Document 4QB0Z6OwOoDbJEMEwp8qZBqDe

Specialties, Healing Klipfel Manufacturing Co. 2641-2659 West Harrison Street : Chicago, III. Manufacturers' of Automatic Valve Specialties No. 48 Vapor Thermostats.-- Automatically maintain hot water in steam heated tanks at any desired temperature between 140 and 180; but can be made special for other temperatures. A complete operating unit, within itself--it is self- contained. No compressed air, water, electrical, or other auxiliary power required. Lever of lever type is fitted with roller bearings to insure frictionless operation. The sensitive all-metal bellows will move the inner valve farther on a given temperature-pressure change than any competing bellows of the No. 48 Vapor Thermostat, Lever Type same diameter and length. Sizes: H to 8 in., inclusive. Bronze bodies in sizes 1H in. and No. 49 Vapor Thermostats.-- Similar to the No. 48 Vapor Ther under, union connections only. mostat, except that a spring is used Iron bodies in sizes 2 in. and above, flanged ends only. instead of a lever and weight. The s,p---r--i--n--0g typc e- maJy be --usVe'Jd Ww1hIeCrCe space does not permit the use of the lever type and where extreme sensitiveness and a wide range No. 43 Vapor Ther mostat, Spring Type Sizes: H to in.. in clusive.- Bronze bodies in sizes in. and under, union connec tions only. Iron bodies in sizes 2 in. and above, flanged ends only. of temperature adjustment are not required. The semi-balanced, bevel seated, bronze inner valve is normally held open by a spring. An increase of temperature of a volatile fluid hermetically sealed within the temperature sensitive bulb, which is installed in contact with the medium, causes the bellows to expand and operate the inner valve. No. 1 Pressure Regulators.--Automatically reduce any initial steam, air or water pressure to any desired reduced pres-, sure down to 2 lb. and maintain reduced pressure constantly regardless of fluctuations in initial pressure, or changes in the demand for steam. When specified for the control of air or water, the piston is provided with special leather cup packing. Can be furnished with expanded outlet in sizes 1x2 to 12x24 in., in clusive. No. I Pressure Regulator, Piston Type Sizes: % to 14 in., inclu. 8ive. Bronze bodied in sizes 1H in. and under, screwed ends only. Iron bodies in sizes 2 in, and above; 2 to 6 in., indusive, screwed or flanged ends, but screwed ends will be furnished unless otherwise spedfied; sizes 7 in, and above, flanged ends only. No. 3 Pressure Regulators.-- Automatically reduce any initial steam pressure to any desired reduced pres sure, either below atmosphere or up to 5 lb. above atmosphere, and con stantly maintain reduced pressure re gardless of initial pressure fluctuations or changes in the demand for steam. Includes no packing box, thus elimi nating leakage and friction on valve stem. Inner valves and seats are bronze, bevel seated. Can be furnished with expanded outlet in sizes 1 x 2 to 12 x 24 in., incl. 812 No. 3 Pressure Regula tor, Diaphragm Type Sizes: to 14 in., in dusive. Bronze bodies in sizes IK in. and under, screwed ends only. Iron bodies in sizes-2 in: and above; '2 to 6 in., inclusive, screwed or flanged ends, but screwed ends will be furnished unless other wise specified; sizes 7 in. and above, flanged ends only. fclipfel Manufacturing Co. > Specialties, Heating No. 33 Pressure Regu lators.--Similar to the No. 3 Pressure Regulator, except that a spring is. used instead of a lever and weight. Being equipped with a locking device, they are particularly suited for use underconditions where the adjustment of a lever and weight type might be No. S8 Noiseless Bock tampered with. ; Will re Pressure Valve No. S3 Pressure Regulator Spring Type duce any initial steam, air Sizes: 2 to 24 in., inclusive. Ail sizes or water pressure to any made with iron bodies and with flanged desired reduced. pressure ends; sizes 2 to 8 in., inclusive, also Sues: fi to 6 in,, inclusive. Bronze not exceeding 50 lb. made with screwed ends. Unless other bodies in- sizes IK in. and under, Cannot be used to main wise specified, sizes 6.in. and under will screwed ends only. Iron bodies in sizes 2 in. and above; sizes 2 to 6 in., inclusive, are made with screwed or tain pressures below at mosphere. Expanded out- be shipped screwed ends; sizes 8 in. and above with flanged ends. flanged ends, but screwed ends will be furnished unless otherwise-specified. let'can be furnished. No. 28 Noiseless Back Pressure Valves.--Automatically and noiselessly maintain any desired back pressure on exhausts of non-condensing engines. Because of the patented construction, inner valve is effectively stabilized and can not pulsate in unison with the stroke of the engine. Operated in either horizontal or vertical position. Pre ferable installation is in horizontal pipe line. Iron bodies, bronze inner valves and trimmings. No. 27 Balanced Float. Valvfes.--Automatically control the supply of cold water to open tanks, so as to maintain a practically constant water level. The inner valve consists of two perfectly balanced bronze plunger discs, and is unaffected by the water pressure. Can be furnished with bevel seated valves at an extra price. Angle and globe patterns; with seamless cop per float, for working pressures up to 200 lb. Swivel guide yoke can be turned to any position.,, ^ No. 27 Balanced Float Valve Sizes: to 20 in., inclusive. Bronzy bodies in sizes IK in. and under, screwed ends only. Iron bodies in sizes 2 in. and above; 2 to 6 in., inclusive, screwed or flanged ends, but screwed ends will be shipped unless spedfied otherwise; sizes 7 in. and above, flanged ends, only. AH sizes J4 in. and under made angle or globe patterns, but angle pattern will be shipped unless specified globe. Sizes 16 in. and above made globe patterns, only. No: 7 Single Seated Float Valves.--Automatically maintain a constant level of hot or cold water in open tanks. Single seated, auxili ary operated. Seat equal to pipe size. Swivel guide yoke allows the float to be turned to any position. Includes a packing box with gland to prevent leakage past the valve stem. Angle and globe patterns, with seamless copper float, for working pressures up to 2001b. 813 No. 7 Single SeatedFloat Valve Sizes: % to 12 in., inclusive. Bronze bodies in sizes IK in, and under, screwed ends only. Iron bodies in sizes 2 in. and above; 2 to 6 in., inclusive, screwed or flanged ends, but screwed ends will be ...shipped unless specified otherwise; size 8 in., flanged ends only. Sizes 8 in. and under made angle or globe patterns, but angle pat-, tern will be shipped unlessspedfied globe. Sizes 10 and12 in. made to order, flanged ends, globe pattern only.