Document 4vLMyJvqaKx50wqNragBVzOVe

Uses identification Application area/main use PFAS used( chemical, commercial or technical name) Tonnage of PFAS used per year Justificatican for PFAS use (performance, requirement, special properties) Alternatives Analysis Feasibility of potential alternatives( technical, economic, regulatory impact) Waste phase(as percentages) is treated through incineration, landfilling and recycling Emissions(manufacture phase, the use phase and the end-of-life phase) filter media During further processing, Coating filter material, Evaluation currently not Depending on the total emissions may occur in the cleanability, high filtration possible. Development of application (filtrate). house due to the cutting Approximate quantity of PTFE performance ( fine filtration), At the moment, no supplier can alternative is up to the Household waste or process of the filter PTFE membrane in our filter medias food and pharmaceutical provide an alternative with supplier. The validation of the hazardous waste (thermal material (exhaust available-- 450 kg (year 2022). application, FDA and EU 1935 corresponding performance data. alternative is associated with recycling). 100% thermal > disposal of particles in conform high costs by us. utilization residual waste). At the end customer possibly due to wear (abrasion). filter media PFHxS gasket PTFE Plain bearing bushes, thrust washers, guide bands, support PTFE ring, strips, wiper... gasket FKM, FFKM, FPM gasket FEP gasket PFA Bushings, ball, sleeves, PVDF reducers, pipe, hose, elbow... Approximate quantity of PFHxS in our filter medias 6,5 kg (year 2022). For Coalescer media. Alternatives available from supplier Olephobing and Hydrophobing. but not yet validated by us. Currently <0,1% (w/w) (REACH) The validation of the alternative is associated with high costs and technical effort by us. Depending on the total application (filtrate). Household waste or hazardous waste (thermal recycling). 100% thermal utilization During further processing, emissions may occur in the house due to the cutting process of the filter material (exhaust available-> disposal of particles in residual waste). At the end customer possibly due to wear (abrasion). Approximate quantity of gaskets used in 2022. 1600 piece (different gasket size). high temperature, chemical resistance, mechanical properties of sliding At the moment, no supplier can provide an alternative with corresponding performance data. Approximate quantity of gaskets used in 2022. 94.400 piece (different size of the components). mechanical properties of sliding, high Temperature and chemical resistance, individual machining possible At the moment, no supplier can provide an alternative with corresponding performance data. Approximate quantity of gaskets used in 2022. FKM 560.000 piece, FFKM 130 piece, FPM 270 piece (differnent gasket size). high temperature, chemical resistance At the moment, no supplier can provide an alternative with corresponding performance data. Evaluation currently not possible. Development of alternative is up to the supplier. The validation of the alternative is associated with high costs by us. Depending on the total application (filtrate). Household waste or hazardous waste (thermal recycling). 100% thermal utilization Evaluation currently not possible. Development of alternative is up to the supplier. The validation of the alternative is associated with high costs by us. Household waste or hazardous waste (thermal recycling). 100% thermal utilization Evaluation currently not possible. Development of alternative is up to the supplier. The validation of the alternative is associated with high costs by us. Depending on the total application (filtrate). Household waste or hazardous waste (thermal recycling). 100% thermal utilization No emissions are expected during further processing in our company. At the end customer possibly due to wear (abrasion).. No emissions are expected during further processing in our company. At the end customer possibly due to wear (abrasion). No emissions are expected during further processing in our company. At the end customer possibly due to wear (abrasion). Approximate quantity of gaskets used in 2022. 500 piece (diefferent gasket size). high temperature, chemical resistance At the moment, no supplier can provide an alternative with corresponding performance data. Evaluation currently not possible. Development of alternative is up to the supplier. The validation of the alternative is associated with high costs by us. Depending on the total application (filtrate). Household waste or hazardous waste (thermal recycling). 100% thermal utilization No emissions are expected during further processing in our company. At the end customer possibly due to wear (abrasion). Approximate quantity of gaskets used in 2022. 10 piece (different gasket size). high temperature, chemical resistance At the moment, no supplier can provide an alternative with corresponding performance data. Evaluation currently not possible. Development of alternative is up to the supplier. The validation of the alternative is associated with high costs by us. Depending on the total application (filtrate). Household waste or hazardous waste (thermal recycling). 100% thermal utilization No emissions are expected during further processing in our company. At the end customer possibly due to wear (abrasion). Approximate quantity used in 2022. 1000 piece (different size of the components). chemical resistance, Priceperformance ratio At the moment, no supplier can provide an alternative with corresponding performance data. Evaluation currently not possible. Development of alternative is up to the supplier. The validation of the alternative is associated with high costs by us. Household waste or hazardous waste (thermal recycling). 100% thermal utilization No emissions are expected during further processing in our company. At the end customer possibly due to wear (abrasion).