 1/truck 1/shipment 1 qt jar 1 qt jar QC Specific Gravity Refractive Index AC IR G.C. / QC Specific Gravity Refractive Index AC IR G.C. COLORITE 0X 4119 95.000-01 1 \ 1 1 1 1 90-051-05 1 1 L i 90-049-05 80-052-06 Polyvinyl Alcohol Silicone Antifoam AF-60 Heptane Trichloroethylene 1/shipment 1/shipment s l/shipment 1/truck 1 qt jar QC pH Volatiles Contamination Screen Analysis AC IR 1 qt jar QC Total Solids Viscosity 1 qt Jar 1 qt jar QC Specific Gravity Refractive Index QC Specific Gravity Refractive Index AC IR Page 6 RAW MATERIAL SAMPLING PROCEDURES Raw Material Code Number Raw Material 95-053-05 Styrene Monomer Sample Frequency 1/shipment Sample Size 1 qt jar Analysis Performed By QC Specific Gravity Refractive Index 95-004-04, -005-, -107- Gelatin 1/shipment 1 qt jar 0,0 Viscosity pH Contamination Screen Analysis - 80-029-05 Ninol 1281 1/shipment 1 qt jar QC Refractive Index Specific Gravity AC IR 80-114-12 Di(2-ethylhexyl) peroxydicarbonate 40^ (Lupersol 223M) Up to 20 cartons/ lot: Use the sq. root system for sampling; if more than 20 cartons/ lot: 1 sample/5 cartons/lot 2-oz vial AC Assay A(0) COIiORXTE 0 1 4 X 2 0 85-115-16 80-071-15 Ammonium Persulfate Sulfuric Acid 1/shipment \ 1/lot 8-oz jar 1 qt jar QC Screen Analysis AC Assay AC Specific Gravity QC Assay 80-120-07 Anhydrous Ammonia TENNECO PLASTICS DIVISION BURLINGTON PLANT REQUEST FOR RAW MATERIAL APPROVAL \ Raw Material Supplier__________________________________________________ _ Name Address Justification Check One: New Material Alternate Supplier Sample Forwarded with Request Sample to be Forwarded Technical Literature Being Forwarded Technical Literature to be For warded FDA Sanction Paragraphs FDA Sanction Required and Being Requested By FDA Sanction not Required for the Specific End Use, but Should be Ver ified for Possible Future Use. FDA Sanction Cannot be Obtained and this Material Cannot be Used in the Manufacture of Products Requiring FDA Sanction. Tests and Specifications Recommended for this Material: Test Specification Name Date COLORITE 014121 \ Material Supplier Lot/Car No. Sample Taken By TENNECO PLASTICS DIVISION BURLINGTON PLANT RAW MATERIAL RECEIVING FORM Date Received Order No. Seal No. Quantity Submitted to QC: Date Time QUALITY CONTROL REPORT Material and Lot Nos. Checked_____________________________________________ Is Shipment Properly Tagged Before and After Release?_____________ Is This a Pre-Shipment Sample^? Regular Shipment?____________________ Material is Approved - Rejected - Held for Recheck (Circle) REASONS FOR REJECTION Details of QC Analysis are Entered on Page of Quality Control Log book and Copy of This Form is Properly Filled. Date________________________________ _________ Time Foreman Notified Signed QC Technician L-103 Rev. No. 3 COLORITE 014122 6/71  :: . '\ hold for testing 1 .it's- ; COLORITE 014123 \ . *::.; \ ... H; : -\:V':>/>; 'iV . - -. . r; ' ^ i--^.;--Av;: COLORXTE 014124 \ COLORITE 014125