Document 4vJep7X8KQaxvqrMB5pjkLxzx

1 Ethanolamines/Glycol Ethers Tier 3 Procedure Section Number: Issue Number: Original Date: Revision Date: Title: References: 639 1.3 02-07-92 Author: Dwayne Leglue 12-29-95 Procedure For Running Conductivity Glossary Of Equipment Identification (Text #114) 639. Procedure For Running Conductivity 1.0 Objective: 1.1 To run this analysis accurately, in a safe and efficient manner without damage to equipment or injury to personnel. 2.0 Responsibility: 2.1 It is the responsibility of the operations supervisor and the senior operations specialist to ensure that this procedure is fully complied with. 2.2 It is the responsibility of the senior operations specialist and the operations specialist to ensure that this procedure is executed in a safe and efficient manner. 3.0 Safety Notations: 3.1 Safety glasses are required in the lab. 4.0 Special notations: 4.1 Sample should be between 50 - 160 degrees f. 4.2 Replace both batteries if the glow lamp (visible through the small hole in the lower right corner of the meter) fails to glow when the button is pressed. 5.0 Procedure: 5.1 Rinse cell cup three times with the sample to be tested. 5.2 Fill the cell cup with the sample to be tested. 5.3 Select the range needed and push the button to read directly in micromhos. 5.4 The result will be the reading from the scale times the setting on the range selector. 6.0 Revisions: Date Printed: April 19, 1998 Paper Copies Of This Document Are Uncontrolled & Not Subject To Update. The Controlled Document Resides In File: Condproc.doc Page 1 Of 1 S9096 OONFrOETNTrAl Revision No. 1 Revision No. 2 Revision No. 3 07-20-93 12-21-94 12-29-95 Yearly Review Yearly review Yearly Review Date Printed: April 19, 1998 Page 2 Of 1 Paper Copies Of This Document Are Uncontrolled & Not Subject To Update. The Controlled Document Resides In File: Condproc.doc DO A 059097 CONFIDENTIAL