Document 3vze7V3kDxzr6JxxOYZGwagD
Page 1.5.4
E&@E-P1CHER
TAB-LOK
Applicable Specifications:
Federal: HH-I-558*. Form D, Type IV, Class 14 Si 15
ASTM: C592-70. Class I & II Commercial Standard: CS-117
Packaging:
Shipped flat in cartons
1. Since the center tab is longer than the two end tabs, it is slipped through the slot on the closure strip first and then bent over.
3. The center tab which had been serving a "holding action" is now pulled up tightly and bent over for maximum tightness.
2. With the center tab holding the TAB-LOK Pipe Covering in place, the two end tabs are pulled through the slots and secured.
4. A section of pipe TAB-LOK insulated; note the staggered way closure strips are arranged to permit close abutment and to prevent voids.
Form No. AF-118
EAGLE
Since 1843
Manufactured by
EAGLE-PICHER INDUSTRIES, INC.
Fibers Department
American Building
PICHER
Cincinnati, Ohio 4S202
1969. EeQle-Picher industries, tne.
Printed In U.S.A. A377
TYPE: Pipe Covering
TEMPERATURE: to 1400 F.
EAGLE-PBCHER
TAB-LOK
Description: Eagle-Picher Tab-Lok Pipe Cover
ing is fabricated by securing high temperature mineral fibers between metal fabrics. The patented "TAB-LOK" closures are secured to the ends of the outside metal fabric and promote fast installation of the covering around the pipe. The interior metal fabric is applied in strips to offer necessary relief when the covering is wrapped around the pipe.
uses: Eagie-Picher Tab-Lok is recommended for
application on piping or other cylindrical vessels operating at temperatures up to 1400 F. Typical examples are super heated steam lines, furnace duct work and heat exchangers.
Advantages:
Installation: Tab-Lok closure allows quick attachment and snug fit of the covering.
Warehousing: Tab-Lok Pipe Insulation is shipped and stored flat to minimize trans portation and in-plant costs.
Vibration: High temperature fiber will not break down or settle under normal vibration at maximum service temperature.
"Joint Free": Resilient fiber core permits close adjustment of adjoining sections to form essen tially a joint free construction.
Physical Properties:
Service Temperature.....................To 1400F.* Density..........................' Nominal 8 lbs./cu. ft. Fire Resistance..........................Incombustible Moisture Absorption.................................. Nil Corrosion .......... Does not cause or accelerate
*Stainless or Monel metal mesh recommended above 1200F.
Thermal Conductivity:
Mean Temperature "K'-Btu-in./hr./sq. ft./F.
200 F 400 F. 600 F.
0.260 0.385 0.560
Standard Sizes:
Length:
2 Lineal Feet
Pipe Diameter: 3" to 30"
Thickness: Pipe Size Available Thickness
3" l"-ll4"-2"-2'/4" *. *
354" 4"
l"-l!4"-2"-2V4" * * * l"-114"-2"-2J4" * *
5" l"-lV4"-2"-2V4" * * *
6" 1 "-154"-2"-21S"-3" *
8" 1 "-l V4"-2"-2V4"-3"-3V4"-4"
10" 1 "-l J4"-2"-2!4"-3"-3V4"-4"
12" 1 "-U4"-2"-2!4"-3"-3J4"-4"
14" I "-lV4"-2"-2K"-3"-3H"-4"
16" 1"-1 j"-2"-2!4"-3"-3V4"-4"
18" I "-l V4"-2"-214"-3"-3V4"-4"
20" 1 "-l Ji"-2"-214"-3"-314"-4"
22" and
Over 1 "-J J4"-2"-214"-3"-3Vi"-4"
*Use double layer application.
Stpetyfoa* INSULATION
PICKER
Page 1 .S3