Document 3eGnyQdbw6DwnnpjX98KZydvx

# !="RJCTION MATERIALS STANDARDS INSTITUTE, INC., E-210 ROUTE 4, PARAMUS, N.J. #0?652 BULLETIN No. 4?1 March 9, 19?3 To: Delegates and Alternates Subject: Recommendation of Asbestos Study Committee This Bulletin concerns Asbestos and related subjects (primarily in-plant problems). Please route this to those responsible for this work. Labelino Practices The Asbestos Study Committee, after considerable discussion and debate, and careful selection of the wording, unanimously passed the following resolution at the February 16, 19?3 meeting: RESOLVED: That (1) where asbestos containing materials do not have their asbestos fiber completely locked in, or (2) where subsequent operations may be performed on asbestos containing materials, the hazardous labeling practice be adhered to in accordance with the Label Specifications in the OSHA Standards for Exposure to Asbestos Dust. In esser.ce, the Committee is saying that the members should comply with the OSHA regulations. At the next meeting, the Committee plans to make a recommendation on the size and style of the label. Enclosed are the final results of the survey which was made of the membership concerning labeling by members. We received 15 replies fron an original canvass of 25 m'ember s. ~utomaic BaR Openino Machinery In earlier bullet ins we have t>.dvi sed {he memhership of the avai labi 1 ity of asbestos bag opening machinery. Among those listed earlier were: Fairmount Engineering, Hackettstown, N. J. Stuart Gl6pat Corporation, Zanesville, Ohio Fourier Steel Works, Quebec, Canada Vance Machine Company, Van Wert, Ohio Another firm which has capabilities in the asbestos bag opening field is: Taunton Engineering Company, Inc. ?00 West Water Street Taunton, Mass. (,b2?SO FMSI 06670 D.;~ Laboratories for Samplino and/or CountinP Airborne Asbestos Fibers C~) A list of laboratories who will do sampling and/orcounting of airborne asbestos - .--L - - - - - 1!_.1._-l .. L_.,. _ _ ._ ...,!1 .... 1....1- . Bulletin ~~471 - 2- March 9, 1973 Medical Examinations for OSHA Asbestos Reeulations In the OSHA Standard for Exposure to Asbestos Dust, medical examination requirements are spelled out for workers who may be exposed to airborne asbestos fibers. Most firms with members on the Committee have already instituted the required medical examinations. There is an interesting service available from International Compumedics Corporation (ICM) where they offer to do the examinations, maintain records, etc., on what appears to be a reasonable fee basis. Please refer to their letter to the Institute of February 6, 1973. The costs indicated were for a contract with the Institute - something that was not requested and which the Institute could not directly sponsor. Any work would have to be on an individual manufacturer basis. The contact is: Mr. Don Iverson International Compumedics Corporation 14 Washington Road Princeton Junction, N. J. ;i'08550 Incidentally, we are in no position to judge the quality of ICM's work. One member plans to use their services. At the meeting one member mentioned that they have received the cooperation of the local TB and Respiratory Disease Association. The Association brings in their mobile unit and runs the X-ray and pulmohary function examinations. From this point the Company Physician conducts the balance of the exam, EWD/erc Enclosure: E. W. Dr islane Executive Director Final Results- Institute Labeling Survey Laboratories- Sampling/Counting Airborne Asbestos Fibers International Compumedics Corporation FMSI 06671 FRICTION MATERIALS STANDARDS INSTITUTE, INC., E-210 ROUTE 4, PARAMUS, N.J. #07652 To: Members of A~besto~ Study Committee Subject: General .Information i-'la.rch S, 1973 Based on discussions at the February 16, 1973 meeting, and suggestions from your Chairman, ~he following topics are covered. Labelinp Practjces ...i ' Samples of the Asbestos Caution signs used by asbestos and friction manufacturer.> are ~Hached. :one label is not per OSHA standards. This information is sent to the Commtttee for review so that they will be in a position to propose label specifications at the next meeting. Enclosed also are the results of the labeling survey made of Institute members. Of 25 requests, there were 15 replies. Laboratories for SamplinP and/or Countine Airborne Asbestos Fibers A list of laboratories and the contact (if available) for sampling and/or counting airborne asbestos fibers was prepared by the Chairman. This is distributed to the Committee for their information. Similar data will be sent to the Membership. British Conference on exposure to as~stos durinp brake end clutch maintenance (1969.1 Your Chairman has forward~apers presented at a British Conference on exposure to asbestos during brake and clutch maintenance, for distribution to the Committee. The papers are: Asbestos and Asbestosis Hygiene Standards for Asbestos ' -Technical Implementation of the New Asbestos Regulations Control of the_Use of Asbestos-Containing Friction Materials Exposure to A6bestos During Brake Maintenance Removing Dusts from Brake Assemblies During Vehicle Servicing- Alternate Cleaning Methods Possible Alternatives to Asbestos as a Friction Material Work-shop on effect of Government Safetv and Health Repualtions and Suppestions for Compliance The Committee resolved at the February meeting that it is interested in a workshop on the above. Such a work-shop would be geared toward those at administrative ieve~5actually responsible for compliance with regulations: Factory Management, Plan~ Engineering, Environmental Services, Administration, etc. This would cover items on control of asbestos, general pollution control, waste disposal and would concern equipment and techniques. The Institute would be happy to sponsor such a one day work-shop, perferably in the Paramus area but possibly at other locations. It is recommendodthat the CommittLL bring suggestions for a specific agenda. The Johns-Manville Corporation (through Bill Reitze) would like to give a presentation on their HEAF (High Energy Air Filter) pollution control equipment. It would be up to the Committee to decide whether to invite Johns-Manville- no longer an lr.s~itute member. FMSI 06672 .. .Asbestos Study Committee General Information - 2- i:arch 8, 197.3 Heat Stress Measurem,erits ,NIOSH recommendations for a standard for work in hot environments along with some spec"ifics on equipment and testing are enclosed. These had been distributed earlier to those Committee members who had attended the February 16th meeting. This subject was not discussed at the meeting. Statistical Evaluation of the Membrane Filter Method At the February meeting those who attended received copies of the Conclusions and Recomm~ndations from a private study (By LFE Corporation for the Asbestos Information Association/NA) on the precision and accuracy of the membrane filter method for measurihg airborne concentrations of asbestos fiber. Copies are distributed for those not present. (Major heading "Conclusions and Di scussion11 with pages 43-46 of the report.) International Comoumedics Corporation (ICM} Enclosed is a copy of a letter received from Mr. Don Iverson of ICM. This was discussed at the Committee meeting and is sent to insure that those not present are informed. EWD/erc Enclosure: E. W. Drislane Executive Director Sample Industry Labels Final Results- Institute Labeling Survey Laboratories- Sampling/Counting Airborne Asbestos Fibers British Conference papers (March 1969) Heat Stress Paper Statistical Evaluation of Membrane Filter Method International Compumedics Corporation FMSI 06673