Document 44gomeGK1kdnE4LQ9d97pDRbj

Pipe and Tube Revere Copper and Brass Incorporated Executive office: 230 Park Avenue, New York City MILLS--Baltimore, Mr, Taunton. Mass., New Bedford, Mass. Rome, N. Y., Detroit. Mica.. Chicago. III. SALES OFFICES Boston. Mass., Providence. R. I.. Philadelphia. Pa.. Atlanta, Ga., New Orleans, La., New York, N. Y., Pittsburgh, Pa., Cleveland, Ohio, Cincinnati, Ohio, Grand Rapids, Mich., Milwaukee, Wise., St. Louis, Mo. Minneapolis, Minn., Dallas, Texas, Seattle, Wash., San Francisco, Calif., Los Angeles, Caijf. REVERE COPPER WATER TUBE Revere Copper Water Tube is recom mended for heating lines, refrigerant lines, heat control lines and for other heating and ventilating piping. This tube is seamless, 99.9 per cent pure copper, completely deoxidized, with a gun-barrel finish inside. It is furnished in three types known as "K," "L," and "M," which meet Govern ment and A.S.T.M. specifications. In general the Type "K" is used where cor rosive conditions are severe, and types "L" and " M" where these conditions are normal. For most heating work, Types "L" and "M" are satisfactory. Types "K" and "L" are furnished in both hard and soft tempers; Type "M " in hard temper only. The hard temper is used for new and exposed work; the soft temper for hidden replacement work and where flexibility is essential. (A 40 page hand book on Revere Copper Water Tube will be sent on request.) Fittings--This tube is joined with Streamline soldered fittings or with any standard make of compression fittings. Thus, threading is eliminated and metal in S.P.S. pipe used only for cutting threads is saved. The wall thickness of Revere Copper Water Tube is uniform throughout and the joints are leak-proof, vibrationproof and stronger than the tube itself. The Streamline fitting is so made that friction is reduced to a minimum. Advantages of Revere Copper Water Tube--In brief these are as follows: steel. The range of sizes is such that a balanced system can be designed using minimum pipe sizes. 4. In general pipe covering can be one size smaller with Copper Water Tube than for the same size I.P.S. pipe because of the smaller outside diameter of the tube. It can also be light in weight just heavy enough to prevent convection losses. 5. Because of its flexibility and the ingenuity with which Copper Water Tube can be joined with Streamline Soldered Fittings, this tube is recommended for all sorts of special hook-ups. To Heating and Air Conditioning Manufacturers--Revere Engineers are anxious to cooperate with manufacturers of heating and air conditioning equipment and to make recommendations with refer ence to the use of non-ferrous products. Revere Copper Water Tube STANDARD DIMENSIONS AND WEIGHTS Size TYPE IC TYPE L TYPE M in O.D. Well Wt Wan Wt. w*n Wt la. in Thick* Lbs. Thick- Lbs. Thick- Lbs. la. ness per Ft. ness per Fl ness per Fl In. In. In. V, .300 .049 .269 .035 .198 .025 .144 Vi .625 Y%f .750 .875 | 1.125 \'/f 1.375 1.625 .049 .049 .065 .065 .065 .072 .344 .040 .418 .042 .641 .045 .839 .050 1.040 .055 1.360 .060 .285 .028 .362 .455 .032 .655 .035 .884 .042 1.140 .049 .203 .328 .464 .681 .940 1. Revere Copper Water Tube has many installation advantages. With Streamline Fittings it can be installed in a minimum of space. The soft temper tube can be bent where needed, as for example, around spandrel beams. This saves installation ' time and eliminates fittings. Furring is greatly reduced. Joints may be easily disassembled. 2. Revere Copper Water Tube cannot rust, so that it is not necessary to install oversize pipe. It is recommended par ticularly for steam return lines where the greatest amount of corrosion takes place. 3. In forced circulation hot water heating systems, where small pipe sizes are used, Copper Water Tube can be installed at prices that are competitive with iron or 2 2.125 .083 2.060 .070 1.750 .058 1.460 % 2.625 .095 2.920 .080 2.480 .065 2.030 3 3.(25 .109 4.000 .090 3.330 .072 2.680 m 3.625 .120 5.120 .100 4.290 .083 3.580 4 4.125 .134 6.510 .110 5.380 .095 4.660 5 5.125 .160 9.670 .125 7.610 .109 6.660 6 6.125 .192 13.870 .140 10.200 .122 8.910 8 8.125 .271 25.900 .200 19.290 .170 16.460 Recommended Operating Pressures Type K--Hard Temper.. .. . --...... np to 400 pounds Type K--Soft Temper _ up to 250 pounds Type L--Hard Temper___________ ____.up to 250 pounds Type L--Soft Temper...............................up to 150 pounds Type M--Hard Temper------------------------up to 250 pounds Tempers and Lengths Type K--Hard and Soft Temper in straight 20 ft lengths Type L--Soft Temper in 30 ft, 45 ft, and 60 ft coils. Type M--Hard Temper in straight 20 ft lengthq 1038 Pipe and Tube (Copper) Wolverine Tube Company SEAMLESS COPPER, BRASS AND ALUMINUM Main Office and Mill: 1411 Central Avenue, Detroit, Mich. New York Office: 420 Lexington Avenue Sales Offices Atlanta, Ga.. .411 Georgia Savings Bank Bldg. Baltimore, Md-------------------- 308 Hearet Tower Bldg. Boston (Charlestown), Mass. ___ 410 Rutherford Ave. ........Buffalo, N. Y. Chicago, III ___ Court and WUkeson 129 S. Jefferson SL Cleveland, Ohio... ...1740 East 12th St. Dallas, Texas ____ 1916 Young St. Datton, Ohio------ ...Route No. 9 DAeEnNvVeKbB, Cv.oeljxoi------------------. _1210 California SL jONQ Island Citt, N. Y... ___ 23-10 44th Road .os Anobles, Caui------- _1015 East 16th St. Newark, N. J Philadelphia, Pa~. Pittsburgh. Pa__ . Portland. Ore.__ Richmond, Va Sr. Louis, Mo.. San Francisco, Cali?. Seattle, Wash.--------Washington, D. C-----Toronto, Om----- -----Winnipeg, Man__.___ ______965 Broad SL _231 North 12th SL 1228 Brighton RrL, NR. ____ 524 N. W. 14th Ave. -Mutual Bldg. --4067 Park Ave. _____ 7 Front SL _1005 E. Pike SL ____1108 16th SL __20 Beverley SL --80 Lombard St. EXPORT: H. M. Robins Co., 120 Madison Ave., Detroit. U. S.A DEOXIDIZED COPPER Government Type L, WATER TUBE A.S.T.M. Class L Copper with a purity of not less than 99.9 per cent is used in the manufacture of Wolverine Copper Water Tubing. The use of pure copper and the extreme care followed in the process of manufacture For Oil Burner, Air Conditioning, Refrigeration, and general plumbing uses. Suitable for normal water conditions. Furnished in hard or soft temper in straight 20 ft lengths; soft temper in 30, 45 and 60 ft coils. accounts for the uniformity in quality, the resistance to corrosion, and the widespread use of Wolverine Copper Water Tubing. Government Type M, A.S.T.M. Class M The mirror-like inside surface refuses to collect scale or sediment. The ductility of WolverineCopper Water Tubing permits repeated freezing before it will burst. The ease of installation when using Wolverine Copper Water Tubing with compression or Suitable for Air Conditioning and Refrigeration installations and for interior plumbing and heating purposes. Furnished in hard temper in straight 20 ft lengths only. For use with soldered fittings only. sweat fittings is due to the close tolerances FABRICATED TUBING to which the tube is held. Wolverine offers a complete and com Resistance to rust and corrosion permits the use of smaller lines when Wolverine Copper Water Tubing is specified instead of metals that rust. petent fabrication service for tube parts. This includes bending, flaring, swaging, brazing, etc. Every operation is held rigidly to size and specification. Wolverine Deoxidized Copper Water Tubing is made to U. S. Government WW-T-799 and A.S.T.M. B 88-33 Speci fications under the regular types K, L, and M. DEHYDRATED REFRIGERATION TUBING Wolverine Dehydrated Soft Copper Refrigeration Tubing is guaranteed to meet A.S.T.M. Specification B 68-33. Government Type K, A.S.T.M. Class K. The ends of each coil of Dehydrated Refrig eration Tubing are solder-sealed and crimped in the form of Wolverine "W." Recommended for Air Conditioning, Wolverine Refrigeration Tubing, in Refrigeration, Oil Burner, and Plumbing securely wrapped coils, is now available. and Heating installations. Also for Gas, This spiral crepe paper wrapping protects Steam, Oil Lines, and industrial uses and the coil against atmospheric contact, dirt where water conditions are severe. and other foreign matter. It keeps the Wolverine Type K for Air Conditioning tubing absolutely clean until ready for use and Refrigeration fits any standard sweat and it gives the service man a compact fitting on the market. package to save room in his kit. Sizes up to 2 in. approved by Under Your local -refrigeration jobber can writers' Laboratory. supply you with any quantity or size of Furnished in hard or soft, temper in Wolverine Tubing. Large stocks carried straight 20 ft lengths; soft temper in 30, in the mill at all times for prompt ship: s 45 and 60 ft coils. ment. i 1039