ARKEM A
Phone; Fax: Asst.: Email:
[ Ex. 6 610-205-7096 610-205-7070
Product Safety & Regulatory Affairs Health, Environment & Safety
June 15, 2017
JCLiJmh.Se.mAEliwcnaovloirdConomnteronltaDl ivPirsoiotenc(ti7o4n0A5Mge)ncy 1200 Pennsylvania Ave., NW Washington, DC 20460-0001
Docket ID#: EPA-HQ-OPPT-2010-0572
Re: Arkema Inc. Comments to Draft Guidance for Reporting of Chemical Substances When Manufactured or Processed as Nanoscale Materials; Notice of Availability and Request for Comment
Dear Mr. Alwood:
AInrck.e(minacluisdaingdivseurbssifiideidargielosbaanl dchaeffmiliaictaelss) mopaenruafatecstu3re4rf.aIcnilitthieesUinnit1e9dsStatatetes,s,inAcrlkuedminga two research and development centers. Arkema Inc. employs approximately 3400 people in the United States. Arkema appreciates the opportunity to provide Comments to Draft Guidance for Reporting of Chemical Substances When Manufactured or Processed as Nanoscale Materials.
Aparkinetms aanmdacnouaftaincgtusr.esTheemsuelseiomnuplsoiolynmpeorslymtheartsaarereucsheadinins tohfereparocdteudctmiononoofmlaetresxthat
form liquid polymers trapped within a surfactant (water) micelle. The liquid polymers
only retain their integrity as long as the surfactant is acting as a physical and
electrostatic barrier. Once that barrier collapses (if the water is removed), coagulation
occurs. If you ultimately flow
remove the water into each other to
pfohramsea,
the emulsion polymers cohesive film. They do
deform, collapse and not remain discrete
polymers when dry.
Arkema requests that EPA address the following questions in its guidance:
Question: Does EPA consider the following chemical substance a solid at 25C: an emulsion polymer that consists of a chain of reacted monomers that form liquid polymers trapped within a surfactant micelle where the polymer only retains its integrity as long as the surfactant acts as a physical and/or electrostatic barrier?
Discussion: Arkema manufactures emulsion polymers that are used in the production omfolantoemxeprasinthtsatafnodrmcolaiqtuinidgsp.oTlyhmeesres etrmapuplseiodnwpitohliynmaerssurafraectcahnatin(wsaotef rr)eamcitceedlle. The liquid polymers only retain their
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema Inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00001
United States Environmental Protection Agency Mr. Jim Alwood JPuangee 125, 2017
Orinentmecgoervittehyatahtseblawornargiteerarcspohtlhlaaespess,uetrshfae(cifetatmhneut lwissiaoatncetripniosglyramesmearosvpedhdey)fs,oicrcmaola,agcnuodllalaetipolesncetoraocnscdtuarutsilc.timbIfaayrtroeieulyr.flow into each other to form a cohesive film. They do not remain discrete polymers when dry. ipPCnrlheoweachmseiec.s,hsnVeoloiqstle.ui8intdh3,addtirNsotohpp.eele1rpt2ssu,ebadplrpiecs.ay2dtsii2ost2epn9em"-r2Tsse2e(d5rIUm9inPi(nA2ao0Cll1ioq1Rgu)iyeddc;oe"offaimnpnemdosleyaamnnndeeeamrmtsiuoualnslnssioidon2np0poa1ols1yly)ma"m,"eePFrriulzuaraiesdtiaAosnpynpstl.em "Emulsion in which the dispersed phase is a liquid polymer or a polymer solution." (See attached). Therefore, Arkema does not believe that such emulsion polymers constitute a solid at 25C. AProklleumtioanaPprperveecniattioens tahnedoTpopxoicrtsun(OityPPtoTp)rroevgidaerdwinrgittEenPAco'smDmraefnt tGs utoidtahneceOfffoicreRoefporting of Chemical Substances When Manufactured or Processed as Nanoscale Materials these substances. If you wish to discuss the issues raised in this letter in greater detail, please do not hesitate to contact me. Sincerely,
SRPereonbdieoucrcctDaSirJae.fceBtoteyrrn&sRteeingulatory Affairs RJB:mm cc: Nancy Beck
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema Inc. 90D First Avenue King of Prussia. PA 1946
ED 002061 00043383-00002
Pure Appi. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011.
doi: 10.1351/PAC-REC-10-06-03 2011 IUPAC, Publication date (Web): 10 September 2011
Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011)*
Stanislaw Slomkowski1# Jos V. Alemn2, Robert G. Gilbert3, Michael Hess4, Kazuyuki Horie5, Richard G. Jones6, Przemyslaw Kubisa1, Ingrid Meisel7, Werner Mormann4, Stanislaw Penczek1, and Robert F.T. Stepto8
1Center of Molecular and Macromolecular Studies, Polish Academy of Sciences, Sienkiewicza 112, 90-363 Lodz, Poland; departamento de Qumica, Campus Universitario de Tarifa, Las Palmas de Gran Canaria. E-35017, Spain;3Department of Natural Resources, Agriculture, and Veterinary Science, University of Queensland, Hartley Teakle Building, Brisbane, QLD 4072, Australia; 4Department of Macromolecular Chemistry, University of Siegen, Adolf-Reichwein-Str. 2, Siegen D-57068, Germany; s6-11-21, Kozukayama, Tarumi-ku, Kobe 655-0002, Japan; 6School of Physical Sciences, University of Kent, Canterbury, Kent CT2 7NH, UK; 7Wiley-VCH Verlag GmbH, Macromolecular Chemistry and Physics, Editorial Office, P.O. Box 10 11 61, Weinheim D-69451, Germany; 8Manchester Materials Science Centre, University of Manchester, Grosvenor Street, Manchester M1 7HS, UK
Abstract: A large group of industrially important polymerization processes is carried out in dispersed systems. These processes differ with respect to their physical nature, mechanism of particle formation, particle morphology, size, charge, types of interparticle interactions, and many other aspects. Polymer dispersions, and polymers derived from polymerization in dispersed systems, are used in diverse areas such as paints, adhesives, microelectronics, med icine, cosmetics, biotechnology, and others. Frequently, the same names are used for differ ent processes and products or different names are used for the same processes and products. The document contains a list of recommended terms and definitions necessary for the unam biguous description of processes, products, parameters, and characteristic features relevant to polymers in dispersed systems.
Keywords: dispersed systems; glossary; IUPAC Polymer Division; polymer terminology; polymerization processes; terminology.
CONTENTS
1. INTRODUCTION 2. POLYMER PARTICLES 3. PARTICLE DIAMETERS, AVERAGE PARTICLE DIAMETERS, AND
PARTICLE-DIAMETER DISPERSITY
*Sponsoring body: IUPAC Polymer Division: see more details on p. 2254. tCorresponding author: E-mail: staslomk@biibo.cbmm.lodz.pl
2229
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema Inc. 900 First Avenue King of Prussia, PA 19408
ED 002061 00043383-00003
2230
S. SLOMKOWSKI
4. PARTICLE MORPHOLOGY 5. COLLOIDAL AND RELATED SYSTEMS 6. POLYMERIZATION PROCESSES 7. TERMS RELATED TO POLYMERIZATION PROCESSES 8. AGGREGATION AND RELATED PROCESSES 9. MEMBERSHIP OF SPONSORING BODY 10. REFERENCES APPENDIX A: ALPHABETICAL LIST OF TERMS AND GROUPS OF TERMS APPENDIX B: LIST OF RECOMMENDED SYMBOLS AND ABBREVIATIONS
1. INTRODUCTION
A large group of industrially important polymerization processes is carried out in dispersed systems. These processes differ with respect to their physical nature, mechanism of particle formation, particle morphology, size, charge, types of interparticle interactions, and many other aspects. Polymer disper sions, and polymers derived from polymerization in disperse systems, are used in diverse areas such as paints, adhesives, microelectronics, medicine, cosmetics, biotechnology, and others. Frequently, the same names are used for different processes and products or different names are used for the same processes and products. The present list of recommended terms and definitions is necessary for the unambiguous description of processes, products, parameters, and characteristic features relevant to polymers in dispersed systems.
For ease of reference, the terms in each section, subsection, etc. are listed alphabetically and num bered sequentially. Cross-references to terms defined elsewhere in the document are denoted in italic typeface. If there are two terms in an entry on successive lines, the second is a synonym.
2. POLYMER PARTICLES
2.1
polymer particle
Particle of polymer of any shape.
Note: For the description of a particle, the expression "size" is often used. However, because this expression does not have a sufficiently precise meaning its usage is not recom mended.
2.2
polymer bead
Sphere of polymer, usually with a diameter in the range from one-tenth to a few millimeters.
2.3
polymer microparticle
Particle of polymer of any shape with an equivalent diameter from approximately 0.1 to 100 pm.
2.3.1 polymer microsphere Polymer microparticle of spherical shape.
2.3.2 polymer microcapsule See microcapsule.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vo!. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. S00 First Avenue King of Prussia, PA 13408
ED 002061 00043383-00004
Terminology of Polymers
2231
2.4
polymer nanoparticle
Particle of polymer of any shape and an equivalent diameter from approximately 1 to 100 nm.
2.4.1 polymer nanosphere Polymer nanoparticle of spherical shape.
2.4.2 polymer nanocapsule See nanocapsule.
2.5
polymer gel particle
Particle of gel in which the network component is a polymer.
2.5.1
gel microparticle microgel
Particle of gel of any shape with an equivalent diameter of approximately 0.1 to 100 pm.
Note: Definition based on ref. [1],
2.5.2
gel nanoparticle nanogel
Particle of gel particle of any shape and an equivalent diameter of approximately 1 to 100 nm.
2.5.3 microgel See gel microparticle.
2.5.4 nanogel See gel nanoparticle.
2.6
polymer network particle
Particle having any shape and composed of a polymer network and possibly species of finite molar mass.
2.7
latex
Colloidal dispersion of polymer particles in a liquid.
Note: The polymer in the particles may be organic or inorganic.
2.7.1 artificial latex
Latex obtained by emulsification of a polymer or oligomer solution in a liquid or by emulsification of a liquid polymer or liquid oligomer in a liquid.
2011, IUPAC
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema inc. 908 First Avenue King of Prussia, PA 1946
ED 002061 00043383-00005
2232
S. SLOMKOWSKI
2.7.2 hybrid latex
a. Latex comprising a polymer of relatively high molar mass and an oligomer or an alkyd resin, in which there is usually chemical bonding between the two components, formed either during latex synthesis or subsequently after formation of a film from the latex.
b. Latex comprising multicomponent particles that contain both organic and inorganic material phases.
2.7.3 inverse latex
Nonaqueous latex in which the dispersed phase comprises hydrophilic polymer usually swollen with water.
Note: An inverse latex is usually formed by inverse emulsion, inverse micro-emulsion, or inverse mini-emulsion polymerizations in which water-soluble monomer(s) dissolved in the dispersed phase is (are) polymerized.
2.7.4 latex particle Polymer particle that is present in a latex.
2.7.5 natural latex Latex, tire dispersed phase of which is obtained from various plants.
Note 1: The dispersed phase is often polyisoprene (2-methyl-1,3-butadiene). An example is latex from the rubber tree, Hevea brasiliensis.
Note 2: Many plants when wounded produce a milky, sticky sap that is referred to as a latex.
2.7.6 synthetic latex
Latex obtained as a product of an emulsion, mini-emulsion, micro-emulsion, or dispersion polymeriza tion.
3. PARTICLE DIAMETERS, AVERAGE PARTICLE DIAMETERS, AND PARTICLE-DIAMETER DISPERSITY
3.1
equivalent particle diameter, SI unit: run
Diameter of a hypothetical spherical particle of the same composition that, using a given particle-size determination method, would give the same diameter as a substance composed of spherical or non spherical particles at the same concentration.
Note: Although the equivalent particle diameter is not a precisely defined quantity, as its value depends on the experimental method used for its determination, it is useful for particle characterization.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appi. Chem., Vo!. 83, No. 12, pp. 2229-2259, 2011
Arkema inc: 300 First Avenue King of Prussia, PA 19406
Tiers 8&9
ED 002061 00043383-00006
Terminology of Polymers
2233
3.2
average particle diameters and particle-diameter dispersity
Diameter
Symbols and formulae
3.2.1
number-average particle diameter
3.2.2 surface-average particle diameter
3.2.3 mass-average particle diameter 3.2.4 z-average particle diameter 3.2.5 volume-average particle diameter
3.2.6 particle-diameter dispersity
W iW i
Note 1: In the formulae, Ni denotes the number of particles of diameter d{.
Note 2: Averages may be denoted by < ) or by " .
Note 3: In principle, any method suitable for measuring the diameters of single particles (e.g,, electron microscopy) could be used for the determination of all the averages given in the table. However, some experimental methods allow determination only of particular diameter averages.
Note 4: Average diameters are defined and calculated by using relations or ratios between the main momentums of a representative statistical distribution that is the particle diameter distribution (e.g., z-average diameter is the fifth momentum over the fourth one).
Note 5: The definition of mass-average diameter is meaningful only for latexes where the par ticles all have the same density.
Note 6: The definition of the z-average diameter is meaningful only for latexes where the parti cles all have the same density and refractive index
Note 7: The term "particle-diameter dispersity" and the symbol >d are an extension of the terms molarynass dispersity (>M) and degree-of-polymerization dispersity (>x), where >m::= MmJM,,n and f)vX = XmJX,,n L[21j .
Note 8: For "particle-diameter dispersity", the term "diameter-polydispersity index" is not rec ommended as "polydispersity" is an undefined quantity. The term "non-uniformity fac tor" is also not recommended.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Voi. 83, No. 12, pp. 2229-2259, 2011 Affc-tea inc. 900 First Avenue King of Prussia, PA 19406
Tiers 8&9
ED 002061 00043383-00007
2234
S. SLOMKOWSKI
4. PARTICLE MORPHOLOGY
4.1
composite particle
See multicomponent particle.
4.2
homogeneous particle
Particle that is spatially uniform with respect to chemical composition of the constituent polymer(s).
Note: A particle that is chemically homogeneous but has a radial distribution function of com position that is not step-like is not a homogeneous particle. Similarly, a block-copoly mer micelle is not a homogeneous particle, although all constituent copolymer mole cules can have identical compositions.
4.3
multicomponent particle
structured particle
composite particle
Inhomogeneous particle consisting of two or more immiscible components.
Note 1: The components can be solid, liquid, or gaseous.
Note 2: Multicomponent particles are often obtained by sequential polymerizations of different monomers or monomer mixtures.
4.3.1 core-shell particle
Polymer particle comprising at least two phase domains, one of which (the core) lies within the other(s) that form the polymeric outer layer(s) (the shell(s)).
Note 1: Examples of core-shell particles are shown in Fig. 1. A core may be composed of one single-phase domain of one type of polymer or copolymer block in a shell of a differ ent type of polymer (or copolymer block).
Note 2: Core-shell particles may be obtained by seeded emulsion polymerization in which the seed particles form the cores of the new particles, and polymer produced in the second stage and subsequent stages, if any, forms the shell.
Note 3: Core-shell particles in which polymer synthesized in the second stage is located within one single domain, and the particles and polymer constituting the initial seed are located in the shell are usually called inverted core-shell particles.
4.3.1.1 microcapsule
Core-shell particle with an equivalent particle diameter in the approximate range 0.1 to 100 pm, wherein the core is a fluid (liquid or gas) or a solid that may subsequently be released.
4.3.1.2 nanocapsule
Core-shell particle with an equivalent particle diameter in the approximate range from 1 to 100 nm, wherein the core is a fluid (liquid or gas) or a solid that may subsequently be released.
2011, lUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema Inc. 900 First Avenus King of Prussia. PA 19406
ED 002061 00043383-00008
Terminology of Polymers
2235
4,3.2 inverted core-shell particle Core-shell particle in which polymer synthesized in the second stage is located in the core of the parti cle and polymer constituting the initial seed is located in the shell.
Note: See Fig. 1.
4.3.3 multilayered particle Multicomponent particle made o f at least two different polymers, with an inner core o f one polymer and with at least two layers of different polymers.
Note: See Fig. 1.
4.3.4 occluded particle Multicomponent particle in which one polymer forms more than one phase domain within a matrix of another polymer.
Note 1: See Fig. 1. Note 2: The number and size of the domains can vary, and their spatial distribution within the
particles is often not uniform.
Note 3: This type of particle is also referred to as having microdomain morphology.
4.3.5 partially engulfed particle
Multicomponent particle in which one or more polymer(s) cover(s) most, but not all, of the particle sur face.
Note 1: See Fig. 1.
Note 2: The degree of coverage may vary when neither polymer is preferentially covering the other one. The morphology is commonly referred to as a hemisphere.
Polymer in seed particle (7.9.)
o Polymer formed during seeded polymerization (6.1.9.)
Core-shell particles (4.3.1.)
Inverted core shell particle
(4.3.2.)
Multilayered particle
(4.3.3.)
Fig. 1 Examples of two-phase particle morphology.
Occluded particle (4.3.4.)
Partially engulfed particles (4.3.5.)
2011, IUPAC Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00009
2236
S. SLOMKOWSKI
4.4
raacroporous particle
Particle containing pores of diameters exceeding about 50 mn.
Note: For definition of macropores, see ref. [3].
4.5
mesoporous particle
Particle containing pores of diameters between approximately 2 and 50 nm.
Note: For definition of mesopores, see ref. [3].
4.6
microporous particle
Particle containing pores of diameters not exceeding 2 nm.
Note: For definition of micropores, see ref. [3].
4.7
structured particle
See multicomponent particle.
5. COLLOIDAL AND RELATED SYSTEMS
5.1
dispersed phase
Phase constituted of particles of any size and of any nature dispersed in a continuous phase of a differ ent composition.
5.2
continuous phase
Phase not interrupted in space
Note: The continuous phase may be gaseous, liquid, or solid.
5.3
dispersion medium
Matrix for the dispersed phase
Note 1: The dispersion medium is the continuous phase of the dispersion.
Note 2: If the continuous phase is a gas, the dispersion is called an aerosol [1],
5.4
dispersion
Material comprising more than one phase where at least one of the phases consists of finely divided phase domains, often in the colloidal size range, dispersed throughout a continuous phase.
Note 1: Modification of definition in ref [1],
5.4,1 nonaqueous dispersion Dispersion in which the continuous phase is nonaqueous.
2011, IUPAC Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00010
Terminology of Polymers
2237
5.4.2 polymer dispersion Dispersion in which the dispersed phase consists of a polymer.
5.5
colloid
Short synonym for colloidal system.
Note: Quotation from refs. [1,4],
5.5.1 colloidal
State of subdivision such that the molecules or polymolecular particles dispersed in a medium have at least one dimension between approximately 1 nm and 1 pm, or that in a system discontinuities are found at distances of that order.
Note: Quotation from refs. [1,4],
5.5.2 colloid stabilizer Compound increasing stability of a colloid.
Note: A colloid stabilizer may be added to a colloid or synthesized during colloid preparation.
5.6
polymer colloid
Colloidal dispersion in which at least one of the phases is a polymer, either organic, or inorganic or some combination of the two.
Note 1: For the definition of colloidal dispersion, see ref. [4].
Note 2: The term "polymer colloid" is more general than latex. In a latex the dispersed phase is always a polymer, whereas in a polymer colloid this need not be so.
Note 3: Particles of a liquid or a gas dispersed in a polymer, particles comprising "empty" shells made of polymers, and aerosols of polymer particles are all known examples.
5.7
suspension
Dispersion of solid particles in a liquid.
Note: Definition based on that in ref. [4],
5.7.1 colloidal suspension System in which particles of colloidal size of any nature (e.g,, solid, liquid, or gas) are dispersed in a continuous phase of a different composition (or state) [1,4].
Note: The definition is based on refs. [1,4].
5.8
emulsion
Fluid system in which liquid droplets are dispersed in a liquid.
Note 1: The definition is based on the definition in ref. [4],
2011, IUPAC
Pure Appl. Chem., Voi. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
ArKems inc. 900 First Avenu King of Prussia. PA 19406
ED 002061 00043383-00011
2238
S. SLOMKOWSKI
Note 2: The droplets may be amorphous, liquid-crystalline, or any mixture thereof.
Note 3: The diameters of the droplets constituting the dispersed phase usually range from approximately 10 nni to 100 pm, i.e., the droplets may exceed the usual size limits for colloidal particles.
Note 4: An emulsion is termed an oil/water (o/w) emulsion if the dispersed phase is an organic material and the continuous phase is water or an aqueous solution and is termed water/oil (w/o) if the dispersed phase is water or an aqueous solution and the continu ous phase is an organic liquid (an "oil").
Note 5: A w/o emulsion is sometimes called an inverse emulsion. The term "inverse emulsion" is misleading, suggesting incorrectly that the emulsion has properties that are the oppo site of those of an emulsion. Its use is therefore not recommended.
5.8.1 polymer emulsion
Emulsion in which the dispersed phase is a liquid polymer or a polymer solution.
Note: The dispersing phase may be a low-molecular-weight liquid or a solution of another polymer.
5.8.2 macro-emulsion
Emulsion in which the particles of the dispersedphase have diameters from approximately 1 to 100 urn.
Note 1: Macro-emulsions comprise large droplets and thus are "unstable" in the sense that the droplets sediment or float, depending on the densities of the dispersed phase and dis persion medium. Separation of the dispersed and continuous phases usually occurs within time periods from a few seconds to a few hours, depending upon the viscosity of the fluid medium and the size and density of the droplets.
Note 2: Macro-emulsions usually contain low-molecular-weight or polymeric surfactants that decrease the rates of coalescence of dispersed droplets. Droplets of the dispersed phase may be also stabilized by adsorption of solid particles onto their surface (so-called Pickering stabilization).
5.8.3 mini-emulsion
Emulsion in which the particles of the dispersedphase have diameters in the range from approximately 50 ran to 1 pm.
Note 1: Mini-emulsions are usually stabilized against diffusion degradation (Ostwald ripening [1]) by a compound insoluble in the continuous phase.
Note 2: The dispersed phase contains mixed stabilizers, e.g., an ionic surfactant, such as sodium dodecyl sulfate (n-dodecyl sulfate sodium) and a short aliphatic chain alcohol ("co-sur factant") for colloidal stability, or a water-insoluble compound, such as a hydrocarbon ("co-stabilizer" frequently and improperly called a "co-surfactant") limiting diffusion degradation. Mini-emulsions are usually stable for at least several days.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No, 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema Inc. S00 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00012
Terminology of Polymers
2239
5,8.4 micro-emulsion
Dispersion made of water, oil, and surfactant(s) that is an isotropic and thermodynamically stable sys tem with dispersed domain diameter varying approximately from 1 to 100 nm, usually 10 to 50 nm.
Note T. In a micro-emulsion the domains of the dispersed phase are either globular or intercon nected (to give a bicontinuous micro-emulsion).
Note 2: The average diameter of droplets in macro-emulsion (usually referred to as an "emul sion") is close to one millimeter (i.e., IQ"3 m). Therefore, since micro- means 10"6 and emulsion implies that droplets of the dispersed phase have diameters close to 10"3 m, the micro-emulsion denotes a system with the size range of the dispersed phase in the HI 6 x ]()'5rn 10 9 m range.
Note 3: The term "micro-emulsion" has come to take on special meaning. Entities of the dis persed phase are usually stabilized by surfactant and/or surfactant-cosurfactant (e.g,, aliphatic alcohol) systems.
Note 4: The term "oil" refers to any water-insoluble liquid.
5.9
gel
Nonfluid colloidal network or polymer network that is expanded throughout its whole volume by a fluid
[1]-
'
Note l: A gel has a finite, usually rather small, yield stress.
Note 2: A gel can contain:
(i)
a covalent polymer network, e.g., a network formed by crosslinking polymer
chains or by nonlinear polymerization;
(ii) a polymer network formed through the physical aggregation of polymer chains, caused by hydrogen bonds, crystallization, helix formation, complexa- tion, etc., that results in regions of local order acting as the network junction points. The resulting swollen network may be termed a "thermoreversible gel" if the regions of local order are thermally reversible;
(iii) a polymer network formed through glassy junction points, e.g., one based on block copolymers. If the junction points are thermally reversible glassy domains, the resulting swollen network may also be termed a thermoreversible gel:
(iv) lamellar structures including mesophases {[3] defines lamellar crystal and mesophase}, e.g., soap gels, phospholipids, and clays:
(v) particulate disordered structures, e.g., a flocculent precipitate usually consist ing of particles with large geometrical anisotropy, such as in V2Os gels and globular or fibrillar protein gels.
Note 3: Corrected from [4], where the definition, is via the property identified in Note 1 (above) rather than of the structural characteristics that describe a gel.
5.9.1 polymer gel Gel in which the network component is a polymer network.
2011, IUPAC
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00013
2240
S. SLOMKOWSKI
Note: Definition quoted from ref, 1,4,
5.9.1.1 hydrogel Gel in which the swelling agent is water.
Note 1: The network component of a hydrogel is usually a polymer network. Note 2: A hydrogel in which the network component is a colloidal network may he referred to
as an aquagel. Note 3: Definition quoted from refs. [1,4],
5.9.1.2 aerogel
Gel comprised of a microporous solid in which the dispersed phase is a gas [1],
Note 1: Microporous silica, microporous glass, and zeolites are common examples of aerogels.
Note 2: Corrected from ref, [4], where the definition is a repetition of the incorrect definition of a gel (see Note 3 of 5.9) followed by an inexplicit reference to the porosity of the struc ture.
5.10
micelle
Particle of colloidal dimensions that exists in equilibrium with the molecules or ions in solution from which it is formed.
Note: Based on definition in ref. [4],
5.10.1 hemi-micelle Type of micelle that exists in relatively small numbers below the critical micelle concentration.
5.10.2 ad-micelle
Surfactant bilayer formed on a charged adsorbing surface.
Note 1: Ad-micelles are usually formed on inorganic particles.
Note 2: In the case of particles with charged surfaces the surfactant molecules are oriented with their charged head-groups toward the particle surfaces. In the case of further addition of surfactant, a surface bilayer may form, which is termed an ad-micelle (adsorbed micelle).
5.10.3
micellar aggregation number micellar degree of association
Number of molecules constituting a micelle.
5.10.4 micellar charge Combined charge of the surfactant ions and counterions tightly bound to a micelle.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkems Inc, 900 First Avenue King of Prussia, PA 19408
ED 002061 00043383-00014
Terminology of Polymers
2241
Note 1: Micelle with tightly bound ions behaves as a unit carrying the net charge,
5.10.5 micellar degree of association See micellar aggregation number.
5.10.6 micellar molecular weight See micellar relative molar mass.
5.10.6 micellar relative molar mass micellar molecular weight
Mass of a mole of micelles divided by the molar mass constant. The relative molar mass of micelles (mic) is thus Mr mjc - Mmjc/Mu.
Note I: 1/12 of the molar mass of !2C is termed "molar mass constant" with symbol Mu = A/(12C)/12 = Na mu and unit g m o l 1where mu is the "atomic mass constant" with unit u or Da, and NA is the Avogadro constant.
Note 2: The micellar relative molar mass refers to a neutral micelle and thus includes the mass of counterions that compensate the charge of surfactant molecules in micelles.
5.11
vesicle
Closed structure formed by amphiphilic molecules that contains solvent (usually water).
5.12
particle number concentration, C , accepted for use with SI unit: I,"1
Number of particles per volumeof suspending medium.
5.13
solids content of apolymerdispersion
Mass fraction of nonvolatile material in a polymer dispersion.
5.13.1 polymer content Mass fraction of polymer in a polymer dispersion.
5.14
dispersed-phase (amount) concentration, [A] for species A, [M]p for monomer,
accepted for use with SI unit: mol L"1
particle-phase (amount) concentration
Amount concentration of a species within the dispersed phase.
Note: If the dispersed phase depends on quantities such as radius, r, time, t, etc., the recom
mended symbols are [A] (r,t,...) and [M]p(r,f,...).
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema Inc. 900 Flrs Avenus King of Prussia, PA 1S406
ED 002061 00043383-00015
2242
S. SLOMKOWSKI
5.15
continuous-phase (amount) concentration, [A]cont for species A, [M]cont for monomer,
accepted for use with SI unit: mol L~*
Concentration of species within the continuous phase of a dispersion.
Note 1: If the continuous phase is water, the symbols [A]w and [M]w are usually used.
Note 2: If the continuous-phase concentration depends on quantities such as time t, etc., the rec ommended symbols are [A]cont(i,...) and [M]contiC--)-
5.16
particle-phase concentration
See dispersed-phase concentration.
5.17
polymer mass fraction, vvp
Mass fraction of polymer within the dispersed phase,
6. POLYMERIZATION PROCESSES
6.1
emulsion polymerization
Polymerization whereby monomer(s), initiator, dispersion medium, and possibly colloid stabilizer con stitute initially an inhomogeneous system resulting in particles of colloidal dimensions containing the formed polymer.
Note: With the exception of mini-emulsion polymerization, the term "emulsion polymeriza tion" does not mean that polymerization occurs in the droplets of a monomer emulsion.
6.1.1 ab initio emulsion polymerization Emulsion polymerization in which no seed particles are added.
6.1.2 batch emulsion polymerization Emulsion polymerization in which all the ingredients are placed in a reactor prior to reaction.
6.1.3 continuous emulsion polymerization
Emulsion polymerization in which all the ingredients are added continuously and the product latex is removed continuously.
6.1.4 emulsifier-free emulsion polymerization
Emulsion polymerization carried out without the addition of a colloid stabilizer.
Note 1: In an emulsifier-free emulsion polymerization, a colloid stabilizer is produced in situ (e.g., the polymerization of styrene initiated with potassium persulfate yields macro molecules with anionic end groups providing ionic stabilization of the colloidal poly styrene particles).
Note 2: Other names, such as emulsifier-less, soap-less, soap-free, surfactant-less, and surfac tant-free emulsion polymerization, that are sometimes used, are not recommended.
2011, IUPAC
Pure Appl. Chem., Vo!. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00016
Terminology of Polymers
2243
6.1.5 encapsulating emulsion polymerization
Emulsion polymerization leading to the encapsulation of a solid within polymer particles or liquid poly mer droplets.
Note: An encapsulating emulsion polymerization is often performed inside ad-micelles.
6.1.6 inverse emulsion polymerization
Emulsion polymerization in a nonaqueous medium in which the dispersed phase is usually an aqueous solution, initially of monomer(s), and finally of polymer.
6.1.7 monomer-flooded emulsion polymerization
Semi-continuous emulsion polymerization in which the monomer(s) is(are) fed to the reactor at a rate that exceeds the rate of polymerization.
Note: A monomer-flooded emulsion polymerization refers to a state where the monomer con centration in the polymer particles is at or greater than its equilibrium swelling value and therefore droplets may be formed.
6.1.8 monomer-starved emulsion polymerization
Semi-continuous emulsion polymerization in which the polymerization rate is controlled by the feed rate(s) of monomer(s), in such a way that, for most of the process, the polymerization rate equals the monomer(s) feed rate(s).
Note: Usually a monomer-starved emulsion polymerization refers to a state where the monomer concentration in the polymer particles is less than its equilibrium swelling value.
6.1.9 power-feed emulsion polymerization
Semi-continuous emulsion copolymerization in which the instantaneous composition of the formed copolymer is the same as that of the added monomer mixture(s).
Note: A power-feed emulsion polymerization is normally achieved by feeding to the reactor monomer mixture(s) from one or more reservoirs under monomer-starved conditions. In the simplest case, reservoirs I and II are initially filled with monomers A and B, respectively. During polymerization the contents of reservoir I are continuously pumped into the reactor and the contents of reservoir II are continuously pumped into reservoir I at definite rates.
6.1.10 seeded emulsion polymerization
Emulsion polymerization with seed particles (see definition 6.9) are formed in situ or added initially to the polymerizing mixture.
Note: Under certain conditions the seed particles capture enough radical species from the aqueous phase so that no new particles are formed. In such polymerization, the number of growing particles is equal to the number of seed particles.
2011, IUPAC
Pure Appi. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema inc. 900 Firrst Avenue King of Prussia, PA 19406
ED 002061 00043383-00017
2244
S. SLOMKOWSKI
6.1.11
semi-continuous emulsion polymerization semi-batch emulsion polymerization
Emulsion polymerization in which some of the ingredients are initially placed in a reactor and the remaining ingredients are added during the polymerization.
6.1.12 vesicle polymerization
Polymerization inside the bilayer of a vesicle leading to formation of polymer inside the bilayer.
Note 1: The bilayer may contain polymerizable and non-polymerizable molecules.
Note 2: Usually phase separation occurs leading to entities with inhomogeneously distributed polymer (e.g., entities that contain a latex particle inside the vesicle's bilayer).
Note 3: The morphology of such entities is called "parachute" morphology, owing to similarity of their shape to the shape of parachute canopy.
Note 4: In the case of reactive copolymerizing surfactants (i.e., surfmers; see definition 7.11.1) hollow spherical entities can sometimes be obtained with a homogeneous distribution of polymer in the bilayer.
6.2
micro-emulsion polymerization
Emulsion polymerization in which the starting system is a micro-emulsion and the final latex comprises colloidal particles of polymer dispersed in an aqueous medium.
Note: Diameters of polymer particles formed in the micro-emulsion polymerization usually are between 10 and 50 nm.
6.2.1 inverse micro-emulsion polymerization
Emulsion polymerization in which the starting system is a micro-emulsion and the final system is com posed of an organic continuous phase with an aqueous polymer solution as the dispersed phase.
6.3
micellar polymerization
Polymerization of a polymerizable surfactant in solution above its critical micelle concentration.
Note: The initial micellar structure usually is not preserved during the polymerization.
6.4
mini-emulsion polymerization
Polymerization of a mini-emulsion of monomer in which all of the polymerization occurs within pre existing monomer particles without the formation of new particles.
6.4.1 inverse inini-emulsion polymerization
Emulsion polymerization in which the starting system is a mini-emulsion and the final system is com posed of an organic continuous phase with an aqueous polymer solution as the dispersedphase.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Arkema inc, 900 Firsl Avenue King of Prussia, PA 19406
Tiers 8&9
ED 002061 00043383-00018
Terminology of Polymers
2245
6.5
precipitation polymerization
Polymerization, in which monomer(s), initiator(s) and colloid stabilizer(s) are dissolved in a solvent and this continuous phase that is a nonsolvent for the formed polymer beyond a critical molecular weight.
6.5.1 dispersion polymerization
Precipitation polymerization in which monomer(s), initiator(s), and colloid stabilizer(s) are dissolved in a solvent forming initially a homogeneous system that produces polymer and results in the formation of polymer particles.
Note: The process usually results in polymer particles of colloidal dimensions.
6.5.1.1 seeded dispersion polymerization
Dispersion polymerization in which seed particles are formed in situ or added prior to initiation of the polymerization.
6.5.2 precipitation polycondensation Precipitation polymerization proceeding by polycondensation.
Note: See ref. [1] for the definition of polycondensation.
6.5.2.1 dispersion polycondensation Dispersion polymerization proceeded by polycondensation.
Note: See ref. [1] for the definition of polycondensation.
6.5.3 precipitation polyaddition Precipitation polymerization proceeding by polyaddition.
Note: See ref. [1] for the definition of polyaddition.
6.5.3.1 dispersion polyaddition Dispersion polymerization proceeding by polyaddition.
Note: See ref. [1] for the definition of polyaddition.
6.6
suspension polymerization
Polymerization in which polymer is formed in monomer, or monomer-solvent droplets in a continuous phase that is a nonsolvent for both the monomer and the formed polymer.
Note 1: In suspension polymerization, the initiator is located mainly in the monomer phase.
Note 2: Monomer or monomer-solvent droplets in suspension polymerization have diameters usually exceeding 10 pm.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. S00 Firs!: Avenue King of Prussia, PA 19408
ED 002061 00043383-00019
2246
S. SLOMKOWSKI
6.6.1 micro-suspension polymerization Suspension polymerization in which the diameter of the monomer droplets is of the order of a few pm.
7. TERMS RELATED TO POLYMERIZATION PROCESSES
7.1
average number of radicals per particle, <N> or N
Ratio of the total number of radicals in particles to the number of particles.
7.2
critical oligomer degrees of polymerization
7.2.1 critical oligomer degree of polymerization for irreversible entry, zcrit
Lowest degree of polymerization of aqueous-phase oligomer-radicals needed for irreversible capture by colloidal particles, micelles, or both during a polymerization.
7.2.2 critical oligomer degree of polymerization for precipitation, ycrit
Lowest degree of polymerization of oligomer-radicals that precipitate from the continuous phase dur ing a polymerization.
Note. j crit is usually equal to the degree of polymerization at which oligomer-radicals undergo a coil-to-globule transition.
7.3
intervals in emulsion polymerizations
Periods in an emulsion polymerization defined by the formation of polymer particles, and the presence or absence of monomer droplets in the polymerizing mixture.
Note. In naming particular intervals, the word "interval" is always written with a capital I.
7.3.1 Interval 1 in emulsion polymerization
Period in a batch ab initio emulsion polymerization (see definitions 6.1.1 and 6.1.2) during which the formation of particles takes place.
7.3.2 Interval 2 in emulsion polymerization
Period in an emulsion polymerization during which no new particles are formed and monomer droplets are present.
Note'. This interval is associated with an approximately constant value of the average number of radicals per particle, an approximately constant value of monomer concentration in the particles, and, thus, an approximately constant rate of polymerization.
7.3.3 Interval 3 in emulsion polymerization
Period in an emulsion polymerization during which no new particles are formed and no monomer droplets are present.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appi. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 1S406
ED 002061 00043383-00020
Terminology of Polymers
2247
7.4
limiting rate-behaviour in emulsion polymerizations
7.4.1 zero-one behaviour
Limiting behaviour in an emulsion, mini-emulsion, or micro-emulsion polymerization during which the entry of a radical into a particle that contains a growing radical results in termination before significant propagation has occurred.
Note I: This type of behaviour commonly occurs for small particles, the size of which depends on the type of monomer and on polymerization conditions.
Note 2: The value of the average number o f radicals per particle (N) for a zero-one system can never exceed 0.5.
7.4.1.1 compartmentalization behaviour Zero-one behaviour wherein radicals are isolated, each being located within a different latex particle.
7.4.2 pseudo-bulk behaviour
Behaviour in an emulsion, mini-emulsion, micro-emulsion, suspension, or dispersion polymerization wherein the kinetics are such that the rate equations are the same as those for polymerization in bulk.
Note 1: In a pseudo-bulk system, the average number o f radicals per particle, N, can take any value.
Note 2: Common extreme cases are (i) when the value of ^ is so high that each particle effec
tively behaves as a micro-reactor, and (ii) when the value of N is low, exit is very rapid and the exited radical re-enters another particle, may grow to a significant degree of polymerization, and so on before any termination event.
7.5
oligomer radical
radical of oligomeric length
Note: For the definition of an oligomer, see ref. [1].
7.6
particle nucleation
7.6.1 homogeneous micellization nucleation
Formation of primary particles as a result of micelle formation from surface-active oligomer radicals formed in a polymerization.
Note: The surface-active oligomer radicals are usually formed by polymerization with initia tors providing ionic end-groups.
7.6.2 homogeneous nucleation
Formation of primary particles as a result of the coil-to-globule transition of oligomer radicals that have propagated to the critical oligomer degree o fpolymerization for precipitation.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appi. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. 900 Rrsi Avenue King of Prussia, PA 19406
ED 002061 00043383-00021
2248
S. SLOMKOWSKI
7.6.3 micellar nuclation
Formation ofprimary particles as a result of polymerization within monomer-swollen micelles initiated by the capture ofprimary radicals or oligomer-radicals.
7.6.4 coagulative nuclation
process combining nuclation by any mechanism with subsequent coagulation being a significant event in formation of colloidally stable particles.
Note: The term "coagulative nuclation" does not mean that nuclation is caused by coagula tion.
7.7
phase-transfer event in a polymerizations in a dispersed system
Transport of any species (radical, monomer, chain-transfer agent, etc.) from the continuous to the dis crete phase and vice-versa.
7.7.1 radical desorption See radical exit.
7.7.2 radical entry
Irreversible transport of a radical from the continuous to the dispersed phase.
Note: This type of transport frequently involves a radical arising directly from initiator. An example is the sulfate radical anion SO'fr, with the systematic name tetraoxidosulfate (1-) (where the part in parentheses is pronounced "dot one minus"), propagating with monomer in the aqueous phase until the resulting oligomeric species enters a particle irreversibly.
7.7.2.1 entry frequency See radical entry frequency.
1.1.2.2 radical entry frequency, / en, SI unit: s"1 entry frequency
Average number of entry events per particle per unit interval of time.
Note: The term "entry rate coefficient" is incorrect and is not recommended.
7.7.3 radical exit radical desorption
Reversible or irreversible transport of a radical from the dispersed to the continuous phase.
Note:
This type of transport is frequently through transfer of the radical activity at the end of a macroradical within a particle to a smaller species which may then diffuse irreversibly out of the parent particle into the continuous phase.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appi. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19408
ED 002061 00043383-00022
Terminology of Polymers
2249
7.7.3.1 exit frequency See radical exit frequency.
1 ,1 3 2 radical exit frequency,^, SI unit: s'"1 exit frequency
Average number of exit events per particle per unit interval of time per radical.
Note: The term "exit rate coefficient" is incorrect and is not recommended.
7.8
primary particle
Particle just created by a nucleation process.
7.9
primary radical
Radicals formed from an initiator molecule.
Note: "Primary radical" describes the radical before it reacts with any molecule of monomer.
7.10
seed particle
Particle in a polymer colloid that is the locus of subsequent polymerization.
Note: A seed particle is either added to a polymerization mixture before the polymerization begins, or is formed in situ.
7.11
surfactant related species
7.11.1 surfmer
Monomer with the properties of a surfactant.
Note: For the definition of a surfactant, see ref. [4].
7.11.2 inisurf Initiator with the properties of a surfactant.
Note: For the definition of a surfactant, see ref. [4],
7.11.3 transurf Chain-transfer agent with the properties of a surfactant.
Note: For the definition of a surfactant, see ref. [4],
8. AGGREGATION AND RELATED PROCESSES
8.1
aggregation, coagulation,flocculation, and related processes
8.1.1 agglomerate (exceptin polymer science)
Cluster of primary particles held together by weak physical interactions.
2011, IUPAC Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Arkema inc. 900 First Avenue King of PrussiiJ, PA 19408
Tiers 8&9
ED 002061 00043383-00023
2250
S. SLOMKOWSKI
Note l : A primary particle is the smallest discrete identifiable entity observable by a specified identification technique, e.g., transmission electron microscopy, scanning electron microscopy, etc.
Note 2: The particles that comprise agglomerates can be dispersed again.
Note 3: The definition proposed here is recommended for distinguishing agglomerate from aggregate.
8.1.2
agglomerate (in polymer science) aggregate (in polymer science)
Cluster of molecules or particles that results from agglomeration.
Note: Quotation from ref. [1],
8.1.3 agglomeration (except in polymer science) coagulation (except in polymer science) flocculation (except in polymer science)
Process of contact and adhesion whereby dispersed molecules or particles are held together by weak physical interactions ultimately leading to phase separation by the formation of precipitates of larger than colloidal size.
Note 1: In contrast to aggregation, agglomeration is a reversible process.
Note 2: The definition proposed here is recommended for distinguishing agglomeration from aggregation. Also, see Note 2 of 8.1.1.
Note 3: Quotation from ref. [1].
8.1.4
agglomeration (in polymer science) aggregation (in polymer science) coagulation (in polymer science)
Process in which dispersed molecules or particles assemble rather than remain as isolated single mole cules or particles.
Note: Quotation from ref. [1],
8.1.5 aggregate (except in polymer science)
Cluster of primary particles interconnected by chemical bonds.
Note 1: The particles that comprise aggregates cannot he dispersed again.
Note 2: Alternative definitions of aggregate and agglomerate are used in catalysis [4], The dis tinction offered by these definitions is in conflict with the distinction understood in the wider context and with the concepts of aggregation and agglomeration. To avoid con fusion the definitions proposed here are recommended.
8.1.6 aggregate (in polymer science) See agglomerate (in polymer science).
2011, IUPAC
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema Inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00024
Terminology of Polymers
2251
8.1.7 aggregation (except in polymer science)
Process whereby dispersed molecules or particles form aggregates.
Note: In contrast to agglomeration (except in polymer science), aggregation is an irreversible process,
8.1.8 aggregation (in polymer science) See agglomeration (in polymer science).
8.1.9 breaking of an emulsion Formation of a system with separate macrophases from an emulsion.
8.1.10 coalescence
Disappearance of the boundary between two particles in contact, or between a particle and a polymer macrophase followed by changes of shape leading to a reduction of the total surface area.
Note 1: Definition modified from that in ref. [4],
Note 2: The coagulation of an emulsion, viz. the formation of aggregates, may be followed by coalescence. If coalescence is extensive it leads to the breaking o f an emulsion.
8.1.11 coagulation (in polymer science)
Irreversible formation of aggregates in which particles are in physical contact. Note: Often the term is used when electrostatically stabilized colloids are destabilized by the addition of a salt.
8.1.11.1 critical coagulation (amount) concentration, ccc, accepted for use with SI unit: mol L 1
Minimum concentration of electrolyte at and above which rapid coagulation occurs.
Note I: Rapid coagulation occurs when the only forces between the particles are the attractive van der Waals forces, all other forces being negligible.
Note 2: As the value of the ccc depends to some extent on the experimental circumstances (method of mixing, time between mixing and determining the state of coagulation, cri terion for measuring degree of coagulation, etc.), these should be clearly stated.
8.1.11.2 heterocoagulation Coagulation of particles of different kinds or sizes, or both.
8.1.11.3 homocoaguiation Coagulation of colloidal particles of the same size and kind.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema Inc. SGQ First Avenue King of Prussia, PA 184Q6
ED 002061 00043383-00025
2252
S. SLOMKOWSKI
8.1.12 colloidal crystal
Assembly of colloid particles with a periodic structure that conforms to symmetries familiar from molecular or atomic crystals.
Note: Colloidal crystals may be formed in a liquid medium or during drying of particle sus pension.
8.1.13 creaming
Macroscopic separation of an emulsion or suspension, under the action of centrifugal or gravitational field, into an upper layer of a highly concentrated emulsion or suspension and a more dense continuous phase.
Note: Definition modified from that in ref. [4],
8.1.13.1 cream Highly concentrated emulsion or dispersion formed by creaming.
Note I: Definition modified from that in ref. [4], Note 2: The droplets or particles in the cream may be colloidally stable, coagulated, or floccu
lated but they should not have coalesced.
8.1.14 fast coagulation rate rapid coagulation rate
Rate of coagulation in the absence of any repulsive barrier between particles.
Note: The fast coagulation rate is usually measured by adding electrolyte at an increasing con centration, until the observed coagulation rate becomes independent of the electrolyte concentration.
8.1.14.1 fast coagulation rate coefficient, fas{, accepted for use with SI unit: L mol"1 s"1 Rate coefficient for fast coagulation.
8.1.14.2 rapid coagulation rate Seefast coagulation rate.
8.1.15 flocculation (in polymer science) Reversible formation of aggregates in which the particles are not in physical contact.
8.1.15.1 floe Aggregate formed by flocculation.
8.1.15.2 flocculation rate coefficient, floc, accepted for use with SI unit: L mol"1 s"!
Rate coefficient for flocculation.
2011, IUPAC
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00026
Terminology of Polymers
2253
8.1.16 micellization Process in which surface-active molecules or ions aggregate into micelles.
8.1.16.1 critical micelle concentration, Cmc, accepted for use with SI unit: L mol"'1 s'"1
The concentration of surface-active molecules at which micelles start to form in a solution.
Note: The above definition is based on explanation given in ref. [4], "There is a relatively small range of concentrations separating the limit below which virtually no micelles are detected and the limit above which virtually all additional surfactant forms micelles. Many properties of surfactant solutions, if plotted against the concentration, appear to change at a different rate above and below this range. By extrapolating the loci of such a property above and below this range until they intersect, a value may be obtained known as the cmc. As values obtained using different properties are not quite identical, the method by which the cmc is determined should be clearly stated."
8.1.17 orthokinetic coagulation
Coagulation due to collisions of particles induced by hydrodynamic motion.
Note: Orthokinetic coagulation occurs when shear-induced collisions dominate over colli sions due to Brownian motion.
8.1.18 particle monolayer Monolayer of particles deposited at an interface.
Note 1: For the definition of monolayer see ref. [4], Note 2: A monolayer of regularly deposited particles is called a two-dimensional colloidal crys
tal.
8.1.19 perikinetic coagulation Coagulation due to collisions of particles caused by their Brownian motion.
Note: Perikinetic coagulation occurs in the absence of mixing or under conditions where shear-induced collisions are negligible compared to diffusion-induced collisions.
8.1.20 slow coagulation rate Rate of coagulation in presence of repulsive barriers between particles,
8.1.20.1 slow coagulation rate coefficient, slow, accepted for use with SI unit: L mol"1 s '1 Rate coefficient for slow coagulation.
8.1.21 stability ratio or Fuchs stability ratio, W
Ratio W= %ast/&sjow or W Aas/*floc' for coagulation or flocculation, respectively, with fost, slow, and &floc measured under the same mixing (or hydrodynamic) conditions.
2011, IUPAC
Pure Appl. Chem., Vol, 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema inc. 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00027
2254
S, SLOMKOWSKI
Note: When comparing W with theory, the fast coagulation rates are often approximated by the Smoluchowski rates of coagulation (for the Smoluchowski kinetic equation of coag ulation, see ref. [5]).
8.2
colloidally stable system
System in which the particles essentially do not aggregate or sediment.
Note: The definition is based on the definition of colloidally stable given in ref. [4].
8.2.1 electrostatic stabilization
Stabilization of a colloid resulting from the mutual repulsion of the electrical double layers surround ing its particles.
8.2.2 electrosteric stabilization Stabilization of a colloid that has both steric and electrostatic stabilization characteristics.
8.2.3 steric stabilization
Stabilization of a colloid resulting from covering particles with a layer of molecules solvated by the continuous medium.
9. MEMBERSHIP OF SPONSORING BODY
Membership of the IUPAC Polymer Division Committee for the period 2010--2011 was as follows: President. C. K. Ober (USA); Vice President. M. Buback (Germany); Secretary. M. Hess
(Germany); Titular Members: D. Dijkstra (Germany); R. G. Jones (UK); P. Kubisa (Poland); G. T. Russell (New Zealand); M. Sawamoto (Japan); R, F. T. Stepto (UK), J.-P. Vairon (France); Associate Members: D. Berek (Slovakia); J. He (China); R. Hioms (France); W. Mormann (Germany); D. Smith (USA); J. Stejskal (Czech Republic); National Representatives: K.-N. Chen (Taiwan); G. Galli (Italy); J. S. Kim (Korea); G. Moad (Australia); M. Raza Shah (Pakistan); R. P. Singh (India); W. M. Z. B. Wan Yunus (Malaysia); Y. Yagci (Turkey); M. Zigon (Slovenia),
Membership of the Commission on Macromolecular Nomenclature (extant until 2002), the Subcommittee on Macromolecular Terminology (2003--2005), and the Subcommittee on Polymer Terminology (2006-) during the preparation of this report (1996-2008) was as follows:
G. Allegra (Italy); M. Baron (Argentina, Secretary 1998-2003); T. Chang (Korea); C. G. Dos Santos (Brazil); . Fradet (France); K. Hatada (Japan); M. Hess (Germany, Chair 2000-2004, Secretary 2005-2007); j. He (China); K.-H. Hellwich (Germany); R. C. Hioms (France); P. Hodge (UK); K. Horie (Japan); A. D. Jenkins (UK); J.-I, Jin (Korea); R. G. Jones (UK, Secretary 2003-2004, Chairman from 2005); J. Kahovec (Czech Republic); T. Kitayama (Japan, Secretary from 2008); P. Kratochvil (Czech Republic); P. Kubisa (Poland); E. Marchal (France); S. V. Meille (Italy); I. Meisel (Germany); W. V. Metanomski (USA); G. Moad (Australia); W. Mormann (Germany); C. Nol (France); S. Penczek (Poland); L. P. Rebelo (Portugal); M. Rinaudo (France); V. P. Shibaev (Russia); I. Schopov (Bulgaria); M. Schubert (USA); S. Slomkowski (Poland); R. F. T. Stepto (UK, Chair to 1999); D, Tabak (Brazil); J.-P. Vairon (France); M. Vert (France); J. Vohlidal (Czech Republic); E. S. Wilks (USA); W. J. Work (USA, Secretary to 1997).
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema Inc. 900 First Avenue King of Prussia, PA 19408
ED 002061 00043383-00028
Terminology of Polymers
2255
Others contributing to this report, J. M. Asua (Spain); F. Candau (France); , Dyrli (Norway); M. S. El-Aasser (USA); R. Fitch (USA); A. van Herk (Netherlands); D. Horak (Czech Republic); Peter Lovell (UK); O. Karlsson (Sweden); H. Kawaguchi (Japan); G. Poehlein (USA); B, Saunders (Australia); C. Schellenberg (Germany); J. Snuparek (Czech Republic); J. Stubbs (USA); D. Sundberg (USA).
10. REFERENCES
1. IUPAC. Compendium o f Polymer Terminology and Nomenclature, IUPAC Recommendations 2008 (the "Purple Book"). Edited by R. G. Jones, J. Kahovec, R. Stepto, E. S. Wilks, M. Hess, T. Kitayama, W. V. Metanomski, RSC Publishing, Cambridge, UK (2008).
2. (a) R. F. T. Stepto. "Dispersity in polymer science (IUPAC Recommendations 2009)", Pure Appl. Chem. 81, 351 (2009); (b) R. F. T. Stepto. Errata. Pure Appl. Chem. 81, 779 (2009).
3. K. S. W. Sing, D. H. Everett, R. . W. Haul, L. Moscou, R. A. Pierotti, J. Rouqurol, T. Siemieniewska. "Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity", Pure Appl. Chem. 57, 603 (1985).
4. IUPAC. Compendium o f Chemical Terminology, 2nd ed. (the "Gold Book"). Compiled by A. D. McNaught and A. Wilkinson. Blackwell Scientific Publications, Oxford (1997). XML on-line corrected version: doi:10.1351/goldbook (2006--) created by M. Nie, J. Jirat, B. Kosata; updates compiled by A. Jenkins.
5. M. von Smoluchowski. Z. Phys., Chem. Stoechiom. Verwandschaftsl. 92, 129 (1917).
Republication or reproduction o f this report or its storage and/or dissemination by electronic means is permitted without the need fo r form al IUPAC permission on condition that an acknowledgment, with fu ll reference to the source, along with use o f the copyright symbol , the name IUPAC, and the year o f publication, are prominently visible. Publication o f a translation into another language is subject to the additional condition o f prior approval from, the relevant IUPAC National Adhering Organization.
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
Arkema Ina. 9 First Avenue Kins of Prussia, PA 19-106
ED 002061 00043383-00029
2256
S. SLOMKOWSKI
APPENDIX A: ALPHABETICAL LIST OF TERMS AND GROUPS OF TERMS
ab initio emulsion polymerization ad-micelle aerogel agglomerate (except in polymer
science) agglomerate (in polymer science) agglomeration (except in polymer
science) agglomeration (in polymer science) aggregate (except in polymer science) aggregate (in polymer science) aggregation (except in polymer
science) aggregation (in polymer science) artificial latex average number of radicals per particle average particle diameters and particle-diameter dispersity batch emulsion polymerization breaking of emulsion coagulative nuclation coagulation (except in polymer
science) coagulation (in polymer science) coalescence colloid colloidal colloid stabilizer colloidal crystal colloidal suspension colloidally stable system compartmentalization behaviour composite particle continuous emulsion polymerization continuous phase continuous-phase concentration core-shell particle cream creaming critical coagulation concentration critical oligomer degree of
polymerization for irreversible entry critical oligomer degree of polymerization for precipitation critical micelle concentration dispersed phase dispersed-phase concentration
6.1.1 5.10.2 5.9.1.2 8.1.1
8.1.2 8.1.3
8.1.4 8.1.5 8.1.6 8.1.7
8.1.8 2.7.1 7.1
3.2
6.1.2 8.1.9 7.6.4 8.1.3
8.1.4 8.1.10 5.5 5.5.1 5.5.2 8.1.19 5.7.1 8.2 7.4.1.1 4.2 6.1.3 5.2 5.15 4.3.1 8.1.13.1 8.1.13 8.1.11.1 7.2.1
7.2.2
8.1.16.1 5.1 5.14
dispersion
5.4
dispersion medium
5.3
dispersion polyaddition
6.5.3.1
dispersion polycondensation
6.5.2.1
dispersion polymerization
6.5.1
electrostatic stabilization
8.2.1
electrosteric stabilization
8.2.2
emulsifier-free emulsion
6.1.4
polymerization
emulsion
5.8
emulsion polymerization
6.1
encapsulating emulsion
6.1.5
polymerization
entry frequency
7.7.2.1
equivalent diameter of non-spherical 3.1
particle
exit frequency
7.7.3.1
fast coagulation rate
8.1.14
fast coagulation rate coefficient
8.1.14.1
floe
8.1.15.1
flocculation (in polymer science)
8.1.3
flocculation rate coefficient
8.1.15.2
gel
5.9
gel microparticle
2.5.1
gel nanoparticle
2.5.2
hemi-micelle
5.10.1
hemisphere morphology
4.3.5
heterocoagulation
8.1.11.2
homocoagulation
8.1.11.3
homogeneous micellization nuclation 7.6.1
homogeneous nuclation
7.6.2
homogeneous particle
4.2
hybrid latex
2.7.4
hydrogel
5.9.1.1
inisurf
7.11.1
Interval 1
7.3.1
Interval 2
7.3.2
Interval 3
7.3.3
intervals in emulsion polymerizations 7.3
inverse emulsion polymerization
6.1.6
inverse micro-emulsion
6.2.1
polymerization
inverse mini-emulsion polymerization 6.4.1
inverse latex
2.7.6
inverted core-shell particle
4.3.2
latex
2.7
latex particle
2.7.2
macro-emulsion
5.8.2
2011, IUPAC
Sierra Club v. EPA 18cv3472 NDCA
Pure Appi
Chem., Voi. 83,
No.
12,
pp.
2
2
29-2259, 900
FA2irrsk0teA1mv1aenInuce.
King of Prussia, PA 1S406
Tiers 8&9
ED 002061 00043383-00030
2257
macroporous particle mass-average particle diameter mesoporous particle micellar aggregation number micellar charge micellar degree of association micellar molecular weight micellar nuclation micellar polymerization micellar relative molar mass micelle micellization microcapsule microdomain morphology micro-emulsion micro-emulsion polymerization microgel microporous particle micro-suspension polymerization mini-emulsion mini-emulsion polymerization monomer-flooded emulsion polymerization monomer-starved emulsion
polymerization multicomponent particle multilayered particle nanocapsule nanogel natural latex non-aqueous dispersion number-average particle diameter occluded particle oligomer-radical orthokinetic coagulation parachute morphology partially engulfed particle particle-diameter dispersity particle monolayer particle number concentration particle-phase concentration perikinetic coagulation phase-transfer events in
polymerization in dispersed system polymer bead polymer colloid polymer content polymer dispersion polymer emulsion polymer gel
2011, lUPAC
4.4 3.2.3 4.5 5.10.3 5.10.4 5.10.5 5.10.6 7.6.3 6.3 5.10.7 5.10 8.1.16 4.3.1.1 4.3.4 5.8.4 6.2 2.5.3 4.6 6.6.1 5,8.3 6.4 6.1.7
6.1.8
4.3 4.3.3 4.3.1.2 2.5.4 2.7.5 5.4.1 3.2.1 4.3,4 7.5 8.1.17 6.1.12 4.3.5 3.2.6 8.1.18 5.12 5.16 8.1.19 7.7
2.2 5.6 5.13.1 5.4.2 5.8.1 5.9.1
polymer gel particle
2.5
polymer mass fraction
5.17
polymer microcapsule
2.3.2
polymer microparticle
2.3
polymer microsphere
2.3.1
polymer nanocapsule
2.4.2
polymer nanoparticle
2.4
polymer nanosphere
2.4.1
polymer network particle
2.6
polymer particle
2.1
power-feed emulsion polymerization 6.1.9
precipitation polyaddition
6.5.3
precipitation polycondensation
6.5.2
precipitation polymerization
6.5
primary particle
7.8
primary radical
7.9
pseudo-bulk behaviour
7,4.2
radical desorption
7.7.1
radical entry
7.7.2
radical entry frequency
1.12.2
radical exit
7.7.3
radical exit frequency
1.1.32
rapid coagulation rate
8.1.14.2
seeded dispersion polymerization
6.5.1.1
seeded emulsion polymerization
6.1.6
seed particle
7.10
semi-batch emulsion polymerization 6.1.2
semi-continuous emulsion
6.1.11
polymerization
slow coagulation rate
8.1.20
slow coagulation rate coefficient
8.1.20.1
solids content of a polymer dispersion 5.13
stability ratio
8.1.21
steric stabilization
8.2.3
structured particle
4.7
surface-average particle diameter
3.2,2
surfmer
7.11.1
suspension
5.7
suspension polymerization
6.6
synthetic latex
2.7.3
transurf
7.11.3
vesicle
5.11
vesicle polymerization
6.1.12
volume-average particle diameter
3.2.5
water/oil emulsion
5.8
z-average particle diameter
3.2.4
zero-one behaviour
7.4.1
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Sierra Club v. EPA 18cv3472 NDCA
Tiers 8&9
Arkema Inc* 900 First Avenue King of Prussia, PA 19406
ED 002061 00043383-00031
2258
S. SLOMKOWSKI
APPENDIX B: LIST OF RECOMMENDED SYMBOLS AND ABBREVIATIONS
[ A ] ConS' IA ]cont(/) [A]p, [A]pfo t...)
[A]w
c cc
Cmc _
continuous-phase (amount) concentration for species A dispersed-phase (amount) concentration for species A, particle-phase (amount) concentration for species A
(amount) concentration of species A in water critical coagulation (amount) concentration critical micelle (amount) concentration
< JN),iiN
- -
number average particle diameter
d ' <4ny <dn )' <ds) , d s
<dy),d y
<dmU m
<d7),dz 2f&Xi Jf$x
ic rit
^floc ^slow ^ i c o n t ' [M (i,...)]cont
[M ]p, [M(r,i,...)]p
[M ]w ....
particle-diameter dispersity surface average particle diameter
volume average particle diameter
mass average particle diameter z-average particle diameter radical entry frequency, entry frequency radical exit frequency, exit frequency critical oligomer degree of polymerization for precipitation fast coagulation rate coefficient flocculation rate coefficient slow coagulation rate coefficient continuous-phase (amount) concentration for monomer dispersed-phase (amount) concentration for monomer,
particle-phase (amount) concentration for monomer monomer (amount) concentration in water
<N>, N
average number of radicals per particle
C
particle number concentration
O/W
oil/water
W
stability ratio
w/o
water/oil
polymer mass fraction
wp
critical oligomer degree of polymerization for irreversible entry
Zcrit
5.15 5.14
5.15
8 .1 .1 1 .1 8 .1 .1 6 .1
3.2.1
3 .2 .6
3.2.2
3 .2 .5
3.2.3 3.2.4
1 .1 .2 2 1 .1 3 .2
7.5.2
8 .1 .1 4 .1 8 .1 .1 5 .2 8.1.20.1
5.15 5.14
5.15
7.1
5.12 5.8
8.1.21
5.8
5 .1 7
7.2.1
2011, IUPAC Sierra Club v. EPA 18cv3472 NDCA
Pure Appl. Chem., Vol. 83, No. 12, pp. 2229-2259, 2011
Arkema jnc, 900 First Avenue King of Prussia, PA 1S408
Tiers 8&9
ED 002061 00043383-00032
Terminology of Polymers
2259
NOTE ADDED IN PROOF Before this article was ready for printing we found the following errors:
3.2
average particle diameters and particle-diameter dispersity
Replace Note 7 with:
Note 7:
The term "particle-diameter dispersity" and the symbol >d are an extension of the terms molar massjiispersity (f?M) and degree-of-polymerization dispersity (>x), where f?M =
M JM V and >x =
[2].
'
4.3.5 partially engulfed particle
Figure 1 has been revised, "particle (7.9.)" has been changed to "particle (7.10)" and "polymerization (6.1.9.)" has been changed to "polymerization (6.1.10.)"
Polymer in seed Polymer formed during seeded particle (7.10.) polymerization (6.1.10.)
Core-shell particles (4.3.1.)
Inverted coreshell particle
(4.3.2.)
Multilayered particle (4.3.3.)
Fig. 1 Examples of two-phase particle morphology.
Occluded particle (4.3.4.)
Partially engulfed particles (4.3.5.)
8.1.16.1 critical micelle concentration, c , accepted for use with SI unit: L mol"'1 s '1 ("Cmc" has been changed to "cmc").
APPENDIX B: LIST OF RECOMMENDED SYMBOLS AND ABBREVIATIONS
jp'erit
critical oligomer degree of polymerization for precipitation
("7.5.2" should be "7.2.2")
W
stability ratio or Fuchs stability ratio
(added "or Fuchs stability ratio")
7.2.2 8.1.21
2011, IUPAC A8KP0rihnk0ogenmFoeiar:fsPtI6nrA1cu.v0s.e-s2nia0u,5eP-7e0n0n0sylvania 19406
Sierra Club v. EwPwA.Mt1em8ac.evo3m472 NDCA
Pure Appl. Chem., Vo!. 83, No. 12, pp. 2229-2259, 2011
Tiers 8&9
ED 002061 00043383-00033