Document 4vn39GyVx4Yd3EpDZJe96LxXQ
106
CHAPTERS
1955 Guide-.*
PERIODIC AND TRANSIENT HEAT FLOW
The foregoing data and examples dealt with steady-state heat transfer (not varying with time). In most practical heat transfer problems the heat flow depends upon time. Such cases can usually be divided into two i classes: periodic-and transient. Periodic heat transfer repeats periodically,; lb time. Transient heat transfer exhibits no periodicity. Graphical, ana- ' lytical and numerical methods are available for solving transient or periodic heat flow problems.4'6'10,11-12 Graphical and numerical methods are the : most versatile, and can be applied with minimum mathematical training.
A large number of analytical Solutions for the case of heat conduction in variously shaped solids are available in the literature. Table 7 gives a
Fia. 9. Example of a Graphical Solution to a'Problem in Transient Heat Conduction.
summary of the cases reported and tabulated. Many more analytical solutions are available in the form of infinite series,11'12'18-19 but are not tabulated. Certain complex cases may be treated by combining the simple analytical solutionis as discussed in Reference 17. (See also Reference 20).
Frequently, transient heat flow problems in one dimension have boundary conditions which make the problem difficult to treat analytically. In such cases, recourse may be made to a graphical method of solution sometimes called the Schmidt method.410'19'21-22 This method will be briefly outlined for the case of transient heat flow in a slab insulated on one face, and suddenly exposed on the other face through a fixed thermal resistance to a higher temperature. The technique is general, however, and methods may be. devised for any boundary conditions,6'21 and also, for cine dimensional (radial) heat flow in spheres and cylinders.22'23
Heat Transfer
107
Table 7. Analytical Solutions for Heat Conduction in Variously Shaped Solids
Shape op Solid
' Boundary Conditions
Data Available in Graphs
Semi-infinite
Surface temperature
changed.
.;
suddenly
Temperature -distribution in solid'as
.. :a function of time.
-
: . References: (4) p. 37, (5) p.V-28; (10)
p. 254; (13) p. 46.
Heat flow from surface as a function
of time.
,ts References: (10) pp.256,267; (13) p.47.
A steady flow of heat Is suddenly ap Temperature distribution as a func
plied to the surface.
tion of time.
Reference: (10) p. 257.
The surface temperature has been Temperature distribution as a func
varying sinusoidally with time for tion of time.
a long time.
Reference: (10) p.296.
Heat flow from surface as a function of time.
Reference: (10) p.296.
Semi-infinite with fluid free surface.
The temperature of the fluid in con tact with the surface a sudden change in temperature. (The sur
face conductance is constant) .
Temperature distribution as a funo tion of time.
References: (4) p. 37; (5) pp. V-45,46,
The temperature of the fluid in con tact with the surface has been varyt ng sinusoidally with time for
a long time. (The surface con. ductance is constant.)
Temperature distribution as a func tion of time.
Reference: (10) p. 298.
Heat flow from the surface as a func tion of time.
Reference: (10) p. 298.
.The temperatures ti and ft are sud -. denly changed from the initial uni form slab temperature to a new temperature. : (The case where the surface.on one side is insulated is treated by taking the case o f a slab
of twice the given thickness since the midplane has no heat flow due to symmetry.)
Temperature distribution as a func tion of time.
References: (5) p. V-12; (10) p. 265.
The temperatures it and it suddenly begin to increase as linear func-
*, tions of time. The slab is in itially at uniform temperature. (The case where one surface is
insulated against heat flow is treated as noted above.)
Temperature distribution as a func tion of time.
Reference: (10) p. 268.
The temperature at both surfaces Temperature distribution as a func
. has been varying sinusoidally for a tion of time.
. long.time. .
Reference: (10) p. 300.
Slab immersed in a fluid with
constant conductance be tween fluid and slab surface.
The temperature of.the fluid is sud
denly changed from the initial uni form slab temperature. (If one surface is insulated against heat ..flow, see above.)
Heat flow from the surface. Reference: (10) p. 303.
Temperature distribution as a func tion of time.
References: (4) pp. 32, 33, 34, 35; (5) pp. V-9, 10, 35, 42; (10) pp. 274, 284; (13) p. 106.
7T Heat flow from the surface as a func
tion of time.
"c References: (5) p. V-10; (10) p. 274; M3) p 107.
The temperature of the fluid at one surface varies as a periodic func tion of time while the temperature
of the fluid at the other surface is
constant. The conductances need do! be the same on both sides. (The variations in temperature are expressible as a Fourier series.)
Temperature distribution as a func tion of time. Reference 14.
Heat flow at the surface as a function of time.
Reference 14.