Document 3Qnw5B1qVvVMM2Z42dY59eNvJ

PLAINTIFF'S EXHIBIT WBC-1 IN THE COMMON PLEAS COURT, CUYAHOGA COUNTY, OHIO IN RE: ALL BARON & BUDD CASES ) IN WHICH THE WILL-BURT ) COMPANY IS NAMED AS A ) DEFENDANT ) Plaintiffs, ) ) vs. ' ) ) ) A-BEST PRODUCTS COMPANY, ET AL.) Defendants. ) ) ASBESTOS MASTER CASE NO. 073958 JUDGE HARRY A. HANNA THE WILL-BURT COMPANY'S ANSWERS TO PLAINTIFFS' INTERROGATORIES INTERROGATORIES 1. For each Interrogatory below, please state the name and the last known address of each person answering it, including whether he/she is employed by Defendant and if employed by Defendant include job title, length of time employed by Defendant and a year by year list of all other position, titles, or jobs held when working for Defendant. Answer: a. Jeffrey Evans, The Wlll-Burt Company, Yes, President & CEO, 8 years total. Other positions: Director and Vice-President 1.1 Please identify all documents used, related to, or referred to in connection with the preparation of or answers to these Interrogatories and state the number Interrogatory and its subpart to each such document. Answer: * See documents attached to Defendant's Responses to Requests for Production. 2. Please state whether or not Defendant is a corporation. If so, please state: (a) Your correct corporate name; (b) The state of your incorporation; (c) The address of your principal place of business; (d) Your registered agent for service in the state of Ohio; (e) For each Defendant claiming that this Court lacks personal jurisdiction, list year by year the total amount of income received by Defendant from entities in Ohio, any and all years that Defendant, as defined, has been licensed to do business in Ohio, and any real property owned at any time by Defendant or its present or past subsidiaries. Answer: a. The Will-Burt Company b. Ohio c. 169 S. Main St., Orrville, OH 44667 d. Dennis Donahue e. N/A. 3. State Defendant's complete corporate or business history, including dates of incorporation, mergers, consolidations, reincorporations, and the like. Also provide historical information regarding all predecessors, prior names, asset purchases, acquisitions or spin-offs. In addition: (a) if Defendant or any of its predecessors or subsidiaries at any time purchased, assumed, or in any other manner acquired ANY of the assets and/or liabilities of any corporation or entity at any prior time engaged in any aspect of the placing of asbestos-containing products into the stream of commerce or the insuring of asbestos-related risks; then please state the following as to each acquisition: (b) the name or description of each corporation, entity or assets acquired by Defendant, that entity's state of incorporation and principal place of business, its date of incorporation, and the name of the Defendant at the time of acquisition; (c) the manner by which each such corporation, entity or interest therein, was acquired (e.g., merger, consolidation, change of name, stock sale, transfer or purchase of assets or product line); (d) the date of each such acquisition; (e) the state in which each such acquisition was effected; (f) the state law governing each such acquisition if specified by contract; (g) whether Defendant became legally responsible for the past torts of each such corporation or entity; (h) identify each document reflecting or related to the history and/or transaction(s) set forth in answer to this Interrogatory. Answer: Objection. Overbroad and Burdensome. Not calculated to lead to the discovery of admissible evidence. Without waiving said objection, The Will-Burt Company was incorporated in 1918. It was formed by William Tschantz and Burton Cope. In the 1960s, Will-Burt acquired the heating division of The Illinois Iron and Bolt Company; certain assets of the Iron Fireman Stoker Division of Space Conditioning, Inc.; the Anchor Stoker Division of Straton and Terstegg Company; the Tool and Die Operations of Dell Industries; and, Thomas Mold and Die Company. In 1986, Will-Burt became employee owned via an ESOP transaction (Employee Stock Ownership Plan). Today, the employees of The Will-Burt Company are 100% owners. In 1997, Will-Burt purchases Accurate Electronics, a company building printed circuit boards and electromechanical equipment and components. As for all of the subsections to this interrogatory, unknown. S: JHS'W'B Asbestos Answers to Interrogatories doc .7 . As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. J/6hn H. Schaeffer (S.Ct, ttomey for Defendant 4. -Please state whether or not Defendant has purchased, assumed, or in any other manner acquired any of the assets and/or liabilities of any corporation or entity (such corporations or entities being limited to those engaged in the mining, selling, manufacturing, marketing or distribution of asbestos-containing products.) If so, please state the following: (a) the name or description of each corporation, entity or assets acquired by Defendant, its state of incorporation and principal place of business, its date of incorporation, and the name of Defendant at the time of acquisition; (b) the manner by which each such corporation, entity, or interest therein, was acquired (e.g. merger, consolidation, change of name, stock sale, transfer or purchase of assets or product line); (c) the date of each such acquisition; (d) the state in which each such acquisition was effected; (e) the state law governing each such acquisition if specified by contract; (f) whether Defendant became legally responsible for the past torts of each such corporation or entity; (g) whether the acquisition concerned asbestos-containing products. Answer: See Answer to Interrogatory No. 3 above. 4.1 For each corporation, other than the answering Defendant, that has at any time in the past been involved in the placing of asbestos-containing products into the stream of commerce for which officers of the answering Defendant's corporation have also served as officers, directors or served in any managerial position while employed by the answering defendant, state: * (a) the name of the entity involved in the placing of asbestos products into the stream of commerce; (b) the manner in which the entity was involved in the placing of asbestos containing products into the stream of commerce (i.e., mining, milling, manufacturing, distributing, installing, rebranding, etc.); (c) the specific products placed into the stream of commerce by the entity, year by year and by brand or trade name; (d) the name, positions and a brief description of the responsibilities of the person or persons serving the answering Defendant and the entity simultaneously, including the positions held with the entity and with the answering Defendant. S: JHS \VB Asbestos Answers to lnterrogatones.doc -3- Answer: N/A, to this Defendant's knowledge. 5. Has Defendant ever engaged in the mining, manufacturing, selling, marketing, installation or distribution of asbestos-containing products? If so, please state the following: (a) The name of the company engaged in the activity (whether it is Defendant, Defendant's predecessor, Defendant's subsidiary or some other entity relatd to Defendant); (b) As to each product mined, manufactured, sold, marketed, installed or distributed, please state the following: (1) The trade or brand name (2) Its identification number (model, serial number, etc.). (3) The time period it was manufactured, mined, marketed, distributed, or sold. (4) Its physical description including color, general composition, and form. (5) A detailed description of its intended use and purpose. (6) A detailed description of the type of package in which it was sold, listing the dates of each type of package used, a physical description of the package, and a description of any printed material or trademarks that appear thereon. (7) The percent of asbestos which it contained. (8) The percent of asbestos by asbestos type (amosite, crocidolite, tremolite, anthophyllite, chrysotile). (c) The time period during which each of these products were on the market; (d) The material components/ingredients of each such product, giving specific or approximate percentage both by weight and by volume of each material component/ingredient (this interrogatory is not limited to the asbestos component of the product but seeks information on the nature, weight and volume of non-asbestos ingredients, as well) of each such product; (e) How each of these asbestos-containing product can be distinguished from those of competitors; (f) A description of the physical appearance of such product; (g) A detailed description of intended uses. Answer: Yes. 1. Fire Doors a. The Will-Burt Company. b. (1) Iron Fireman Manufacturing Co. (2) Unknown (3) Approximately 1966-1983 (4) Objection. Vague and ambiguous. Without waiving said objection, the doors were made of heavy cast iron and measured approximately 2' by 2\ (5) The door provided access to firing chamber of a boiler. S:'JHS'WB Asbestos-Answers to lnterrogatories.doc -4- (6) Objection. Vague. Without waiving said objection, the doors were packaged in a wooden crate. (7) Unknown; Believed to be de minimis. (8) Unknown c. Unknown start, ended in early 1980s. d. Objection. Unduly burdensome. Without waiving said objection, Will-Burt bought the castings, which were 99% cast iron, from a foundry and did machining on it. - e. "Iron Fireman" written on it. Unknown if logo on it. f. See Answer to (b)(4) above. g. See Answer to (b)(5) above. 2. Stoker Fan Assemblies a. The Will-Burt Company. b. (1) Iron Fireman Manufacturing Co. or The Will-Burt Company (2) 401 Series Pneumatic Spreader Stoker, including models: PS-75, PS-110, PS-160, PS-200, PS-300, and PS-400 (3) Approximately 1949-1983 (4) Objection. Vague. Without waiving said objection, green painted cast iron and steel. (5) Mechanical coal delivering machine and provides air to burn coal; approximately 12' to 14' in length. (6) Objection. Vague. Without waiving said objection, wooden crate. (7) Unknown. (8) Unknown c. Unknown. d. Objection. Unduly burdensome. Without waiving said objection, Will-Burt bought the castings, which were 99% cast iron, from a foundry and did machining on it. e. "Iron Fireman" written on it. Unknown if logo on it. f. See Answer to (b)(4) above. g. See Answer to (b)(5) above. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. 6. Does Defendant or any of its subsidiary companies claim that any patent would cover any product listed in answer to Interrogatory No. 5? If so, please state the following: S: JHS WB Asbestos Answers to InterTOgatories.doc -3- (a) The date of each patent; (b) The date same was issued; (c) The number of each patent application that is pending. Answer: Unknown. The two products were believed to be patented at one time, but patents have since expired. 7. Have any of the products listed above in answer to Interrogatory No. 5 been altered in chemicaTcomposition since first being marketed? If so, please state the following: (a) The trade name of each such product; (b) The date each such product was altered; (c) The nature of the alteration; (d) The reason for the alteration. Answer: Products were changed over time. The de minimis use of asbestos was eliminated in the early 1980's. 8. Have any of the asbestos-containing products listed in response to Interrogatory No. 5 ever been marketed, distributed, packaged, labeled, and/or sold by any other company or business? If so, please state the following: (a) The name and address of each such company. (b) The names and address of Defendant's distributors in Ohio, West Virginia, Pennsylvania and Kentucky since 1940. (c) The date of each sale. (d) The name of the person at each location with whom you primarily dealt. (e) A list of all asbestos-containing products that you sold to each location from 1945 to 1980. (f) The amount of each asbestos product sold to each location during this period. (g) Please identify all documents relating to this distributor for the particular location. Answer: Objection. Vague, ambiguous, irrelevant and unduly burdensome. Interrogatory asks if products sold by others, but then subset inquiries relate to sales by this defendant. Without waiving said objection, Defendant states that the stoker fan assemblies were sold by Iron Fireman Manufacturing Co. prior to Will-Burt purchasing certain assets of that company. As to all of the subset questions, unknown. S. JHS WB Asbestos'Answers to lmerrogatories.doc -6- As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By------ Jbhn H. Schaeffer (S.Ct^Ml874) Attorney for Defendant' 1/ 8.01 Has Defendant ever purchased asbestos-containing products from any other Defendant? Answer: Not to this Defendant's knowledge. 8.02 If the answer to the preceding Interrogatory is yes, please state the following: (a) name each Defendant from whom this Defendant purchased any asbestoscontaining product; (b) list each product purchased from each co-Defendant; (c) list the dates of each purchase of asbestos-containing products from each co- Defendant. Answer: N/A. See Answer to Interrogatory 8.01. 8.03 Has Defendant ever sold asbestos-containing products to any other Defendant? Answer: Not to this Defendant's knowledge. 8.04 If the answer to the preceding Interrogatory is yes, please state the following: (a) name each Defendant to whom this Defendant sold any asbestos-containing product; (b) list each product sold to each co-Defendant; (c) list the dates of each sale of asbestos-containing products to each co-Defendant. Answer: N/A. See Answer to Interrogatory 8.03. 8.05 Has Defendant engaged in the manufacture and/or sale and/or distribution and/or marketing and/or supply and/or purchase and/or use of non-asbestos-containing products for use in connection with temperatures above 125 Fahrenheit since 1930? If so, please state: (a) the date such activity began; (b) the years during which such activity took place; (c) the date when such activity was terminated; (d) if such activity was terminated, the reason(s) why; S: JUS WB Asbestos Answers to Interrogatories.doc -7- (e) the geographical area into which you claim the product(s) were sold, purchased, or used; (f) identify the organizational unit of Defendant so engaged; (g) the site(s) at which each such product was manufactured; (h) the material components of each such product, giving specific or approximate percentage both by weight and by volume of each material component of each such product; (i) the temperature ranges for which each product(s) was intended to be used; (j) the product's generic name; (k) the product's trade or brand name; (l) the container is which the product was shipped (i.e., paper bags, cardboard boxes) including the size and amount of the container; (m) a description of any logos, writing impressions or identifying markings which appeared on the product, as well as a description of the package used, the dates that type of package was used, and any logos, product names, trademarks, etc. which appeared on the package; (n) whether the words "non-asbestos" or "asbestos-free" were used on the package; (o) a detailed description of the intended method of preparation and application of the product; (p) a description of the physical appearance of the product, including size, shape, color and texture. Answer; Objection. Vague, Overbroad, Unduly burdensome, Irrelevant, and not reasonably calculated to lead to the discovery of admissible evidence. Without waiving said objection, Yes. Defendant manufactured and sold other stokers, space heaters and stoves that did not contain asbestos. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By:. Jphn H. Schaeffer (S.Ct ttomey for Defendan 1874) 8.06 Did Defendant ever market or distribute any asbestos-containing product manufactured in whole or in part by someone else? If so, please state the following for each product: (a) the name and address of the manufacturer; (b) the product's trade and brand name; (c) the organizational unit of Defendant who did so; (d) date(s) beginning, ending and during which the marketing or distributing took place; S:'JHS'.WB\Asbestos\Answers to lnterrogatories.doc -8- (e) whether the product was distributed through the same channels as those used for products manufactured by Defendant, and if not, please explain the exact channels of distribution; (f) identify all documents relating the marketing or distribution. Answer: Not to this Defendant's knowledge. 8.1 Does Defendant have reason to believe that any of the asbestos-containing products listed in response to Interrogatory No. 5 were used at any of the sites listed on Exhibit A, attached-hereto? If your answer is "yes", please state: (a) The basis of your answer. (b) Which of Defendant's asbestos-containing products listed in Interrogatory No. 5 were used at each job site listed on Exhibit A. Answer: Not to this Defendant's knowledge. 8.2 For each company or business that Defendant knows may have marketed, distributed, installed, and/or sold those products listed in response to Interrogatory No. 5, please state the following as to each job site listed on Exhibit A: (a) The name and address of each such company; (b) The date of each sale from Defendant to such other company; (c) The name of the person at each company with whom Defendant primarily dealt; (d) Names and quantities of the asbestos-containing products that you marketed, distributed, installed, and/or sold to each such company from 1950 to 1974. (e) Identify all documents relating to the sales to each such company. Answer: N/A. 8.3 If you do not know any business that may have marketed, distributed, installed, and/or sold the products listed in the response to Interrogatory No. 5 to any job sites listed on Exhibit A, please state the names and last known addresses of those companies who Defendant knows marketed, distributed, installed and/or sold their asbestos-containing products in Ohio from 1950-to 1974. For each of those companies, please state the following: (a) Name and address of each such company; (b) The dates of each sale from Defendant to such other company; (c) The name of the person at each other company with whom Defendant primarily dealt; (d) The names of the asbestos-containing products that Defendant marketed, distributed, and/or sold to each such company from 1950-1974. Answer: Objection. Overbroad, Unduly burdensome, Impossible to answer. S:'JHS'-WB\Asbestos\Answers to Intenogatories.doc -9- As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. 8.4 Does Defendant have records and/or any knowledge that reflects sales of their asbestoscontaining products to any of the sites listed on Exhibit A, attached hereto? If so, please state the following as to each job site listed on Exhibit A: (a) The names and last known addresses of those people with such knowledge. (b) The location of such records. Answer: Not to this Defendant's knowledge. 9. Did Defendant or any of Defendant's distributors, as listed in response to Interrogatory Nos. 8.1, 8.2, and/or 8.3 have sales representatives who specifically called on the sites listed on Exhibit A, attached hereto, from 1945 to 1975? If your response is yes, as to each site listed on Exhibit A, please state the following: (a) (b) (c) (d) (e) Answer: The names and last known address of each such representative and whether they are still employed by Defendant; The period of time they acted as your representative; Their general responsibility as to each facility; Whether that person is still alive; and Any documents relating, referring or pertaining thereto. Not to this Defendant's knowledge. 9.1 Identify all managers and sales personnel responsible for your sales or installation of any asbestos-containing products in Ohio from 1930 to the present and state their position, last known address and the local or regional office through which they were employed. Answer: Objection. Overbroad, unduly burdensome. Without waiving said objection, Walter Struckmeyer (deceased); Marla Allison, 1511 South Kohler Road, Orrville, OH 44667 Karen Boley, 10419 Smucker Road, Orrville, OH 44667 Tammy Butler, 1114 Whitegate Court, Sarasota, FL 34232 Randy Fath, unknown Harve Linder, 403 West Oak Street, Orrville, OH 44667 Donovan Milham, 1105 Heatherwood Lane, Orrville, OH 44667 Jeff Milligan, 1038 Valley Drive NW, North Canton, OH 44720 S: JHS''WB\Asbestos\Answers to Interrogatories.doc -10- Steve Steiner, 1842 Tammy Court, Orrville, OH 44667 Rod Webner, 202 E. Oak Street, Orrville, OH 44667 As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: H. Schaeffer (S.Ct. ttomey for Defendant 10. Did Defendant ever have any division or subsidiary engaged in the contract business of applying or removing asbestos-containing products? If so, please state: (a) The name of each subdivision; (b) The full address of the home office and the date such subdivision or subsidiary was engaged in this contracting business; and (c) Whether said division or subsidiary conducted such business at any of the sites listed on Exhibit A from 1940-1975? If so, please state the following as to each job site listed on Exhibit A; (1) The dates of such contracts; (2) The specific asbestos-containing products that were used or removed in each contract. Answer: No. 11. Did Defendant ever have any division or subsidiary engaged in the contract business of applying or removing asbestos-containing refractory? If so, please give the name of each subdivision, the full address of the home office and the date such subdivision or subsidiary was engaged in this contracting business. Answer: No. 12. ' Please identify by location and product produced, each plant in which products listed in your answer to Interrogatory No. 5 have been manufactured and/or assembled and the dates said plaints have been in operation. Answer: Both products produced at Plant 4, 240 W. Church Street, Orrville, OH (no longer property of Will-Burt). Plant was in operation on these products from unknown start date to the early 1980s. 13. Has Defendant, at any time, entered into a "rebranding" agreement with any other company, either as a buyer or a seller, concerning any asbestos-containing products and/or materials? If so, please state: S: JHS'W'B Asbestos Answers to Interrogatories.doc -11 - (a) The name of the company manufacturing the asbestos products under such agreement; (b) The trade name affixed to such products; (c) The periods of time covered by such agreement; (d) The volume (in dollars amounts) of each such transaction; (e) The purchaser of such products; (f) Does Defendant currently have in its possession any of the writings or contracts concerning such rebranding agreement? Answers- No. 13.1 Have you ever owned or operated a business or portion thereof which engaged in construction, erection or tear-out of furnaces, pipes, boilers, turbines, lehrs, ovens, kilns, etc.? If so, please state: (a) the name of said business; (b) the date of commencing business and cessation of business, if applicable; (c) type of construction or tear-out performed; (d) state whether said business installed or supplied asbestos-containing products on the furnaces, pipes, boilers, turbines, lehrs, etc., i.e., gaskets, pipecovering, block, cement, rope, cloth, clothes, etc., containing asbestos, asbestos pipe, board, etc.; (e) state the trade name and/or manufacturer of any asbestos-containing product which you installed or supplied to any site on Exhibit A. (f) provide the dates for the applicable construction, installation or tear-out project. Answer: Yes, as to construction. (a) The Wiil-Burt Company. (b) Unknown. (c) Construction of heat processing furnaces. (d) No. (e) N/A. (f) Unknown. 13.2 * Do you have within your custody, possession, or control any packages that presently or formerly packaged asbestos-containing products or were produced for the purpose of packaging asbestos-containing products contemporaneous with your manufacture sale or distribution of such asbestos-containing products? If so, provide the following: (a) a description of each such package; (b) the present location and custodian of each such package; (c) the date or approximate date on which each such package was produced. Answer: No. S:'JHS\WB'Asbestos'.Answers to lnterrogatories.doc - 12- 14. What is the name, address and job title of each individual who participated in the design and preparation of manufacturing specifications for each such product listed above in answer to Interrogatory No. 5? Answer: Objection. Overbroad, unduly burdensome. Without waiving said objection, Unknown. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: ----- ,----John H. Schaeffer (S.Ct. MMS74) y/ttomey for Defendant r 15. As to each product listed in response to Interrogatory No. 5, please describe how each product was to be cut, shaped, scribed, mixed and applied on the job. In answering this question, give particular reference as to whether or not the materials were to be sawed or cut on the job, blown into confined areas, mixed with water in a cement or paste. Answer: Objection. Vague and ambiguous. Without waiving said objection, Defendant states that for the fire doors, asbestos rope was to be placed in a groove around the door and pressed down. For the Stoker Fan Assemblies, a fans housing seal (Gasket PS 2485) and a bottom plate gasket (PS 2173) used asbestos rope and sheeting which was cut to size. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. 16. Based upon the material contents of the asbestos-containing products, the method of manufacturing, and the method of application, please state which products listed in Interrogatory No. 5 could be applied by a worker without creating a dust. Answer: Unknown. 17. Do any documents, including but not limited to, written memoranda, specifications, recommendations, blueprints or other written materials of any kind or character now exist relating to the design and preparation of the products listed in answer to Interrogatory No. 5? If so, please: S: JHS''WB'AsbeStos\Answers to Interrogatories.doc -13- (a) List each such written material or document; (b) Identify the person or persons presently in possession of each such document; (c) State where each such document is located. Answer: Yes. See attached. 18. Prior to releasing the products listed in Interrogatory No. 5 for sale and usage, were any tests (either animal or human) conducted on said products to determine potential health hazards involved-in the use of, exposure to, the materials and/or products? If so, please state: (a) The name of the products tested and the date of each test. (b) The name, address, and job classification of each individual who conducted such tests; (c) The results of such tests. Answer: Not to this Defendant's knowledge. 18.1 Prior to releasing any products for sale and usage (whether asbestos-containing or not), were any tests (either animal or human) conducted on said products to determine potential health hazards involved in the use of, or exposure to, the materials and/or products? If so, please state: (a) The name of the products tested and the date of each test. (b) The name, address, and job classification of each individual who conducted such tests; (c) The results of such tests. Answer: Objection. Overbroad, unduly burdensome, not reasonably calculated to lead to the discovery of admissible evidence. Without waiving said objection, Will-Burt tested all furnace products for carbon monoxide leaks prior to the product leaving the factory. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: --------------------Jbhn H. Schaeffer (S.CUKW41874) /Attorney for Defendant* (s 19. Does Defendant have or control any documents, including but not limited to, written memoranda, specifications, recommendations, blueprints or other written materials of any kind or character relating to the testing of the products listed in Interrogatory No. 5 hereinabove? S: JHS'WB Asbestos Answers to Interrogatories.doc -14- (a) Identify each such written material or document; (b) Identify each person who presently has possession of each such document; (c) State where each such document is located. Answer: No. 20. Were any design changes or modifications made as a result of such tests listed in answer to Interrogatory No. 18 hereinabove? If so, please state: (a) The trade name of the product changed or modified; (b) The nature of the change made and the date of such changes or modifications; (c) The name, address, and job classification of each person in charge of making a change. Answer: N/A. 21. After releasing for sale, distribution or marketing the products listed in answer to Interrogatory No. 5, did Defendant conduct any tests (either on animals or humans) to determine potential health hazards involved in the use of said materials and/or products? (a) The names of the products tested and the dates of said tests; (b) The name, address, and job classification of each person and/or agency conducting said tests; (c) The results of said tests; (d) Whether, as a result of any tests conducted, any products were removed from the market; (e) The names of all products removed from the market as a result of said tests. Answer: No. 22. Has defendant ever conducted or caused to be conducted any studies concerning the effects of the inhalation of asbestos dust and/or fibers on workers or other persons applying, using and/or working around any asbestos products manufactured, sold, distributed and/or relabeled for distribution by you or your predecessor? If so, please state: x (a) The dates and nature of such studies; (b) The names and addresses of persons conducting such studies; (c) The purpose of such studies; (d) Identify and list those persons to whom such reports were given and the date of such dissemination; (e) State any publication or other written dissemination of the results of such studies; (f) State the nature of any action to eliminate or minimize the inhalation of asbestos dust fibers; and (g) Attach a copy of reports based upon such studies. S:'JHS WB'Asbestos'Answers to Interrogatories.doc -15- Answer: No. 23. Before placing in the market the asbestos-containing products that Defendant, mined, manufactured, sold, marketed, installed or distributed on the market, did Defendant make or cause to be made, any studies to determine whether their asbestos-containing products would be hazardous to people? If so, please state: (a) The date of said studies; (b) What studies were done; and (c) The titles of each study. Answer: Not to this Defendant's knowledge. 24. Please state whether or not Defendant ever conducted or caused to be conducted any tests in the field (where asbestos-containing products were applied, removed or utilized) to determine the nature and extent of asbestos dust and/or fiber exposure to insulators, applicators, fellow employees, or other workers removing and/or tearing out asbestos-containing products, and/or other workers in the vicinity thereof? If so, please identify: (a) The date, place and nature of each and every test; (b) The particular asbestos-containing products to which each test applied; (c) The results of each test with particular reference to the number of asbestos fibers per cubic centimeter of air found at each site; and (d) The persons to whom the results said tests were given and the date of such dissemination. Answer: Not to this Defendant's knowledge. 25. Please state whether or not Defendant ever obtained any knowledge concerning the likelihood of asbestos being hazardous to human health. If so, please state: (a) * (b) (c) (d) (e) When Defendant first became aware of the hazardous potential of asbestos dust and asbestos fibers; The manner in which the Defendant, Defendant's predecessor, or Defendant's subsidiary companies first obtained this knowledge and became aware of said hazards and from what source this information was obtained; What information was disseminated within Defendant's company, or its subsidiary or predecessor regarding such adverse consequences or effects; Whether any such information is still maintained by Defendant or its subsidiary or predecessor in any written form. The name, address and job classification of the custodian of such information. Answer: Objection. Vague and ambiguous, overbroad and unduly burdensome. Without waiving said objection, Will-Burt states that at some unknown time, company officials likely gathered some information informally from news reports, magazine S:\JHS\WB\Asbestos\Answers to Interrogatories.doc -16- articles, and certainly from this litigation that asbestos is alleged to be hazardous to human health. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: 26. Please state when Defendant first became aware of the possible association between inhalation of asbestos dust and/or fibers and the contraction of asbestosis and cancers including, but not limited to gastrointestinal cancer, laryngeal cancer, renal cancer, lymphoma, lung cancer and mesothelioma. As to each disease or condition, please state the source of that information, including a description of all tests conducted relative to the possibility of such a relationship. Answer: Unknown. 27. Please identify all physicians, industrial hygienists, and other employees (including their names and addresses) who were employed, retained or otherwise engaged by Defendant for research, investigation or study concerning asbestos-related diseases. Answer: None/unknown. 28. As to each person who acted in a medical advisory capacity (as it relates in any way to asbestos) to Defendant, please list their name, the date individual acted in this capacity, and that person's current address and job title. Answer: N/A. 29. Please state if any medical officer or industrial hygienist or medical consultant ever made*at any time any recommendations and/or suggestions to Defendant pertaining the risks or hazards to persons involved in the manufacture or use of asbestos products and, if so, please state when, by whom or to whom such recommendations and/or suggestions were made and the substance of each recommendation. Answer: N/A. 30. Please state the scientific and/or medical periodicals to which Defendant, its medical department, research department, industrial hygiene divisions, engineering department or consulting physicians subscribed between 1945 and 1975. Answer: N/A. S:\JHS\WB'AsbestosXAnswers to Interrogatories.doc - 17- 30.1 Please state whether Defendant, its medical officer or industrial hygienist or medical consultant or physicians were ever involved in testing or receiving literature or correspondence from the Mellon Institute. Answer: N/A. 30.2 Has Defendant, or any engineer, industrial hygienist or physician in Defendant's employ, been a member in any professional group, trade group or any of the following groups: American Ceramic Society Asbestos Textile Institute National Insulation Manufacturers Association Thermal Insulation Manufacturers Association Quebec Asbestos Mining Association Asbestos Information Association Industrial Health Foundation Industrial Hygiene Foundation Iron and Steel Institute National Safety Council Refractories Institute Air Hygiene Foundation of America, Inc. Sprayed Mineral Fiber Association American Society of Mechanical Engineers If the answer is yes, state the following: (a) The name of the group or groups in which Defendant or individual(s) were members; (b) The name and position individual(s) within the Defendant, as defined, who were members; (c) The years Defendant or individual(s) were members of the groups; (d) Whether Defendant paid the individual(s) dues or membership fees or reimbursed the individual(s) for dues or membership fees in the group. Answer: Objection. Overbroad, unduly burdensome. Without waiving said objection, Will-Burt may have had employees who were members of ASME, but unable to identify those persons at this time. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: ltd&L& J/>hn H. Schaeffer (S.Ct ttomey for Defendani S:'JHSVVB'Asbestos'Ans\vers to Interrogatories.doc -18- 31. State in detail what test, if any, Defendant ever made with regard to the quantity, quality, or threshold limit values of asbestos dust, fibers or particles to which workers were exposed while using, working with and/or around, installing and/or applying your asbestoscontaining products. Answer: Objection. Overbroad, unduly burdensome. Without waiving said objection, Unknown. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By:_ i-ZW. J</hn H. Schaeffer (S.Ct. ttomey for Defendant 32. For each test described in Interrogatory No. 31, please give the name of the person conducting the test, the date of the test, and attach true copies of any documents, including but not limited to, reports, findings or memoranda concerning such tests or studies. Answer: Objection. Overbroad, unduly burdensome, not reasonably calculated to lead to the discovery of admissible evidence. Without waiving said objection, Unknown. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. John H. Schaeffer (S.Ct. (ttomey for Defendant 33. * Please state the year that Defendant was first advised of either threshold limit values or maximum allowable concentrations of both asbestos dust and total dust by the American Conference of Governmental Industrial Hygienists and state the name of the employee/official of the company receiving such advice. Answer: Unknown. 33.1 State whether Defendant at any time conducted, caused to be conducted, or had conducted on any job site, or at any of Defendant's plants or buildings, any air sampling, dust counts, dust observations, dust sampling tests or other activities to determine air quality. If your answer is in the affirmative, please indicate: S:\JHS''WB'Asbestos'Answers to lnterrogatories.doc -19- (a) the date of any such air samples, tests, or activities; (b) by whom such activities were performed; (c) where such activities were performed; (d) the results of any such activities. Answer: Objection. Overbroad and unduly burdensome. Without waiving said objection, Will-Burt states that it has tested and continues to test air quality routinely in compliance with OSHA standards, but not specifically for the presence of asbestos. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: ----------------------j/>hn H. Schaeffer (S.uM)41874) Attorney for Defendant * 34. Does Defendant maintain a library dealing with industrial hygiene, medicine, safety and engineering and/or research? If so, state: (a) The date each such library was established; (b) The locations of each library; (c) The name(s) of the librarian(s) since 1930; (d) List all journals subscribed to by you concerning asbestos, industrial hygiene, medicine, safety, and or/engineering; (e) List all books and articles dealing with asbestos and asbestos related-diseases and the date acquired. Answer: Not to this Defendant's knowledge. 35. Did Defendant in the 1920's or the 1930's commission, or participate in the arrangements with Metropolitan Life Insurance Company for studies at the Trudeau Foundation at Saranac Lake, New York, concerning the effect of inhalation or ingestion of asbestos fibers uponhuman and/or animal bodies. Answer: Not to this Defendant's knowledge. 36. When was Defendant first aware of reports of studies of the Trudeau Foundation at Saranac Lake, New York, entitled "Effects of the Inhalation of Asbestos Dust in the Lungs of Asbestos Worker" by A.J. Lanza, Assistant Medical Director published in the J. Public Health Report, Vol. 50, No. 1, dated-November 4, 1935 ("Lanza Report")? Answer: Never, to this Defendant's knowledge. S:'JHS\WB\Asbestos\Answers to Interrogatories.doc -20- 36.1 Did Defendant ever contract with Saranac Laboratories to study the hazards of any dust producing product manufactured by you (whether asbestos-containing or not)? If so, identify by date and author all documents concerning or any way related to such study. Answer: Not to this Defendant's knowledge. 36.2 Did Defendant ever contract with Saranac Laboratories to analyze dust or products? If so, identify by date and author all documents concerning or any way related to such analysis. Answers Not to this-Defendant's knowledge. 37. Please state whether Defendant at any time has been a member of any "trade organization" or "trade association" composed of other manufacturers, miners, distributors, and/or sellers of asbestos-containing products and, if so, please identify the name and address of each such association or organization, the dates of membership, and names of any publications issued or written by such association or organization. Answer: Not to this Defendant's knowledge. 38. With respect to each trade organization or association listed in answer to Interrogatory No. 37, please state whether the minutes of the group's meetings and any correspondence between the members of such groups concerning the hazards of asbestos exposure are available. Answer: N/A. 39. Please identify by name the technical and trade association periodicals to which Defendant subscribed, and state whether Defendant had knowledge of any articles being printed, or withheld from printing, in said periodicals pertaining to the potential hazards of asbestos. If so, please state the following: (a) The title of each such article; (b) The periodical in which each such article was published; (c) The date each article was published; - (d) A detailed explanation of the reason for withholding any such article for printing; (e) Produce documentation which refers, alludes or mentions articles which were withheld for publication. Answer: Objection. Overbroad, unduly burdensome. Without waiving said objection, Unknown. S:\JHS\WB\Asbestos\Answers to Interrogatorics.doc -21 - As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: ----- John H. Schaeffer (S.Ct. mmytjA) Attorney for Defendant V v 40. .Rlease state whether, prior to 1975, Defendant sponsored, or attended any meeting, seminar, conference, convention or legislative hearing where the subject of occupational health and exposure to asbestos was discussed and, if so, please state the date and place such meeting and the name and address of any speakers or participants. Answer: Not to this Defendant's knowledge. 41. As to each product listed in response to Interrogatory No. 5, please state whether Defendant, at any time, published and/or distributed any printed materials, including but not limited to brochures, pamphlets, catalogs, packagings or other written materials of any kind or character that contain any warnings, cautions, caveats or directions concerning the possible health effects of the products on a person. If so, please state as to each product: (a) (b) (c) (d) (e) (f) ((hg)) - (i) Answer: The name of each relevant product; The wording of each such warning; A description of each such printed material; The method used to distribute the warning to persons who are likely to use the products; The date each such warning was issued; Whether any warning accompanied any of your asbestos-containing products' sales literature, handout or pamphlets; Please attach a copy of the warning and the date said warning was issued; The name, address, and job classification of each person who presently has possession of the above-described documents; The name or names and addresses of the company who provided, produced, or manufactured the boxes or containers on which the warning appeared and dates these boxes with the warnings appeared. Unknown. 42. Has sales material been prepared by Defendant or its agents for purposes of marketing or advertising the asbestos products listed in answer to Interrogatory No. 5? If so, please state: (a) The name and address of each person or entity who prepared same; (b) The name, address and job title of each person who presently has possession of same; S:'JHS'>YVB'Asbesios'Answers to Intenogatories.doc -22- (c) The date same was prepared; (d) The media used to disseminate the sales material. Answer: Objection. Vague, ambiguous, overbroad, unduly burdensome. Without waiving said objection, Defendant believes that such material was prepared, but Defendant is no longer in possession of that material and is unable to answer the interrogatories. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By:. Jc/m H. Schaeffer (S.Ct. # omey for Defendant 74) 43. Has any written material of any kind or character been prepared by Defendant, Defendant's predecessor or any of Defendant's subsidiary companies or their agents indicating how the products listed in answer to Interrogatory No. 5 should be used or maintained by the ultimate user or those working in facilities or at job sites where the product was used, installed or removed, including, but not limited to, those sites listed on the job site list attached as Exhibit A? If so, please state the following: (a) The name, address and job classification of each person who prepared same; (b) The name, address and job classification of each person who presently has possession of same; (c) The dates and manner in which said material was distributed to purchasers of the products in answer to Interrogatory No. 5. Answer: See Answer to Interrogatory No. 42. 44. Was any written material of any kind prepared by Defendant and distributed to those individuals listed in response to Interrogatory No. 9? If so, please state the following: a (a) Identify the written material by content and date; (b) To whom it was delivered. Answer: Unknown. 45. Does Defendant contend that asbestos-containing products can be manufactured so as to eliminate all potential health, hazards to persons working with or around, installing or applying same? If so, please state the following: (a) The date that Defendant first determined that another product could be used in place of asbestos; S: JHS\WB\Asbestos\Answers to Imerrogatories.doc -23 - (b) The chemical of the substitute; (c) Whether the substitute is suitable for the purpose for which they are to be used; (d) Whether Defendant used the substitute for asbestos to 1971; (e) Whether Defendant ever used the substitute for asbestos for high or low heat insulation. Answer: Objection. Vague, ambiguous, overbroad. Without waiving said objection, Unknown. Will supplement. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. C_ JdLyM. By: Jonn H. Schaeffer (S.Ct. Attorney for Defendant 46. Did Defendant give any warnings to any individuals as the sites listed on Exhibit A, including any individuals who owned, operated, or managed the facilities at the sites listed on Exhibit A, regarding the potential health hazards of any product listed in response to Interrogatory No. 5. If yes, please state: (a) Name of person most knowledgeable about this communication. (b) Name of person at the sites listed on Exhibit A, attached hereto most knowledgeable about this communication. (c) Dates of each communication. (d) Contents of each communication. Answer: N/A. 47. Did any person prior to 1970, file a claim against any Workers' Compensation carrier covering Defendant alleging that he or she contracted a disease as a result of exposure to asbestos? If so, please state the following: (a) A list of each such claim by claimant's name, date filed, the caption and jurisdiction involved; (b) The disease alleged in each claim; (c) The brief summary of the disposition of each such claim; and (d) The name, address and job classification of the person or persons having custody of the records pertaining to each such claim. Answer: Not to this Defendant's knowledge. S:\JHS\WB\AsbestosVAnswers to Interrogatories.doc -24- 47.1 Please identify all documents concerning or in any way related to any decisions made by you to cease manufacturing asbestos-containing products. Answer: No such documents exist to this Defendant's knowledge. 47.2 Has any person or company from which you purchased asbestos-containing products ever issues a recall of their products or taken any action to take those products off the market after said products were in your possession? If so, provide: (a) (b) (c) Answer: the date of said recall; the name of the company which issued the recall; a copy of the recall. Not to this Defendant's knowledge. 47.3 State what action, if any, you have ever taken since 1930 to minimize or eliminate any risk of occupational disease or pneumoconiosis to those at any time engaged in the manufacture or production of asbestos-containing products. Answer: Objection. Vague, ambiguous, overbroad, unduly burdensome. Without waiving said objection, Defendant no longer possesses relevant information relating to that time period. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By:_ Jqhn H. Schaeffer (S.Ct. ttomey for Defendant 47.4 - State what action, if any, you have ever taken since 1930 to minimize or eliminate any risk of occupational disease or pneumoconiosis to those at any time engaged in the use, as distinguished from the manufacture, or exposed to the use of asbestos-containing or industrial insulation products or who were otherwise exposed to asbestos-containing or industrial insulation products. (a) describe such action; (b) state when such action was taken; (c) state what written material exists related to such action; (d) state the names, job titles and last known address of the individuals who undertook such actions. S:\JHS\WB\Asbestos\Answers to Interrogatories.doc -25- Answer: See Answer to Interrogatory No. 47.3. 48. Did Defendant receive notice prior to 1968 that any person was claiming injury or had sustained an abnormal x-ray reading as a result of using asbestos products manufactured, sold, installed, and/or distributed by Defendant? If so, please state: (a) The name and address of each claimant; (b) The date of notice of each claim; (c) A description of the claim; (d) The type of injuries allegedly sustained; (e) The name and address of each attorney representing the individuals making such claims; (f) The style and court number of each such claim; (g) The resolution of each such claim. Answer: Not to this Defendant's knowledge. 48.1 Describe the method by which you have maintained records concerning the manufacture, sale, supply, distribution, use, advertising, delivery and/or installation or tear-out of each asbestos-containing products. For each description provide the following: (a) (b) (c) (d) (e) Answer: each present and former company or corporate department, division or subdivision responsible for maintaining such records; the manner in which the records are kept (e.g., boxes, computer tape, microfilm, etc.); the inclusive dates of any such manufacture, sale, supply, distribution, use, advertising, delivery, and/or installation or tear-out which such record keeping system covers; the present location at which all such records are maintained; the identity of each person employed by you at any time from 1930 to the present who is or was responsible for the collection and maintenance of such records. Paper records are maintained in files. 48.2 State whether any records concerning the manufacture, sale, supply, distribution, advertising, delivery, use or installation or teat-out of asbestos-containing products have been destroyed or discarded and if so, indicate: (a) (b) Answer: the date and location of such destruction or discard; the custodian and location of such records prior to their destruction or discard and the identity of each employee, representative, official or agent who ordered, authorized or supervised such destruction or discard. Unknown. Si'JHS'WB'.AsbestosvAnswers to lnterrogatories.doc -26- 48.3 For all documents, other than invoices, work orders and/or purchase orders, which relate to matters relevant to all the preceding interrogatories: (a) Is there any kind of index for the documents? (b) How many pages is the index of documents? (c) How many documents are referred to in the index? (d) Is the index maintained in electronic format (i.e. database, word processing or other computerized format)? (e) What manner of electronic format is used? Answer: No such index exists. 48.4 For all invoices, work orders and/or purchase orders, which relate to matters relevant to all the preceding interrogatories: (a) Is there any kind of index for the documents? (b) How many pages is the index of documents? (c) How many documents are referred to in the index? (d) Is the index maintained in electronic format (i.e. database, word processing or other computerized format)? (e) What manner of electronic format is used? Answer: No such index exists. 49. Has Defendant obtained statements from any witnesses including Plaintiffs? If so, please: (a) Answer: list each witness who has given a statement and the name, address, and job title of each person having custody of any such statement. No. 50. Do you contend that Plaintiff/Decedent improperly used those products listed in response to Interrogatory No. 5? If so, please set forth in detail in what respect the product was improperly used. Answer: Not at this time. Will supplement. 51. As to the sites listed on Exhibit A, and as to each Plaintiff/Decedent, please state whether Defendant contends that there was any substance other than asbestos which contributed to or caused Plaintiff/Decedent's injuries. If your answer is yes, please state the following: (a) The facts upon which you rely; (b) The identity of the sources upon which you rely which substantiate these facts. S:'JHS\WB'Asbestos'Answers to Interrogatories.doc -27- Answer; Unknown at this time. Will supplement. 52. Would any respirator, mask or other breathing devices prevent inhalation of the asbestos dust and fibers contained in products listed in answer to Interrogatory No. 5? If so, state: (a) When the respirator was sold; (b) A detailed description of such respirator or other breathing devices, including name of manufacturer and model number; (e) The basis of your claim that such respirators or other breathing devices will prevent inhalation of such dust and fibers; (d) Identify any tests performed regarding the efficaciousness of such respirators and other breathing devices in preventing the inhalation of asbestos dust and fibers including date, title, author and number; (e) List all documents which mention, allude or refer to tests performed on breathing devices which prevented the inhalation of asbestos dust and/or fibers. Answer; Unknown at this time. Will supplement. 53. Does Defendant expect to call expert witnesses at the trial of this case? If so, please state the following: (a) Their identity and last known address; (b) The subject matter on which the expert is expected to testify; (c) The expert's specific conclusion and specific opinions and the specific basis therefore; (d) The expert's qualifications to render the opinions set forth above; (e) Whether any person identified in sub-paragraph (a) above has provided a report or other documentation to you, and if so, identify such document or report; (f) Identify all documents that you have provided to each person identified in response to sub-paragraph (a) above; and (g) Describe in detail the education and work history of, and identify any books, treaties, article, published and unpublished reports, studies or other scholarly works authorized by any individual identified in response to sub-paragraph (a) above. Alternatively, in lieu of said response, attach a copy of a resume or curriculum vitae and a list of publications to your answer. Answer: Unknown at this time. Will supplement. 54. Please state the name and last known address of each expert witness who is not retained or employed for that purpose who is an employee of Defendant and will render an opinion within his expertise at the time of trial. Answer: Objection. Vague and ambiguous. Without waiving said objection, None at this time, will supplement. S:\JHS\WB\Asbestos\Answers to Interrogatories.doc -28- As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. 55. .Does Defendant admit that service of process was properly had on it in these cases? If not, please state why. Answer: Objection. Vague and ambiguous. Without waiving said objection, Defendant states that at the time Defendant is answering these interrogatories, for all of the cases in which Defendant has been named and served, service of process is believed to be sufficient. However, this answer does not apply to cases in which Defendant has been named but not yet served as of this date. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By:_ JohA H. Schaeffer (S.Ct. #j Attorney for Defendant 55.1 For each and every affirmative defense asserted in Defendant's Answers to Plaintiffs' Complaint, or the cross-claims or counter-claims of any party against Defendant, state: (a) (b) (c) - (d) the facts upon which Defendant relies for each and every affirmative defense; each and every document which will be offered to prove each and every affirmative defense; and each and every witness who will testify in support of each and every affirmative defense. The substance and subject matter of the anticipated testimony of each witness identified in the preceding response. Answer: Unknown at this time. Will supplement. 56. Does Defendant have policies of insurance that might cover the claims that have been made by Plaintiffs herein? (a) If so, please list the name of each insurance carrier who may have coverage, the amount of such coverage, and the dates of each such policy. S:\JHS'WB'AsbestosAnswers to Interrogatories.doc -29- Answer: No insurance coverage has been identified at this time. Regarding any issue of self-insurance, Will-Burt states that 100% of the value of the business is pledged to bank liens. 56.1 Has Defendant ever been involved in any litigation concerning potential insurance coverage for asbestos products liability matters? If so, please state: (a) the case caption, court and date of filing of each case in which you have been involved. .(h) whether you were Plaintiff or Defendant; (c) a brief statement of issues; (d) identify by date, author and recipient(s), (including recipients of carbon copies) all documents listed as exhibits by either party in this litigation; (e) identify by deponent and date all individuals who were deposed in these cases; (f) identify by date, author and recipient(s) all documents that have been placed on a protective order in such litigation; (g) identify all expert witnesses retained for use at trial in any of the above litigation by name, address and telephone number. Answer: No. 57. Please state the name and address of each person who has knowledge of relevant facts regarding claims of defenses of this lawsuit. Answer: Objection. Vague, ambiguous, overbroad, and unduly burdensome. Without waiving said objection, Defendant has not yet identified such persons because Plaintiffs have failed to comply with the Case Management Order by attaching a product brochure to the Complaint. Defendant is unaware what the relevant facts, claims and defenses are in any of the cases with which it has been served to date. Will supplement. As to Objection: CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: 58. State the last date that Defendant sold, distributed, manufactured, installed, and/or otherwise placed asbestos-containing products into the stream of commerce. Answer: Objection. Vague, ambiguous, overbroad, unduly burdensome. Without waiving said objection, Upon the best information available to Defendant, early 1980s. As to Objection: S:\JHS\WB\Asbestos Answers to Interrogatories.doc -30- CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. By: C John H. Schaeffer (S.Ct.^f0j^l874) Attorney for Defendant The Will-Burt Company Sworn to and subscribed in my presence this ^ day of October, 2002. Notary Public, State of Ohto My Commission Expires June 6,2004 Respectfully submitted, CRITCHI 5LD, CRITCHFIELD & JOHNSTON, LTD. By:. Pe/gy J. Schmitz (S.Ct. #< J</nn H. Schaeffer (S. Ct. 0041874) Attorneys for Plaintiffs 225 North Market Street P.O. Box 599 Wooster, OH 44691 Phone: (330) 264-4444 Fax: (330) 263-9278 E-mail: schmitz@cci.com schaeffer@cci.com S: JHSUVB'Asbestos'Answers to Interrogatories.doc -31 - CERTIFICATE OF SERVICE I do hereby certify that a copy of the within Defendant The Will-Burt Company's Answers to Plaintiffs' Interrogatories was served upon Ladd Gibke, attorney for Plaintiffs, at Baron & Budd, 3102 Oak Lawn Avenue, Suite 1100, Dallas, TX 75219-4281,, by regular U.S. Mail and all other counsel via CLAD this S:\JHS\WB\Asbestos\Answers to lnterrogatories.doc -32- RICHARD I- RITTER JOHN R. WALTMAN JOHN C JOHNSTON III DANIEL II. PLl'MLY J. DOUGLAS DRL'SHAL KIM M. ROSE DANIEL L. MATHIE PEGGY J. SCHMITZ BONNIE C. DRUSHAL ROBERT C. BERRY SUSAN E. BAKER GARRETT M. ROACH STEVEN J. SHROCK DAVID J. WIGHAM CRITCHFIELD, CRITCHFIELD & JOHNSTON, LTD. ATTORNEYS AT LAW 225 NORTH MARKET STREET P.O. BOX 599 WOOSTER. OHIO 44691-0599 TELEPHONE: (330) 264-4444 FAX: (330) 263-9278 INTERNET: http://WWW.CCJ.COM October 3, 2002 Via Facsimile (214) 520-1181; Original by Mail MARK E. LEININGER AMY L. DEMLOW ROBERT C. GORMAN LAURA A. WAKEFIELD TIMOTHY B. PETTORINI ROGER D. PROPER. JR. JOHN C. THATCHER BARBARA A. KNAPIC MONICA L. MIYASHITA STEPHEN J. WALL JAMES R. NORRIS ELIZABETH KRIEDER WRIGHT (Of Counsel) LINCOLN OVIATT JOHN T. WIGHAM JOHN H. SCHAEFFER ^ Ladd Gibke, Esq. Baron & Budd 3102 Oak Lawn Avenue Suite 1100 Dallas, TX 75219 Re: All Baron & Budd Asbestos cases involving The Will-Burt Company Dear Mr. Gibke: The Will-Burt Company's Answers to Interrogatories and Responses to Requests for Production of Documents are enclosed in the mailed copy of this correspondence. Plaintiffs' Motion to Compel filed on September 30, 2002 is therefore moot, and we would ask that you withdraw it. JHS/ MEDINA MEDIA \ ROAD. SI ITF. Mm MEDIA X OHIO 44J?f. TEI.l>HOAH i Oi), 'J'-hJlH FAX i'-'ii, 72I.7M4 Mll.I.ERSBURCi !I- \XT IXCKSOA STREET MILLERSIH RO OHIO 44^4.,;.u . TFI.F.PHOA! i on, h->4.ti>5< FAX < Ml)' 474-44W '- UIIIHIOXI. -'Ill 40411 . f-S\ ."4(1. 4  C; ?-* > f" >- / '' r -i.*V^' >.'***^ ,*'*}?*. v * -; ..:' >' n s - ,- - '*i"V _-,v* '.. L XT---i \ PLAINTIFF'S EXHIBIT WBC-2 IN THE COMMON PLEAS COURT, CUYAHOGA COUNTY, OHIO IN RE: ALL BARON & BUDD CASES ) IN WHICH THE WILL-BURT ) COMPANY IS NAMED AS A ) DEFENDANT ) Plaintiffs, ) ) vs. ~ ) -) ) A-BEST PRODUCTS COMPANY, ET AL.) Defendants. ) ) ASBESTOS MASTER CASE NO. 073958 JUDGE HARRY A. HANNA THE WILL-BURT COMPANY'S RESPONSES TO PLAINTIFFS' REQUESTS FOR PRODUCTION OF DOCUMENTS REQUEST FOR PRODUCTION NO. 1: Please produce a true and correct copy of each photograph or picture of each asbestos-containing product that Defendant has ever mined, manufactured, sold, marketed, installed, and/or distributed. RESPONSE: See attached photographs. REQUEST FOR PRODUCTION NO. 2: Please produce a true and correct copy of each document which reflects sales of those asbestos-containing products listed in response to Interrogatory No. 5 to any of the -X job sites listed on Exhibit A, attached hereto. RESPONSE: Defendant does not possess any documents responsive to this request. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 3: Please produce a true and correct copy of each document which reflects sales of Defendant's asbestos-containing products to companies that may have distributed, packaged, labeled, and/or sold Defendant's asbestos-containing products. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 4: Please produce a true and correct copy of each record and/or contract which reflects the sales of Defendant's asbestos-containing products to any ofthe job sites listed on Exhibit A, attached hereto. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 5: Please produce a true and correct copy of each record and/or contract which reflects the sales of Defendant's asbestos-containing products to distributors and marketers who may have called on any of the job sites listed on Exhibit A, attached hereto. RESPONSE: Defendant does not possess any documents responsive to this request. S:'JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 6: Please produce a true and correct copy of each contract and/or work order that reflects contracts for Defendant to have asbestos-containing products installed or removed at any of the job sites listed on Exhibit A, attached hereto. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 7: Please produce a true and correct copy of each work order and contract that reflects contract business between Defendant and any of the job sites listed on Exhibit A, attached hereto, for the application of asbestos-containing products. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 8: Please produce a true and correct copy of each document relating to the design and preparation of the asbestos-containing products listed in Defendant's answer to Interrogatory No. 5. RESPONSE: See attached drawings. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 9: For each product listed in response to Interrogatory No. 5, please produce a copy of all tests that were conducted to determine any potential health hazards involved in its use or exposure (this Request for Production relates to Plaintiffs Interrogatory No. 18 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 10: Please produce a true and correct copy of all documents relating to the testing of any product which Defendant listed in response to Interrogatory No. 5 (this Request for Production relates to Plaintiffs' Interrogatory No. 19 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 11: Please produce a true and correct copy of all tests which Defendant conducted and/or has-nn its possession to determine potential health hazards involved in the use of or exposure to asbestos products listed in response to Interrogatory No. 5 (this Request for Production relates to Plaintiffs' Interrogatory No. 21 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 12: Please produce a true and correct copy of all studies which Defendant conducted or caused to be conducted concerning the effects of the inhalation of asbestos dust and/or fibers in workers or other persons using, working with and/or around, installing and/or applying any of the asbestos products mined, manufactured, sold, distributed, marketed, installed and/or relabeled for distribution by Defendant or Defendant's predecessor (this Request for Production relates to Plaintiffs' Interrogatory No. 22 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 13: Please produce a true and correct copy of all documents relating to any studies made or caused to be made by Defendant, to determine whether the asbestos-containing products mined, manufactured, sold, marketed, installed or distributed by Defendant or Defendant's predecessor would be hazardous to people (this Request for Production relates to Plaintiffs' Interrogatory No. 23 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. S:'JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 14: Please produce a true and correct copy of all tests in the field which Defendant conducted or caused to be conducted to determine the nature and extent of asbestos dust and/or fiber exposure to insulators, applicators, fellow employees or other workers removing and/or tearing out asbestos-containing products (this Request for Production relates to Plaintiffs' Interrogatory No. 24 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 15: Please produce a true and correct copy of each test which Defendant conducted or caused to be conducted regarding the quantity, quality, or threshold limit value of asbestos dust, fibers, and/or particles to which workers were exposed while using, working with and/or around, installing and/or applying Defendant's asbestos-containing products (this Request for Production relates to Plaintiffs' Interrogatory No. 31 previously propounded to Defendant in this litigation). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 16: For each product listed in response to Interrogatory No. 5, please produce a true and correct copy of all promotional or sales material including, but not limited to, S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC brochures, pamphlets, catalogs, packaging, or other written materials of any kind or character. RESPONSE: See attached materials. REQUEST FOR PRODUCTION NO. 17: Please produce a true and correct copy of all warnings, cautions, caveats or directions concerning the possible health effects of the products listed in response to Interrogatory No. 5 (this Request for Production relates to Plaintiffs' Interrogatory No. 41 previously propounded to Defendant). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 18: Please produce a true and correct copy of all written materials prepared by Defendant or Defendant's predecessors or any of Defendant's subsidiaries indicating how the products listed in response to Interrogatory No. 5 should be used or maintained by the ultimate user (this Request for Production relates to Plaintiffs' Interrogatory No. 43 previously-propounded to Defendant). RESPONSE: Defendant does not possess any documents responsive to this request. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 19: Please produce a true and correct copy of all notices received by Defendant prior to 1968 that any person was claiming injury or had sustained an abnormal x-ray reading as a result of using asbestos-containing products mined, manufactured, sold, marketed, installed, or distributed by Defendant (this Request for Production relates to Plaintiffs Interrogatory No. 48 previously propounded to Defendant). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 20: Please produce a true and correct copy of statements from all people with knowledge of relevant facts to this lawsuit. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 21: Please produce a true and correct copy of all documents which mention, allude or refer to tests performed on breathing devices to prevent the inhalation of asbestos dust and/or fibers (this Request for Production relates to Plaintiffs' Interrogatory No. 52 previously propounded to Defendant). RESPONSE: Defendant does not possess any documents responsive to this request. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 22: Please produce a true and correct copy of all reports by experts that Defendant may call upon at the trial of this case (this Request for Production relates to Plaintiffs' Interrogatory No. 53 previously propounded to Defendant). RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 23: Please produce a true and correct copy of all policies of insurance under which any person carrying on an insurance business may be liable to satisfy part or all of a judgment which may be entered in the action or to indemnify or reimburse for payments made to satisfy the judgment. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 24: Please produce a true and correct copy of all notices received by Defendant prior to 1968 that any person was claiming an injury or had sustained an abnormal x-ray reading as-*a result of using asbestos-containing products, regardless of the manufacturer or seller of the products. RESPONSE: Defendant does not possess any documents responsive to this request. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 25: Please produce a true and correct copy of all documents, correspondence or communications pertaining to all marketing, sales, negotiations, delivery or distribution of all of your asbestos-containing or industrial insulation products to all Defendants to this lawsuit other than the answering Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 26: Please produce a true and correct copy of all documents memorializing or referring, relating or pertaining to communications or correspondence among and/or between your officers, director, agents, representatives, employees or consultants and any employer, purchaser or user of your asbestos-containing products, its officers, directors, agents, representatives, employees or consultants which in any way relates, refers or pertains to asbestos, asbestos-containing products, pneumoconiosis, asbestos-related illness, injury or disease, dust or workplace health or safety. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 27: Please produce a true and correct copy of all annual reports of Defendant to employees or stockholders for the years 1960 through 1969 and for the past five years. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC RESPONSE: Objection. Overbroad, unduly burdensome, not reasonably calculated to lead to the discovery of admissible evidence. REQUEST FOR PRODUCTION NO. 28: Please produce the originals or true and correct copies of all safety or health manuals, pamphlets or brochures issued by Defendant between 1930 and the present and any documents relating to whom said manuals were issued. RESPONSE: Objection. Overbroad, unduly burdensome. REQUEST FOR PRODUCTION NO. 29: Please produce a true and correct copy of all safe workplace practices manuals, pamphlets or brochures issued by Defendant from 1900 through the present. RESPONSE: Objection. Overbroad, unduly burdensome. REQUEST FOR PRODUCTION NO. 30: Please produce a true and correct copy of all documents referring, relating or pertaining to the Industrial Health Foundation or the Industrial Hygiene Foundation in the custody, possession or control of Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. S:'JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 31: Please produce a true and correct copy of all documents referring, relating or pertaining to the Trudeau Institute and Saranac Lake Laboratory in the custody, possession or control of Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 32: Please produce a true and correct copy of all documents referring, relating or pertaining to the Quebec Asbestos Mining Association (QAMA) in the custody, possession or control of Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 33: Please produce a true and correct copy of all documents referring, relating or pertaining to the National Insulation Manufacturers Association (NIMA) in the custody, possession*or control of Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. S: JHSYVVB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 34: Please produce a true and correct copy of all documents referring, relating or pertaining to the Thermal Insulation Manufacturers Association (TIMA) in the custody, possession or control of Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 35: Please produce a true and correct copy of all documents relating to any conferences, symposia, or meetings attended by any of your officers, physicians, agents, servants, employees or consultants which in any way considered, discussed, reviewed or made recommendations concerning asbestos-related illness, injury or disease; pneumoconiosis; occupational lung disease; dust; industrial hygiene; and/or worker or workplace health or safety. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 36: Please produce a true and correct copy of all documents to and/or from Defendant and any person, organization, institution, laboratory, foundation, corporation, entity, board or consultants which refer, relate or pertain to air quality studies, dust counts or dust studies, alleged maximum allowable concentrations (MAC), alleged threshold limit S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC values (TLV) or protection of your employees or any other employees or persons from actual or alleged hazards associated with asbestos exposure. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 37: Please produce a true and correct copy of all documents to and/or from Defendant and any person, organization, institution, laboratory, foundation, corporation, entity, board or consultants which refer, relate or pertain to air quality studies, dust counts or dust studies, alleged maximum allowable concentrations (MAC), alleged threshold limit values (TLV) or protection of your employees or any other employees or persons. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 38: Please produce a true and correct copy of all documents to and/or from Defendant involving any physician, industrial hygienist or public health specialist which in any way relates, refers or pertains to asbestos-related injury, illness or disease, pneumoconiosis, occupational lung disease, dust, industrial hygiene or worker or workplace health or safety. RESPONSE: Defendant does not possess any documents responsive to this request. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 39: Please produce a true and correct copy of all photographs, pictures, prints or any visual depiction at any time generated showing workers or any person or persons installing, applying, removing or in any manner handling or utilizing an asbestoscontaining product at any time manufactured, sold or distributed by Defendant. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 40: Please produce a true and correct copy of all documents pertaining to the acquisition, purchase or sale by Defendant of any asbestos-containing product manufacturing facility or asbestos-containing product or product line. RESPONSE: Defendant does not possess any documents responsive to this request. REQUEST FOR PRODUCTION NO. 41: Please produce a true and correct copy of all documents pertaining to the acquisition, purchase or sale by Defendant of any asbestos-containing product from any other Defendant in this case or to any other Defendant in this case. RESPONSE: Defendant does not possess any documents responsive to this request. S:'JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC REQUEST FOR PRODUCTION NO. 42: For each and every affirmative defense asserted in Defendant's Answer to Plaintiffs' Complaint, the cross-claims or counter-claims of any party against Defendant, produce each and every document which will be offered to prove each and every affirmative defense. For each and every allegation of Defendant in cross-claims(s) asserted by Defendant in this litigation, produce each and every document which will be offered to prove each and every allegation in Defendant's cross-claims(s). RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 43: Please produce a true and correct copy of every transcript of testimony of each witness Defendant intends to call at trial. RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. .* REQUEST FOR PRODUCTION NO. 44: Please produce a true and correct copy of each and every medical record in the custody, possession or control of Defendant relating to Plaintiffs in this case other than those medical records produced by Plaintiffs and provided to Defendants in this case. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 45: Please produce a true and correct copy of each and every document or other tangible item upon which Defendant will rely for impeachment or rebuttal purposes in the trial of this matter. RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 46: Please produce a true and correct copy of each and every document, recording or other tangible item that constitutes in whole or in part a statement by Plaintiffs or a statement by any of Plaintiffs' witnesses in this matter. RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 47: Please produce a true and correct copy of each and every photograph, videotape recording or other tangible item that is a photographic representation of Plaintiffs in this matter. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 48; Please produce a true and correct copy of all work records or other tangible items relating to Plaintiffs or their employers. RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 49: Please produce a true and correct copy of every transcript, affidavit or sworn statement by each and every witness called by Defendant in any litigation related to insurance that may cover the claims in this case. RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. * REQUEST FOR PRODUCTION NO. 50: For each document for which any privilege is asserted, produce an index containing the following information: (a) Author of document; (b) Position, title or affiliation of author; S:'JHS\WB\ASBESTOS\RSPONSES TO RFP.DOC (c) Date of document; (d) Each recipient of the document; (e) The position, title or affiliation of each recipient of the document; (f) The subject matter of the document with sufficient specificity to determine the matters discussed therein; and (g) The privilege(s) asserted. RESPONSE: Defendant does not possess any documents responsive to this request at this time. Will supplement. REQUEST FOR PRODUCTION NO. 51: If Defendant claims that the documents are too voluminous to produce as requested, provide the following: (a) The numerical amount of documents responsive to requests herein; (b) The method of storage of documents responsive to requests herein; (c) The method of organization of documents responsive to requests herein; (d) The location of documents responsive to requests herein; (e) Whether there is an index or indices, lists, inventories, or other such information for records responsive to requests herein; -* (f) If there is an index, indices, lists, inventories or other such information for records responsive to requests herein, whether such index, indices, lists, inventories or other such information for records responsive herein is printed, or electronically stored, (i.e., listed in a computer, imaged, part of a database, etc.); (g) If the index, indices, lists, inventories or other such information for records responsive to requests herein, whether such index, indices, lists, inventories or other such information for records responsive herein is electronically stored, (i.e. listed in a computer, imaged, part of a database. S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC etc.), the method of such storage and software used to create and/or maintain said index, indices, lists, inventories or other such information for records responsive to requests herein, whether such index, indices, lists, inventories or other such information for records responsive herein. RESPONSE: n/a. REQUEST FOR PRODUCTION NO. 52; If any, answer to requests herein is subject to an ongoing investigation or continuing discovery, provide the following information: (a) The person or persons responsible for the ongoing investigation or continuing discovery; (b) The means or methods used or being used for the ongoing investigation or continuing discovery; (c) The beginning date of such ongoing investigation or continuing discovery. Respectfully submitted, CRITCHFjygLD, CRITCHFIELD & JOHNSTON, LTD. By: d)bL^=fJ. Peggy J. Schmitz J/hn H. Schaeffer v Attorneys for Plaintiffs 225 North Market Street P.O. Box 599 Wooster, OH 44691 Phone: (330) 264-4444 Fax: (330) 263-9278 E-mail: schmitz@cci .com schaeffer@,cci .com S:\JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC CERTIFICATE OF SERVICE I do hereby certify that a copy of the within Defendant The Will-Burt Company's Responses to Plaintiffs' Requests for Production of Documents was served upon Ladd Gibke, attorney for Plaintiffs, at Baron & Budd, 3102 Oak Lawn Avenue, Suite 1100, Dallas, TX 75219-4281,, by regular U.S. Mail and all other counsel via CLAD this day of October, 2002. S:'-JHS\WB\ASBESTOS\RESPONSES TO RFP.DOC -- 4h *n3-' I? 13 14 lb 15 17 WwEing purchase requisition psivrir " *' niivcp /? // <g#C- ; d^L-U6/s StM~ 1 yyrr* 0A\~~B OtfAiz. CODE NOPART NO. g<? 6 S5 / 7 DESCRIPTION- Qfafe-- h<3 .^<0H9.<Sr (*'/<*sl`--'JLlUi. . , M-f* -- gT'" Tk ermoq jqgg I^Y\ifT<Zc#__/V>flp.e . Ji.P. /r,____ MJrtJL o' z -Vz ~f^u in' /uL&- T t y /Z Oe n S( r* c-cfc^- $7*' . (NV. CODE '/&'yU.:CLASS - -------------34^.-c-(?^-acct.no..<^_,-- NO- -DEPT. NO- FOR RESALE.:____ ,_______ I I __ crNOT FOR RESALE- .2 WEIGHT __ !________ UNI r OF .MEASURE. -/4Uy244.j_MAXIMUM. MULTIPLE . UNITS s-^-9i .MINIMUM. pr. J. f. iN VENDOR'S NAME 1&B7.------- :------------ VENOORS PART NO. F.O. B. POINT $/?J-S..-C.zj. A.A 6~0>1t FREIGHT ALLOWED ON TERMS m SHIP VIA LEAD TIME TRANSIT TIME ECONOMIC PRICE WKT.ex.c: P>V.y. "#IO- ? -ov h-t -o'-1 ?? '6 ^<4- S t st/'Vn) H* \i UUCCiif Lh aAUUscL-- cL5St>V. jtjJ'y $L tylAAU - JjlUxur/rtCgSL ^ REQUISITION RECORD PURCHASE RECORD J VN0 CODE ' DATE TOTAL QUANTITY OATS QUANTITY DELIVERY SCHEDULE CATE | QUANTITY DATE QUANTITY I "ATE P.0. NO. PU. UNIT APP. PRICE d//P PlCTrt>V' W ^'pfyir JL -jar#* V ^ /T- 7/<? d/y.1 -'V 7/oVc / il `^>T3 C . *^2! w m? /. ztffl y KL StrALC / (( *//?* %r 'Vt> Sup' ^/O' /ofJI2L- Bov /Pin> 1 '4 PL S21 Shi/ it* - j 1 <1 iSu _ ''rA?72L. A. /e -R- / CLJS7 Apt* / T'pfa 0 t/CuP jT* >S 4/-' /''C. Cp?[ ,,(. r#/^ < /y4 '> ^'4-' :. y .//* hio/rS Sod ^ 56^'; 'fetjti Suo!\ 1 j j~~i(jr"> d?A !5- o' fall'll. 5al- <y,yio\ ^4 4 $ /* L cvj- ____________ i3 71J?A i1 1! 4_________ _J Ahi&fe JL fL 73'M tfrtelr ' 0 c a =% p-p rA .! ' _y ! C$4-t&4\ finite Sod. ty/o/$n soq' fen soo' ;L . see1 \skil&\ sod 1 \ /'u^yl^Ct- Z} ?S*> '/c1' ; ... | ,/ !^y/^r 9 M - tiu ; /fi i w*h x\/rp t-________ 7 X$#/a/ '>f.oiS' \) a 1 * V ~ ^ /J J V __ _ 3V3-j m. Ifhihi oo' fy/ts See ' &Z^LJL. h'HWlszP ff- rrv.-.L 4.1aJ34 Lhl n, 7 ill I inr: ; ,,/? izn- 5oc Of AMR 1 7 1986 7 8 9 10 .1 1 gctf 3.n$! -OHGr. a 7/^fVELING PURCHASE REQUISITION *' ' ' *?+*+- hiivfp A 0vPr'A'f-, -Q-(\~ S code i,opart no. *2 6 Ss / 7 DESCRIPTION. ho /,<9Hger ^ " T~h e.v mo<~j}qG__f/n \.j~ T.C dj.__$,.Q.p.<2.-r.Jri __ 3/.PJ.U.. ____ ^/m - p T*. IHV. CODE CLASS _ AS-/-^7-p-^C~p4^PC I1!' (ut*. # ^ |j = ^7? U NO- D&v s) f~i J3EPT. NO._ JT> f.. FOR RESALE- JL"crJ NOT FOR RESALE. WEIGHT rTUNT OP . y/ -i jfcjr MEASURE,/.Af,? ^2^, MAXIMUM /r &?/ MULTIPLE _ UNITS ^MINIMUM. -%J7 S *8 VENDOR'S NAME VENDOR'S PART NO. F.O. B. POINT l&MT*------------------ JaHfiSZ rtst/Vi-'/t-t-e Sffi.S Cats. 1 ft?, P, /A UAStnSJlZ. a, /jA-% '.fiC.li: 3 CSV H H . K C, ! ,1 Iki, SvjQfc *h <9?La^U' jtAUXjn~p&.- FREIGHT ALLOWED ON TERMS SHIP VIA LFAO TIME TRANSIT ECONOMIC TIME QUANTITY TeX c:mAIXlSL !>v*y9. b-t '#io- > ^ ?"r, " / WKS 'OH DATE TOTAL QUANTITY HZ.fiz- Vy V* 2/n: Vif Sr>s> X. Prt) P,OV $02* m1* r./" REQUIS1TION RECORD DELIVERY SCHEDULE DATE QUANTITY | CATE | QUANTITY DATE . iUh__m_1 CiAL x \i Li (n?' QUANTITY to -| 7 ; /<j \ 6Tn- rt 4- 3 Cf-r^ l, __ t0/1z, -^C2rt> fin SZCuJe* - f* +*<*f* ,___________-_R____j7* C.'> -1C 1 <J7,, J PURCHASE RECORD UNIT PRICE vJS&fA m LiMl /,?* %/c j WTO 9tr7LJC cS CPS? S.rA ki '#(/> o 6 CCS Sc r Sf/ z: 7J3?7 So.Q'' 4C-A-h\ rC--orlr/` 'bjliL r)C.r tfiCCScc'' ^ WSS5ESS. ? 2' miLasaa^. 17 <___________ ____________ 1 s^2.^irfi-Lf: 6bo; % 5bc'HS-^c**Lk jfps '$hU$6 3oO' fash 500' J2 j A*h).i.U.!*\, scet,eS' sfzils\ s cr, #C %22lzU2jlteC~5S074s1~zZ/Is^slliI. Sc* 'Iffata soo' V(/gj soe' j /. jjj- Uk 1 & ' -3VC3 3 1 S~sP 731 op yfrff -,./ n\^.^,...Cb !^CJr .y?M 5Slflcn:. --'iUr %27' S2T' r' .i <... :_ IH _1 : J \^Sftl-l'-T'rQ0 v*rg;y3 CCN NO : `  Jt SCLtf an* l 7/^SSVeling PURCHASE REQUISITION ** ' . * -Tyrr*' "i - Riivpp f/? " . yJZcZ'S'6/e Q~(\ 'Q&AfcL CODE NOPART NO. DESCRIPTION. 2- " Tk ev moq )qSS no /anger qy/a\ .p_e_. <T 5 / 7 BJ7. r p y /z INV. CODE CLASS . --3suHi - c^chr^ * 5, / r^ fftl,____ AAfCt.eCr.T,. wNnO. _______ LIL^ ! TOR RESALE_______ _____________1-------- 1 ^ ------- UNIT OF MEASURE NOT FOR RESALE_________ U WEIGHT MULTIPLE _ UNITS ,,DEPT. N0,_ . TT MAXIMUM rjr-zi-9tf ^MINIMUM. 37. f. 7 VENDOR'S NAME VENDOR'S PART NO. F. 0. B. POINT FREIGHT ALLOWED ON TERMS SHIP VIA LEAD TIME TRANSIT TIME ECONOMIC ^S2a------- :------------Jau^i rt/iArsjt-t-e S#LS />? i. /W,P/y\i4R.boLteL ^ So of yly?-Lv f,, 3 atShrti u h*Ct h zPIiI*M*-' s. M&L. t g x ...C n Vu?, '0*10- WK^-oy 2-1 -w L-.iO~ OATE 7/6 r IulUT!-raC* REQUISITION RECORD TOTAL QUANTITY 3/vu-/ DELIVERY 5CHEOOLC DATE 6op/e QUANTITY y , 7%' PURCHASE RECORD UNIT PRICE m tV *' S'j* </ *- Vi .!3t> %*> V/(, ^ trO ' to s' Sic jL. al fkr '1\~u-` An S&UJu - Tz w w ty c ^o/7.i 5oc/j Z'jf S60 i 36 ?<&L J- K. 7Z -^-{7* jK /T'l" '*- A>^4'<.' ' y u&m uL l bfr~7 9C lS / CUS7 ml {p 7~T)0> 0 7 c 7~ L & Vfck/ M' L3 ?.33?7 SoO ' %-/lu M /- J W'lL Jkydlmi: i Mf/! ^ /; /?! t/y - Cj_!7 !_______________ ......................... .................. 7fyik 60S Tuf: Miojio 300' 4/zI/sr see1 Skj/&1 S o& fU91 z'k/ i1 SI eai1 5zk7sk1 z S_ 1 sot)' ^ths Sof [, .tor tem $0'!1_-..a,.: m/x\Xf?si>y \ls Wip yJdYjCfru I r^T!? fm'AMmv! )'e\<7 r r-- H 7Wio >bv43T ! y.r' *r*s. l- iJL*- f>/n}S'S11f%< /* 1 &LUL i H 1n | FORM -J ct-.v mu : : _______ gcu , IBBBBBBBBBBBBBBBBBBMII a 7/^$WeL1NG PURCHASE requisition r.iyfp fA " . d&pA~t/-~x7rM-.--&rtWrfc. _COOE NO .PART NO _*2 6 6s~/7 DESCRIPTION.. _______________.______________ KlO io . a~" r/ieTmQq)qSg____ f t e <$______________ _______________________________________ ~ J=-Tr. lc / n' ^ f y y /Z D&n s) f-z. INV. COOC CLASS _ lrrj FOR RESALE_______.___________ NOT FOR RESALE s 57 WEIGHT , -, , I NO, MUCNASirI/RF6 MMUULLTTIIPPLLEE _ UNITS ..DEPT. NO.. XA. tTt .MAXIMUM. ^7' ..MM!IKNIMUM. ~l VENDOR'S NAME V6N00R S PART NO. F. 0. B. POINT FREIGHT ALLOWEO ON TERMS SHIP VIA LFAO TIME TRANSIT ECONOMIC TIME QUANTITY J \7*MW.< ^/iV/LLlg Sffi-S C-qZS yd/y\ md.1Xl te.x.C. *io- .?-ov 9-1 6: / - ` 5 H Jkf l K A to Ci 1} ft Si SI u-t> 4l y?i<UU- DATE UkZ-- 7/<? 4iy Viz nil- TOTAL QUANTITY s/>* Js Jj6f/kiZ / A-A; 7/Z6 S'cFp ' ^/(g-T IZoZ' i 7</i -2. - REQUIS1TI0N RECORD DELIVERY SCHEDULE \JteUL QUANTITY ^QfJTWv - /Z- Zc ^4' Ci6T> 5ZZ 7 I 4 /<j j ofrT r fr Z. z -rry^ 2J=_ SZGuJtt - ^J<i^44a /* 9t7o 5oc/ s^ '/sf 5c-o cz A >' Z--Fj v:. 1- PURCHASE RECORD UNIT PRICE smM v & rim /fg* 6/ *4>V *&7 k "A#6> o A Vz/ y.//- %/J Vi. !, m/A wtru -.-' r,tj v 5cor '9, /<' /?-C _______ _________{C4-1&4 . /TO 5oa %f oo*-(s*0i(i?ttUi. ^iio/go Soc''fasti 500* 7S/gf WASjmE: Zi.\2*%&yx. e. /? __JJ____ IT" 3P' V a. 4lzij$\ -I- SSCCOG1 Sskki(fk!c\\ SsOS'1 yl|l2lz2j$3 506* Z(zs}u SOf( vl?hh3 soe' Vtjss See [ m^wm 52:7' Aufl SZT Sf-r'Y c=j_^l_/2J .. ^7 MA lAta J.!3V^3T ! ,p_-Zicj* 737WI jf.# .'l*Arr,y'/tiS^ITTI I J ui. ,./-7 I nu ; - PART NUMBER OH t o u t m>. ". -- * !M 1.6 17 !8 H| 20 sets an ata 7/9jftfAVELING PURCHASE REQUISITION 2 75" ' ,> '3 *77 * ~V - J. </C ,r,,..,L./ BUYER. .CODE noPART NO.. S2 6 6s~~/ 7 DESCRIPTION. Tlaymo^jqS.1; U^er cw<*\ j. l)___ m/m ~ p T*. *0 \=> iNV. CODE CLASS _ 7^^z {SOS'- ^-v4c^y in' *>.. #"1 ** ^ y /J Zi/i ST# Cx^ferv, * 5??' .. . |iLii--41-0 NOi Oen s) f-L .DEPT. NO.. XL FOR RESALE:.__________ I__ I -c NOT FOR RESALE- Eh WEIGHT _L unit or y _ /V UC1CIIPC / y. J 7,jt " MAXIMUM A.?.'...MULTIPLE _ UNITS '___________________________________ MINIMUM. VENDOR'S NAME VENOOR'S PART NO. F. 0. B. POINT FREIGHT ALLOWED ON TERMS SHIP VIA LFAO TIME TRANSIT TIME ECONOMIC PRICE S/?LS c-g.ts. 2 &* c: ZX&. Ki? -o*y V+ /:5'o!?7 -6 O1-.: S5 HC/Vn*Ifi Kt*Ca| hai+t- s, 4* - Jj^UxLy-srcroA DATE TOTAL QUANTITY SI Sca.-j^L 3A//l ./> / " Vo* Vi Caro V/6. %Vi.? f/is- ScrZ>' REQUISITION RECORD DELIVERY SCHEDULE DATE QUANTITY aw *BC^**^ y. ^ SCro' /< 7T(7Z` j'f <! '&* szaJtf -c* ,-=r7772 2- *z -1-7* /5.j '> PURCHASE RECORD UNIT PRICE vm iscrr? /,?* /.Hr79C cS / l / l&S? '&L 7c 2, &A&&/ *y/J SIVto/7l 3 5oc> ' 560 St/O1 miMi%, rT; OO Sou i ^ 5c-o 5co 1 /<? /r, ^ 7^' u. ij zSy^ui- yjw v.f&teir' 'oUL^MZa. 7.// 6oaV7nf \ 5'oo^A'A^^lt<kS Af &lltJoh </V)/ Ifrttft I| 5*?0/70/9 ^ ! itei/w Soo^ K/zf/d i 4i f? I 40 9?o~7>> Y-Cir l ^/?3 y//>J j "Sff ' -agg', %ltu fol-fl S2t7 ' y~>A. 1 /? : --i--~ t--' jy<i3 3 n< >/i;gLT'7T?li a-ote>-r rr* )~) i"1 ' '! %nc'atir:-' \ p- \r ` i| . I INVENTORY CLASS I VSHOtfP Q fl ACCOUNT NUMBER ~~ 44 1 ^ F`00 * - j/i ' ' fz-hfa. ' 6 ? - rs y>e'^' - <o --A /// /7eMf__________________________________ i t --1i---------------------------------------------------------- 4* &c// aqai~e,H&. 7/ ps 2?r*r!*~0` 14 IS I.B 17 18 IS 20 7!' ?2 ELING PURCHASE REQUISITION trvfrf- i v-" - BU VFB L/L '' Qtf&fcj _COOE HO,. .PART NO, DESCRIPTION. ^ --ho o.va\ *Vr>Hu 9. " Tk er m ocj ]q &. /3v\ s j~Lt <S d? p e } B('g ^ O' ql =^=tSz L ^ /Z De.n s) f-L -3-r C-^fcsrxv - 5 7-% I IHV. CODE CLASS . ------- 3M * tnki*1 NO- _DEPT. NO._ FOR RESALE:_- __________ I--I CJNOT FOR RESALE o WEIGHT --!------------- UNIT OF .MEASURE. MULTIPLE . UNITS . ^ #L ^MAXIMUM3> -UHV~'?/ ' MINIMUM . __ XA, g* V tr VENDOR'S NAME VENDOR'S PART NO. F. 0. B. POINT FREIGHT ALLOWED ON TERMS SHIP VIA LFAO TIME TRANSIT TIME ECONOMIC PRICE M/IATiS/L. l- S/?LS c-aS. ..t.g-x-c:.CIYZlOj ,? -04/ 9-> :-o> 77 6 ('<. 3 9->o ^3I*l REQUISITION RECORD PURCHASE RECORD OATE TOTAL QUANTITY DATE QUANTITY DELIVERY SCHEDULE | |DATE QUANTITY DATE QUANTITY %/,, jS/VJ ^ 3Zf/f.r '/?`/C/> f. _ P-A? </ <5o 1 /e- C' .,*^35 i .... Vi PLct> ' ~>//L ^(rv` !! PLAN APP. DATE 5 te J1 P.O. NO. PU*, UNIT APP. PRICE V ua Ll ftm / ML J i>~r7 VC (S ' -1' 3kih? S'irt? ' ^to s So'Z)/ /<3 POZ'jf. '4- 2C* ^73 t. fkr /9f\-z^- ' 4 tt sz*< Jtt - (Su'O^, A. 'Z 7 / IPJS7 y %i?7o z_ (S' J.cY* >sfih> o& r'ZL 1 . I /*4'V.V 7; i i- 7?/n l & PLck7 ^1 yy/* '/a/7: s 5oc/: ^ 7C 56o i -- Pi,3 3 7.1-397 YstJft Sot> f\ i 1 ^ -47"j f r.O^'! 3/*4 5-.o'i -/'^ : : i / fy/'/J . 737*1 c. i msLM. t&tefr O tyxihi 5cc;,'7lYcc/1 44_______1______! ^MlL. %, ?P!X, c 7N/yk 6od 7nj. bcA^(s^^Uk^)... ! ;f. J/ttr. 9?<fr> M'. - ^ v X- yio/ti 600' foih Soo' ' /; r Kf/s* /rpp /<?/ 4/w/tr W -sklkl i ! $#/*/ 2. MZ/ft ; iii 5(0 2l**Jte 5061 zks)& ^24It 3 Soo' ^llis *M*; %/, Soo1 see [ ---- ^5^/------------C~,j tf_ ._ _: ... :^b -310*1 .eShlXHr- ty/lfe Wl 7ll _ +ZI-0 S27-? ,,.. r r______21 - . . Jferjivzij_ ;./-7;' I! u --rr***>** pu.rtr i yTjqg<>Lg:gtonys<omj.jhiuiwjiyTliwM4W>W?i,jt|^w>H * .-- ; ---------- y*W/l /fty/C? ')- r^YAT^ - A ^/ /7.*aas '1 i J 1 y___________________________ : sS /y y y <5~/y i j yyyyri. PART NUMBER OK L U U t no. . * 14 .15 IS 17 18 1` sc.tf anz/ 7/W&/ELING PURCHASE REQUISITION Ps*&**'' '' 1 fry***-- lA't * mivpp ^5}/' 7 CODE HOPART NO. ^5 / y7 DESCRIPTION. )c?S.5~ yn g-T- wo1 -JOO / <a >03 fir qua i PhiSA, -d?---^Qj?..e..r .//jig i,-------------- m/m r p-f, .^56S in1 /lP&- z Oe.n s) /-z. mv. CODE CLASS _ a-r;# c-o^fcs-vN * . ,, , li 3' I * %,l***' 4- J3EPT. NO.. XjL. FOR RESALE___________ :_____ crNOT FOR RESALE. WEIGHT ucAQtmc J 4/ 2 r,PJ^ ^ .MAXIMUM. /r ^^7/ MULTIPLE _ UNITS ^L-7.MINIMUM.. VENDOR'S NAME VENDORS PART NO. F.O. B. POINT ^5Za------------ :--------------------- $#L&S--Ca/L ^ &>&% 5 hmuCilaUi* SyjQjJ>y_ FREIGHT ALLOWED ON TERMS SHIP VJA LFAO TIME TRANSIT ECONOMIC TIME QUANTITY <>4 g? e x r*Av yy 'frio- SH/6?~o</ /;-^?7 6>/<>4 4h l7U*jj - DATE TOTAL QUANTITY ^izj REQUISITION RECORD DELIVERY SCHEDULE DATE Cx> V? 43ii//'--7J STC?T> 7//6 A Strv1 V!0$(/&' ^2^ 5Vz>' /0/1 ' 6* SZi*Jt* - Wh i, Qd viah ', Sor/ 567 boJL ^OL1 m 5oo fc\j% F)Ob\ 'WiSSoc/ /V, S 5bo j x j(M-mM PURCHASE RECORD DATE 5 o - ^,-,'Tfl / < -jar/ggyfAS; / Jrcm H/^5* 3^*2Z2J=_ ^ `^*70 /5^'> 1 AZAtZA L IJ-JS7 y^ce? b-0(pO ^ J.c? %LZ "^[Ml ^>UL 737*f frbjzin* ...Ti- 'I2LMMl JY-// '.L 97or^> [Me 5oO' fe*? .500 5^<g* ^4r/<o: . soo1 Hits. : td* 1 tern sip 7/ ESSII ET go/,___ L^'- > \ A 31A 5%lAbaacjrL. ^ "h!.t ^?jTj7V57-) 7* ./ 1-/7; I INVENTORVCLASS I~ VENDOR-OR ACCOUNT NUMBER___________ 1rtTW svo >*rr1 I CU,*g nu; *- 4t - * ( 44------------------------------------------------------------------------------------------- Af M2j2,, get/ ana/a % bmvpp '/j "<?&>- : x^6t---(3rM-.-- %\?Ab: JCOOE no.. ..PART NO.. nPBrp.PTHO U *3 &r CWg\ |, *7/o/gi T'k 6y nr o^ )q Sg__ I7y\ \.jlt,<Z dj.__-------------------------------ijAlf .JpT. \ De.n s) f-t ^ /Z*/o INV. CODE CLASS _ oc-i^ *- T Niff lift ArfT No..^/^../____ZJm* !.T.T--PfAw- n FOR RESALE:.__________ 1__ 1 0 __L UNIT OF ..MEASURE. 4- ,,DEPT. NO... .MAXIMUM.. L"""....... .. --- -- asl H VENDOR'S PART NO. F. 0. B. POINT FREIGHT ALLOWED ON TERMS SHIP VIA LFAO TIME TRANSIT TIME ECONOMIC QUANTITY PRICE / J'a //*><: rf/4 /Vt// l. <~ ;? AO. P,A\tifc DoLk: SflLtS c v ^ &>>% <r`/? . /' OS*} /f-ni <aitex <2 #/>" WK* ?~o9 2- C' Of 1*1/ '.r 1 -j '- 5 i/h d / 'TtUujj - lMji>jjJ'trti~'c& DATE %/,, 2F//y c TOTAL QUANTITY .575/9 -ZJV DATE REQUISITION RECORD DELIVERY SCHEDULE QUANTITY CATE QUANTITY &o 1 ?'>A? DATE QUANTITY y_ /- J PLAN APP. PURCHASE RECORD II P.O. NO. rut. Aff. UNIT PRICE mr / Ph (: fcyy? \/ / /,?* 7* irw-/ 4i/,^ S'crD ' V/t, Sov1 V/(i3 r 6DZ j- f q _ 36^j T&rau i ! ray J yirjyc <s . i1 ( CMS? y [ztf ?/zr 3^' /oJ ! rz.-' ' t "M SZ!u S'0* ^0/7;& 500 1 z''' 5^ i ^J *vOCj ! 7Xxf ^ S)h>> -i ; 5CO i1 7 i <* /r4 ss'^l '/>""! /ZA. -9- 7 ^:-74 O/POSu. t; t v ! (* 11 ii / ! pn Z (? ~0fa 0 J.C 7J: '#//* fPl3 3 7.13??* w/iJ / 737*9 / *+* cv- V'ifw V yajzir ' O- 5 ?-.* Vouhtk 6ct!\ '%ySpo' W`ht________ J_________ OK Ml 6 Vtt/ik ' *^ 6od[ f/u' 5ooA-(&* A?. ._.. !/ ^ |Z]9?s> <?/r \ M/ - ^ '500sho$ pstv soo'\ 4/iv/f/1 W SO# 1 : /? 1 ffy/z/p/rw K .. 1 Wfe/klpMZ^U a ' Zlz*lfo 50l tysltf Scc 1 71 WlG /?.hY4CJ3 ! "'|*&4ji3 SOP* ty/is Soe r^S . > V 731 o7\ "\ilfiLsLi. 1 -&rrr$ ~iL I. 1______ 7} ZAJ-L-K-3-<- ? .0. TT IT o, . n I ptjcr FfHH-tf 'gpji' H-v-n sP______ *. J) ^LijLirr '1' : 7- '5 00 * ..tll 4? *A> - rtYAT/' - <0 1* 4m- /// vi {*<3 /y < ' /> PART NUMBER OR CODE WO. JBAVELING PURCHASE REQUISITION---- BUYER. DESCRIPTION. BACK PLATE I NSULAJJ OH-^Uf Jne>' - .&.....i.v/f PS-2l2$ 280471 7 nH -n ? How/ ho INV. CODE CLASS _ FOR RESALE____________________ -ACCT. NO.. ElHOT FOR RESALE` WEIGHT VENDOR'S NAME VENDOR'S PART NO. P it.XA/tUiTHiAl. st>lS /V. h s metf*.JfiHtJS- rtflUVU.lE_____ TjALE. A Saetf XNO,. rtLct. 0 Pi /#n/i P.O. AKJtoAf C-te,K6r /^s9 *Lj.PLANT NO. UNIT OF .MEASURE. MULTIPLE . UNITS _ f. o. B. POINT FREIGHT ALLOWED ON TERMS t-en/k- ts5e. iO /& cs.t 7w' >t > to <l',kn /]:/L " n 7 'It .DEPT. NO. .MAXIMUM. .MINIMUM.. SHIP VIA LEAD TIME TRANSIT TIME ECONOMIC 3iT@ J>2.<4/laT 2IlQItJf ? iZ ,on / c 7+- ft.jTo f'eM.-.-tr u-p l Lot m li- Pxa DATE u 'adz Mw Vtlhtt `At71 %/y TOTAL QUANTITY rer 3.T 3^ 3.r 5-T REQUISITION RECORD DELIVERY SCHEDULE QUANTITY PLAN APP. jWI 7 i/ /?-nte Hz / 3S" 5/g Vlo 36' vn v SFT up<3. 13/H 9c si+Ci 7* - v-f <a^r & 5^- '<# iLdg.fi.XI HJ &> 7. 3S s- jsc/'- <5 u.<c ~rr- Taft ^A PURCHASE RECORD si / $7974> / &32Z 3 A UNI'T PRICE 7TTVZ s&tM Z ^.op 5' 7//2 / iy z P7fW Lr.i> OS n.1* ZLa L z^7iHV43.9S>^ PL L ^QS7J> / /5 A S637'i </* `xL/i 2L' 7^ /9Sb-^ V(,/&3 *lult3 s4/^ %^4 '/n/r(p 3is.q /O Vii/g-^ /0 1 Sfoki to /O Ukr'IT ^ Ii/ml. '7 io 7 ID H-ltt /o CO T7 M fatszMo -'hjsi | 7 jfyjGLiJ. zjSi rarvqf iS'.-T 1 /, f Ux %Aj - A /<jf ^:- ./ .> lUi1 S'MSR / *; ILL mL L/_ - ' *v * ,- V.. '^SJOOlll I INVENTORY CLASS I VENDOR OR ACCOUNT NUMBER J2f7i&U0 IWllHil'lllWII PBIHTtp |h V S 1 '.O f _ ^RAVELING PURCHASE INQUISITION----------' " BACK PLATE . 1 NSULAJJ.0H^lASs goyy/ 8U PtJ"2T2? 280471 DES CRIPTION.. . _ . ( a^/al.- n / . "fej____ /, ,'rt t w'/til)1 ... "J S _ tfi j rsn ./&ss v 6zM (HV . as* .. .. ACCT. NO___ SXW lyy________PLANT NO__ JLDf UNIT or ' ll '1 NOT FOR RESALE1 <Iu e*sv VENDOR'S NAME n WEIGHT VENOOR'S PART NO. r. 0. B. POINT MULTIPLE UNITS FREIGHT ALLOWED ON TERMS 5 ZtiPU,STRlkl. ?filS J_L JnHtJS-MflWWiLE 2. sa-etf S>iV -=\m 3 AtotoA/ c-A&yer pH"-. 7^? fit i. ft/& rc^2~^ <5. *3.a'x. tO =Sk , 0/-&& <K\ try ( vjq k 7 . ; - , i/first' 'ft PT. AIO. 1 AXIMIJM 2 5~ K fO MlINIMlIM SHIP VIA LEAD TIME TRANSIT ECONIOMIC TIME QUANTITY PRICE 3^"(S / '1.4/Ut 2hplt^ i S2,00 / c_ ! + %`JTo ^ Ja^T 1A^>/ |iLor 4 J| _ -..'.X_____ REQUISITION RECORD j i ]j PURCHASE RECORD ^ DATE TOTAL QUANTITY *h&t 3S 3.T j! i/n 1 tfufo 3r 3^ 3.r 3S 4W* *** DELIVERY SCHEDULE PLAN OAT QUANTITY DATE OUANTITY OATC OUANTITY APP. z - 1/ JiT Pz&j 7 3r */g , 33* */n 3 S' ' 3/S /*?- 0 /82 - . ST-P<2 13."?+ PL. 3, /0 C.gftT~l &'!* < /6. s-4 /i Tp/cT/7?- FT7^ ysvzw. J 3.--' ; a. > yn <rz> c1 jl. ^ /.<. rS s t ' ^ /3f> ^7 yf - fijL 1 A.*'* A rrzffO "B y- c^VUc/1 FT OATE i s! P.O. NO. ro*. UNlV--' k*r, PRICE i- I7i 4797b ~rrrm, <<str*Ai. 1 Ah* /j S332Z t"* 2 5 7//Z /) a.?p L*./ 2/xJ L ^i5? &CCa e>,;-97 'v n-jz L as? F/1 r it 3.&- rS.2'.V/' L S"OS7^- _ $6579 2, c/JJSl / y foW* 1 JV~ b ur7**ius 3. /9Slilf Yjp'SOM. Vc/ft3 10 Vtifo j IP nhh3 10 ,C 5Ulii to SJI*}S4 j l^fi. --------------- 71 fu | **/**/s4 1* Hilu L to 7 > RACC $- * 1* j`*W& i*> Wnln\ 10 '%kr >o ID H'W . 1 Co ii 1 | 1 i FORMJIM-2J2 V7*> *SUQ 1 r ,r ij f&r*i I /p1' Jsh.C. M He. 33 Mi - y>/ 3 3_ i' k?aux~- v I , ! ,['- ]/ ( :, ' i < 1 `; '< J !1 /; J V3172 1 7 .JV K Ifey lUjF\ Fiy. ___ 1 A /< 7 ' .' f y -- V i i a ': l7.-^ i /. ?// i vc f: * ^ t . t! j 1! i 1j i }|\i 11 |1 i i ___ i 1 r III ___! -.-X. m'*Kp * v j < ACTURING COT. U.SA MODEL [Pas USA^E ASSEMBLY NO. ^ ^RAVELING PURCHASE REQUISITION"--' BUYER. DESCRIPTION. , BACK PI ATE PS-2l2;J L FOR RESALE___________________ NOT FOR RESALE I NSULATJ-ON ^r'-'^^' ^aPTMn ^ g^7/ ' DA DT un 280471 X.slJ? J^ UNIT OF .MEASURE. 7 j -nr- ' n. .DEPT. NO.. .MAXIMUM. .MINIMUM. ~ a S VENDOR'S NAME VENDOR'S PART NO. LEAO TIME XfJiU.iTR.lAt. */*lZ I>fV. r^H a-. ^ S_ati.riSH- M/Ar)U?VatLLXZN^>?.MLI 3-g/?g S^bre.e- * Pla/vi P.o. &Jk >8 5k iJAaa; j/t' 77 V5t1 AfOto*t c.At,ter #Si t,c mi TI . . . nn9., j_ 2hqh^) liZ.tro/C * "'s'oy ' vq3; 3S& / <S. V// pt-Hi er-t / LoT TOTAL QUANTITY 'Ya/W s r tA z/i7ha 35 34" %h, 3S~ yfufo 3<T y* 3S ^o/: 7 IS/atk f) REQUISITION RECORD PURCHASE RECORD DATE QUANTITY DELIVERY SCHEDULE OATE QUANTITY DATE QUANTITY 1PLAN liAPP LA I t P.O. NO. ru. 75 Atr. PRICE :r i/ /*?- %./? p SFT' Up<Z 13.9+ SffT- * P flu.. yd <s> 7.3syi<.i ~rm / `?7f76> r* '.iSffn/- / S332Z /sit. Hzs^ / 3r / - 5 S'T- ^ /C. So c.Rft-n \i Cr. 7. ? / S7//2 6 r*A.Q( &/g 7iD /f7 / 35" 3s~ X< r* ptT;r?777' O" <5^ ? 6 t;S ll^%7y / 4til C<A H p/SW bz> 1 772A ( &s?y t 3.9Sj S. ?/.V t S'os79- / y 1 3oTSK $6571 A PL Y\A A3.f jL . ______v^h? yrviffti Nd&lii 0 ---- CprtJO/ -------- f R\ 3 /?9SIf ./I '1 V*/e3 10 'Info / | < F v,,- . -y r>- 3 3JFfo /l %!*3 !*> slols3 to An fit?. i33 Mt - '/A'J / fyftl S7 10 10 Ohsfe. ( r\*f4. ? *^i i , J VSZ72 / ' *t iy lo %/m L ^ 3 llbfi\ 3-7^ "hlku 5-IS.ft 1* to ID i to to j__ ; !'- L *.h ' <'J . A v< *7 */ ^ -i.: 7" A S'1list T 'i /,,7A v-r f be?Oe'r 3/ /. ://v _ j ; L . 1______ ! i i J2V7p5U0 ` :r i * r1 ii . . KtNItD IF PART NUMBER OR CODE NO DATE a/ / ^7/7^ 3h %* TOTAL QUANTITY '^ 33~ 3r 3S" 3<r 3 S' OATE Mi QUANTITY 1/ 4-/hSj 7 3 S' s/z , i 3S~ 7a* 3 S' f/4,d '.?/r DELIVERY SCHEDULE OATE QUANTITY DATE OUANTITY PLAN APP. OATE ii P.O. NO. PU. T arr. PRICE 1/*?- ScT-Up@ i* .<?+ / <?797ls <strAff 0 % /? Mu. > g^uas ^ ^5/ 7- Sg/. - Se't~r- ifo /- S* cRftTi. AJG> 7,751 / &3S2.3 yjji.oi % / 5 7//2 >TA.OP_ A<" WZTa r'-'tr. /?r S", 7K $ ^ - d/<<i STZ> ,v d /c /C M-97 / ^rS f>Ck if !/ ,'772- rkl t vi 3SS*~ s.v.\,r. L Zr'osr?' / / do 9Mi * SO 579 7 SF) $3+6 f) % /35 1 1 /f FT'# Cfnjof. wv ^ vAW?*7 * cfJJLSf 3 /99S17 \H. a. *SV*4f 'iha *hlt3 Vx/t* ( "hiku V*kn\ Hs.fi: *i 1 1 ! 1 i 1 10 fates S 10 1 r ,,v^ -V IC Wold ID h)t4i &h*fA to JO 7 As Jfe <13 W yU-yU- I&OL-. '/i ";A/>4 u '* ; ............. ! .! 1* faal^r !*> !'-.- 1/ ( ./L_ 10 id V?. ' 10 to i . 1 ;i ! . ___ _ __ __ : : J 2 17*500 i%* 1 33 rfo / ** %!<& 3 rKHut fim ? 4.3*7$ 1K A 1, ft/ r.,/ ', r ! n 3 W7/ -A /J T ': F7- /?.// _ ;i PMMty i*. i>* i/ 1 ' v' , w*fil '/ . T ' ! I CO d>> a> cemea/ted assembly OF'i - (7-J /ia'/? ASBESTOS "-u7 m/llboab'd. - , ' y- C7)-^% PIA. HOLES |S PRINT ; ) \- IRON FIREMAN MA Tv. V DO NOT S 34 m 0 TRAVELING PURCHASE REQUISITION 1217-500 t--! ii t JYER ESCRIPTION. V. CODE ILASS _ >R RESALE___________ )T FOR RESALE_______ VENDOR'S NAME _ACCT. NO.. VENDOR 5 PART NO. 44- w tm .PLANT NO. UNIT OF .MEASURE. MULTIPLE _ UN'TS _ JL .DEPT. NO.. .MAXIMUM. .MINIMUM. T.O. B. POINT FREIGHT ALLOWED ON TERMS SHIP VIA LEAD TRANSIT TIME TIME ECONOMIC AXXoa/ &A6Kf DATE TOTA1 OUANT `4?, 4o m2 a in htfta. to 10 REQUISITION RECORD DELIVERY SCHEDULE DATE OUANTITY %u\ / H-o ID3/l5/ i %> mk to DATF | OUANTITY | J? i i" 'hlte \o i "khi ______ **} '* *i DATE io, L-YI '1 OUANTITY W.' PURCHASE RECORD PLAN APP. DATE 5 8 P.O. NO. ru*. UNIT *rr. PRICE /^7 4924-6 </ /& MlAL_ L a/', Z mtL. JL ZSSil 'P rJ R z. 33a7 io; X* . -J. ` o ' ii i T tj i 1217-500 * JYER ESCRIPTION- V. CODE 2LASS ,, )R RESALE_______ )T FOR RESALE- -ACCT. NO._ WEIGHT mt______ PLANT NO- UNIT OF -MEASURE. MULTIPLE - UN'TS - JL -DEPT. NO._ -MAXIMUM. -MINIMUM- VENDOR'S NAME VENDOR S PART NO. r, o. b. POINT FREIGHT ALLOWED ON TERMS SHIP VIA LEAD TIME TRANSIT TIME & i> L $o , AX***! C-A6Xf ECONOMIC DATE 'Aly TOTAS OUANT 4o 222 a m in \o REQUISITION RECORD DELIVERY SCHEDULE DATE QUANTITY / 4-o iklD DATE /? - mk_______toj_________ QUANTITY 4^ -V u -A DATE i-7, ,^e 'i xltl i 1 tyu IO i ! io ; lO \ \ ; i :j , 0UANT1TY PURCHASE RECORD PLAN APP. e 5? *4^7 / 4 934-6 z|C- %/it 976>4e X. 2ss PUR. APP. UNIT PRICE 3 /42 / /=-F/ * <\ { R X 33U7 to* ' S~'- II * -- l\ 3" JL. -I--- {- >M 121 T--; 5 W /% 00 T WM[f l GASKET jyer___________ p S " 21V}-- ESCRIPTION_________________________ V. CODE -i as<; )R resale )T FOR RESALE CD VENDOR'S NAME J - AKHoa/ GASKSf acct. no WEIGHT VENOOR S part NO. 144- 4% r.o. e. POINT Za a PLANT Nil UNIT OF MFASURF MULTIPLE UNITS FREIGHT ALLOWED ON TERMS 4 DFPT. NO MAXIMUM ro MINIMUM SHIP VIA LEAD TIME TRANSIT ECON OMIC TIME QUANTITY PRICE DATE OUTAONTTAI REQUISITION RECORD DELIVERY SCHEDULE DATE OUANTITY DATF. QUANTITY DATE -/^7 <4o H-o /? - W\?lsL, ft liPfH, In 1C iUklk to l* Ijlu _____to___ j______i. to "bkl lO t-'/ f-,. u h _____1 \\\ ! OUANTITY PALPAPN. R ; PURCHASE RECORD CODE DATE P.O. NO. FlU. AFF. PURNICITE W3j / 4 934-6 4 /$> %/7i z> 976 4o %/ X. ZSS 41 / 5-A/- %}L JL 33U 7 ic4 / i 44 ' ,i;i ' i ij i , 1217-500 ?M ,s`-' A r> 1217-500 DO NOT SCALE T H IS PRINT DO NOT S C A L E 'j^p jP R IN T -. ' . ' = File No. 7-401 REPLACEMENT PARTS 401 Series Pneumatic Spreader Stokers CONVEYOR FAN ASM. (See figure 4 for component part^.J COAL DRIER (See figure 5 far parti.) OBSTRUCTION GUIDE AND CLEANOUT (See figure 6 for component parts.) Figure 1 --PS-401 Series Pneumatic Spreader Stoker - Refer to Parts List I (Pg 10) MODELS COVERED - 1949-1964 MODEL PS-75 PS-110 PS-160 MODEL PS-200 PS-300 PS-400 IMPORTANT: Always specify stoker model number and serial number when ordering. GENERAL. Replacement parts for the 401 Series Pneumatic Spreader Stokers are listed and illus trated in this catalog. These units were first produced in 1949. UNDERGRATE FAN UNITS. These units were equipped with undergrate fan units and an air duct with volumeter. Refer to Table II, page 15, for usage of the items. Refer to figures 9, 10, 11, 12 and 13 and to Parts List III for identification of parts. GRATE PARTS. These stokers were equipped with either stationary-type grates or power-operated dump grates. Refer to figures 16, 17 and 18 and to Parts List I for identification of parts. THE WILL-BURT COMPANY ORRVILLE, OHIO, U.S.A. Printed in U.S.A. Form No. 1986A .. i File !v'o. 7-401 Page 2 LIST OF CONTENTS PARTS LISTS Page Parts List I - Standard, Optional and Extra Equipment ......................................... Parts List II - PS Gear Case. Assembly............................................................................ Parts LiSt~III - Undergrate Fan Units and Air Duct Parts ................................... Parts List IV - Conveying Fan Assembly ............................................................................ 10 15 21 24 TABLES Table I - Stoker and Conveying Fan Drive Data Table II - Undergrate Fan Data............................ 9 20 LIST OF ILLUSTRATIONS Figure 1 - PS-401 Series Pneumatic SpreaderStoker .................................................. 1 Figure 2 - Front View of Stoker........................................................................................ 3 Figure 3 - PS Gear Case Assembly..........................................................................................4&5 Figure 4 - Train View of Conveyor Fan Parts........................................................... 6 Figure 5 - Coal Drier Parts..................................................................................................... 7 Figure 6 - Obstruction Guide and Cleanout Parts ..................................................... 7 Figure 7 - Conveyor Elbow Assemblies .......................................................................... 8 Figure 8 - Transfer Housing Cleanout Parts ............................................................. 8 Figure 9 - PG-4C Undergrate Fan Unit.................................................................................. 17 Figure 10 - PG-50, 51, 52 and 53 SingleUndergrate Fan Units .... 18 Figure 11 - Duplex Undergrate Fan Unit..................................................................................18 Figure 12 - Internal Parts of Undergrate Fan Units .................................................. 19 Figure 13 - Volumeter Air Duct Parts.........................................................................................19 Figure 14 - PS-2413 Nozzle Assembly ................................................................................ 25 Figure 15 - Coal Agitator Parts............................................................................................... 25 Figure 16 - Miscellaneous Parts ....................................................................................... 26 Figure 17 - Dump Grate Parts...................................................................................................... 27 Figure 18 - Stationary Grate Parts ................................................................................ 28 4U I bLKIth rMtUMAIIL b^KtAUtK blUKtK * tile No. 7-4U1 Page 3 CO >LU a- CO CD cn o> o CM o o CM O CM CM to CO to CL in Q. Q_ X O o Jtjl CO " in to CM CM CO LL CD CM CD (D O) O o --* CM CM CM 1 to to to Q_ a_ a. F ig u r e 2 - F r o n t V ie w o f S to k e r - R e fe r t o P a r t s L i s t (P g 1 0 )I CM ZT in in in in in zr ZT ZT zr CM CM CM CM 1 CO to to to CL. a. o_ Q_ OO~ -- -- CM CM CD CM CM CM CO 1111<M CM CM CM 09 09 09 C/9 Ou EL. Q_ O- CO o> CO CO CO CM 1 CM 1 >LU CO CO CL CL 3 >* O LU oX ZT ZT in cn ZT O CM CM CM CM CM CM CM to CO to to 0- a_ Cl CL CO 03 o CD in m CM CO CO CM CM CM t to __ i to | CO CL in a_ 0. CM CO ZT in to r*- CO O o O o o o UJ 0) CO CO CO CO CO CO to L CM CM CM CM CM CM *C z> 1 1 1 1 1 1o CO CO to to CO CO <4-- Q_ a_ CL CL a_ CL ce IHPCRTA RT: Always specify stoker model number. file .'`o. T-4U1 Page 4 401 SERIES PNEUMATIC SPREADER STOKER -* Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IK PORT ART: Always ste stoker model number. HU I ocn I CO rMtUMAI IU OTKLAULK 5IUI\tK 40091 40109 * rue ixo. i-wi Page 5 Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IHPCRTAKT: Always specify stoker model number. File-No. 7-401 Page 6 UOI SERIES PNEUMATIC SPREADER STOKER IM PORTART: Always specify stoker model nvmbe H001I8 F ig u re 4 - T ra in V iew o f C onveyor Fan P a rts - R e fe r to P a rts L is t I (PG 1 0 ) (R e fe r to P a rts L is t IV (Pg 2 4 ) fo r P a rts In c lu d e d in R eplacem ent Fan A s s e m b ly ) -* PS-2053 ASM PS-2070 PS-201 I PS-2073 PS-2075 401 SERIES PNEUMATIC SPREADER STOKER PS-2064 PS-2065 PS-2137 INSULATION S-2300 GASKET Kile No. 7-401 Page 7 Figure 5 - Coal Drier Parts - Refer to Parts List I (Pg 10) 41039 51064 51067 PS-2427 51066___ /| GSKT. Figure 6 - Obstruction Guide and Cleanout Parts - Refer to Parts List I (Pg 10) IMPORTART: Always specify stoker model number. File No. 7-401 Page 8 U0i SERIES PNEUMATIC SPREADER STOKER jt Figure 7 - Conveyor Elbow Assemblies - Refer to.Parts List I (Pg 10) :| 'i Figure 8 - Transfer Housing Cleanout Parts - Refer to Parts List I (Pg 10) IMPORTANT: Always specify stoker model number. TABLE I STOKER AND CONVEYING FAN DRIVE DATA P S - 20C I oui\ t uo i < uj z. ** O Sr Ji; o z o5< o in o cl z _i S w 2O 1- cc 2 o a. uj > CO o ^ to o cc o5 2H p* O CO m m in PS PS 93 \ CO CO co CO co ID CO O ro 0-- CO (O rr in N in CO 0. \ s ( p- T co CL -- CO a. <3 o_ co CO s -- CL O CO CO CO cn co u O' o ID o o o in CO \ <D o in o co in . ID in CO p co a) <31 CO o o O CO o CO CO w. in in CL CL co in CL in IL O ID (0CO __ <n m ID in CD LL u. CO CL CL p- o CO in in ss CO CO _ in -- CO CO ID co CO co cn o PSPS.9 7 p* 10 " ID TT in \ \ m o- o r> co O in o ID o P 01 ID CO CO CO CO ID o o CO CO O co o O , ,. o co o1 CO u> ID <n in in co in in \ CO IL U. CL CL o_ O' \ co -- CO co o in CO CO O in a iD (0 0. Sd -- 0. 0- S - 2215 | S -2361 1 PS. PS PS- MO. 4 'T IO N A L U SIN G 1 0 0 -P S N D R IV E 1 6 -8 3-P S -160) | 4-P S -160) u- - < u. _1 <o^ <*> g z `V a: d - :o fe "< in in in CO \ in CO *" PS PS o ID co o o ID X in S. Q_ CO <n 0- oO o CO CO CO \ CO co <J1 CO o ID o o o in , co CO o r- *-- \ ID co CD co co <o o o H o o CO CO CO ro CO Sd Sd ID CO in ID in in a. PS 58 O GO a o: CO < o oz z< J-- to in in CO co CO in , in N CO co co ID co CO G> CO o in o in in in m co CO CL CL CL 1 /4 | | PS-2215 | 1 P S -2361 1 NO. 4 O P TIO N A L U SIN G 400-P S FAN D R IV E OID in in in rw co ID or CO o o ffl o ID in in 0. ? p* co co OPT US 30 FAN UJ co CO o o ID . O5 S -- OQ D. in co co in N \ CL in CO o CO CO co \ co co <31 1 ro o ID O -- r- in (D in m CL CL in a S" o O ID in CL 'O co ID o in ID o 2091 28 21 1 8 58 1 /2 21 5 0 .N O . 2 NC in CO co CO in in N O in ID in m CL CO Pc*o* o in CO IL in CL in CL TJ P S -1 in CO P* CO o (D co iCnL <n cl in Q_ in P P S -22 2221 90 | 3250 O P TIO N A L U SIN G 200-P S FAN D R IV E MO. 1 'A N D A o m o> in CO CO -- Cl cr CO CO CO - s. CO co p* CO (D - in in cn cn in in CL CL IL 2940 P; in co CO ID co in ps in o CO z o _J < LlI Oz 2 Ll_ * c_ Li_ z o z d .Z d z UJ >1- D o o ro H z II CD O L_ o lL o LL in < O z L. 2 n_ 2 cl < X o in CO D p- < _J U X in > a: CL z> 2J- H cl o2 n2 2 < O H > < UJ > X< in UJ I cc in o Kzz 2O < < u. li_ o HO b cl H in 7 O _J o UJ aj UJ _J z cu << Lu o 2 cl o: UJ > < UJ oX UJ in u CL a. in UJ x zo <H LU in o z UJ O ro O u_ in X 2 2o X o z o in z H* X 2 lu UJ lu UJ lu H 1- h- X IL < 2 CL 2* 2 UJ CL J- O Z CL 2UJ CD UJ <n cr CL < X CL UJ < u u z == X CL > > > _J o H* < UJ a: CL CL O in lJ) 7 5 )(1 1 , 75) (4. IMPORTANT: Always specify stoker model number Page 9 File No. 7-401 Page 10 UOI SERIES PNEUMATIC SPREADER STOKER PARTS LIST I INCLUDES ALL STANDARD. OPTIONAL AND EXTRA PARTS FOR 401 SERIES PNEUMATIC SPREADER STOKERS. REFER TO PARTS LIST II FOR COMPONENT PARTS OF GEAR CASE ASSEMBLY NUMBERS SHOWN ON THIS LIST. REFER TO PARTS LIST III FOR COMPONENT PARTS OF UNDERGRATE FAN UNITS AND AIR DUCT ASSEMBLIES. REFER TO PARTS LIST IV FOR COMPONENT PARTS INCLUDED WITH REPLACEMENT CONVEYING FAN ASSEMBLY. REFER TO TABLE I FOR PARTS USED ON STANDARD AND OPTIONAL CONVEYING FAN AND STOKER DRIVE ARRANGEMENTS. FIG. NO. g& 12 PART NUMBER PG-4C 10,11412 PG-50 10,11412 PG-51 10412 PG-52 10412 PG-53 8 PS-33 13 PS-379VR 13 PS-381VR 16 PS-468 16 PS-469 16 PS-487 16 PS-488 7 PS-53IR 7 PS-533R 17 17418 18 17 17 PS-800 PS-801 PS-802 PS-803 PS-805 PART NAME QUAN. REQ'D Undergrate Fan Unit........................................................................................................ ....... Refer to Table II for usage. Refer to Parts As Required List III for component parts. Undergrate Fan Unit........................................................................................................................As Required Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit........................................................................................................................As Required Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit. .... .......................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. As Required Undergrate Fan Unit....................................................................................................................... As Required Refer to Table II for usage. Refer to Parts List III for component parts. Hinge Eyebolt.............................................................................................................................. 2 Air Duct and Volumeter Assembly........................................................................................ As Required Used with PG-4C Undergrate Fan Unit. Refer to Parts List III for component parts. Air Duct and Volumeter Assembly......................................................................................... As Required Used with PG-50, 51, 52 and 53 Undergrate Fan Units. Refer to Parts List III for component parts. Standard Pin Hole Grate Bar -8 x 24 In.....................................................................As Required Standard Pin Hole Grate Bar -8 x 36 in.....................................................................As Required Grate Support I-Beam for StandardPin Hole Grates................................................As Required (Specify number of notches and length required.) Grate Support Channel for Standard Pin Hole Grates ..... (Specify number of notches and length required.) As Required Elbow Asm........................................................................................................................................As Required Consists of: 2 - PS-36 Handwheel Eyebolt I - PS-531 El bow 1 - PS-532 Elbow Cover 2 - PS-560 Handwheel Elbow Asm.............................................................................................................................................As Required Consists of: 2 - PS-36 Handwheel Eyebolt I - PS-533 Elbow 1 - PS-534 Elbow Cover 2 - PS-560 Handwheel Dump Grate.......................................................................................................................................... As Required Front Grate...................................................................................................................................As Required Cleanout Door Assembly.............................................................................................................As Required Bearing Grate.................................... As Required Side Grate Sleeve .............................................................................................................. As Required IMPORTANT: Always specify stoker model number. FIG. NO. 17 17418 17 17 17 18 16 16 18 IS 18 18 17 17 13 13 17 8 8 8 8 8 8 8 8 2,548 8 8 8 8 8 8 2 5 5 5 5 5 5 5 2 5 5 PART NUMBER PS-806 PS-807 PS-808 PS-809 PS-810 PS-819 PS-822 PS-849 PS-859 PS-860 PS-943 PS-1007 PS-10 10 PS-10 13 PS-I0I8VR PS-1020 PS-1057 PS-2000 PS-2001 PS-2002 PS-2003 PS-2004 PS-2005 PS-2008 PS-2009 PS-20II PS-2012 PS-2015 PS-2018 PS-2020 PS-2021 PS-2022 PS-20 24 PS-2026 PS-2036 PS-2045 PS-2048 PS-2053 PS-2064 PS-2065 PS-2069 PS-2070 PS-2073 401 SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 11 PART NAME QUAN. REQ'D Side Grate Pin ........................................................................................................................ Rear Grate...................................................................................................................................... Side Grate - L.H........................................................................................................................ Side Grate - R.H........................................................................................................................ Grate Bar Bearing................................................................... ............................................ Ash Well Grate ....................................................................................................................... Hot Gas Outlet Assembly ................................................................................................. Consi sts of: 1 - PS-823 Hot Gas Outlet 1 - PS-824 Air Shutter Grate Support Assembly for Standard Pin Hole Grates .............................. (Specify number of notches and length required.) Stationary Grate - 36 In.................................................................................................... Stationary Grate - 24 In.................................................................................................... Side Plate. .......................................................................................... ....... Grate Leg Assembly ................................................................................................................ Dump Lever...................................................................................................................................... Air Duct and Volumeter Assembly - 24 In. Long ............................................. Used with PG-4C Undergrate Fan Unit. Refer to Parts List III for component parts. Air Duct and Volumeter Assembly - 24 In. Long ............................................. Used with PG-50, 51, 52 and 53 Undergrate Fan Units. Refer to Parts List 111 for component parts. Seal Bar ............................................................ ....... ................................................... Transfer Housing........................................................................................................ Transfer Cleanout Upper Cover .................................................................................. Transfer Cleanout Lower Cover ...................................... . ............................... Transfer Housing Bottom Plate .................................................................................. Hand Latch..................................... ................................................................................................ Upper Hinge Bar ....................................................................................................................... Shoulder Screw ........................................................................................................ . . Lower Hinge Bar ....................................................................................................................... Shutoff Gate .............................................................................................................................. Gate Guide - L.H....................................................................................................................... Gate Guide - R.H....................................................................................................................... Shutoff Gate - Stuffing Box .... ............................................................ Packing Nut Gland................................................................................................................ Shield Plate Assembly , ................................................................................................. Coal Worm Bearing Housing................................................................................................. Drier Inlet Housing................................................................................................................ Drier Enclosure Assembly ................................................................................................. Drier Sheet Assembly ........................................................................................................ Drier Cleanout Cover Assembly . ........................................................................... Consists of: 1 - V-690 Handle 1 - PS-2050 Cleanout Plate 1 - PS-2052 Insulation - 3/8 1 - PS-2235 Insulation - 1/4 In. In. 1 - PS-2236 Gasket 1 - PS-2237 Retainer Plate Access Plate Assembly ........................................................................................................ Consists of: I - PS-2054 Access Plate 1 - PS-2056 Access Plate Shield 2 - PS-2079 Insulation 1 - V-690 Handle Upper Damper Guide ............................................................................................................... Damper Blade .............................................................................................................................. Chain ... ....................................................................................................................... (Used on PS-300 only.) Damper Adjusting Wheel Bracket .................................................................................. Drier Inlet Top Insulation ......................................................................................... As Required As Required As Required As Required As Required As Required 1 As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required 1 1 1 1 2 1 4 1 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 IHPORTANT: Aluiays specify stoker model number. File No. 7-401 Page 12 UOI SERIES PNEUMATIC SPREADER STOKER - * FIG. MO. 5 5 5 5 5 1 2 2 2 2 2 4 il il il 1 4 4 2 4 4 4 4 2 4 4 4 4 4 4 4 5 2 2 2 2 2 4 2 2 8 8 4 4 16 2 2 2 2 2 PART NUMBER PART NAME QUAN. REQ'D PS-2074 Drier Inlet insulation ............................................................................................................... PS-2075 Drier Inlet Wrapper Sheet . ................................................................................................ PS-2076 Drier insulation ............................................................................................................................... 9" x 26" x 1-1/4" PS-2077 Lower Side Drier Insulation................................................................................................. PS-2078 Drier Insulation . ....................................................................................................................... 3-1/4" x 26" x I-1/4" PS-2080 Drier Insulation Wrapper Sheet............................................ ................................................... PS-2081 Drier Coal Worm....................................................................................................................................... PS-2084 PS-2087 Bin End Coal Worm.............................................................................................................................. Motor Sheave Assembly (Obsolete - replace with PS-2455) .............................. PS-2091 Sprocket .................................................................................................................................................... PS-209 2 Drive Chain . *................................................................................................................................ ' ~ (Used on PS-400 only.) PS-2093 Seal Gasket............................................................................................................................................. PS-2094 PS-2095 Thrust Bearing ..................................................................................................................................... Fan BearingHousing(Used With PS-2411 Fan Shaft Assembly) . . . PS-2097 PS-2098 Seal Ring.................................................................................................................................................... Fan Shaft Bearing Oiler ................................................................................................................. PS-2099 Fan Bearing Housing Vent................................................................................................................ PS-2100 Water-Cooled Bearing Retainer ................................................................................................ PS-2102 Fan Support Studs .............................................................................................................................. PS-2103 Fan Spacer................................................................... ....... .................................................... PS-2104 Fan Sheave.................................................................................................................................... (6- 1/2 in. O. D. ) PS-2111 Fan Inlet Cover Plate........................................................................................... ....... . . . PS-2114 First Stage Fan Liner (Also Order ( I) PS-2485 4 ( I) PS-2484 Fan Housing Seal I . PS-2116 PS-2117 Interstage Fan ..................................................................................................................................... Second Stage Fan Liner (Also Order ( I) PS-2485 Fan Housing Seal) PS-2118 Drive Chain ............................................................................................................................................ (Used on PS-75, IIO, 160 and 200.) PS-2119 PS-2123 Conveyor Fan Housing .................................................... . .................................................... Back Plate Insulation - 3/8 In. Thick .......................................................................... PS-2124 Back Plate Insulation - 1/4 In. Thick .......................................................................... PS-2125 Insulation Cover Sheet............................................................................................................... PS-2127 Air Duct................................................................................................................................................... PS-2131 Air Duct Gasket. ............................................................................................................................. PS-2132 Wrapper Sheet .................................................................................................................................... PS-2137 Drier Insulation - Fan Side....................................................................................................... PS-2138 Motor Shaft Key - 2 In. Long ................................................................................................ PS-2139 Motor Sheave Key - I In. Long ................................................................................................ PS-2142 Motor Plate ............................................................................................................................................. PS-2147 Gear Case Support ............................................................................................................................. PS-2150 PS-2160 Gear Case Drive Belt ...................................................................................................................... Fan Bearing Housing Support....................................................................................................... PS-2171 Bearing Housing Gasket............................................................................................................... PS-2172 Worm Housing Gasket...................................................................................................................... PS-2173 PS-2174 Bottom Plate Gasket ......................................................................................................................... Stuffing Box Gasket ...................................................................................................................... PS-2175 Air Duct Clamp Gasket..................................................................................................................... PS-2176 Balancing Hub Assembly . ....................................................................................................... IncIudes: 3 - PS-2362 Balancing Weight PS-2177 Coal Worm Sprocket Spanner ....................................................................................................... PS-2210 Fan Drive Belt ..................................................................................................................................... Used on Model PS-75. PS-2213 Motor Plate Hinge ............................................................................................................................. PS-2214 FanSheave ............................................................................................................................................... Used on Models PS-I 10 and PS-160. PS-2215 FanSheave............................................................................................ .................................................. PS-2219 FanSheave............................................................................................................................................... Used on Model PS-75. * Not j Llust rated. ** Refer to Table I for usage. 6 1 2 1 2 2 3 3** 2 * ** IMPORTANT: Always specify stoker model number. 401 SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 13 FI PART NC NUMBER PART NAME QUAN. RE<?'D 2 PS-2220 Fan Drive Belt ............................................................................................................................. 2 PS-2221 Fan Drive Belt ..................................................................................................................................... 2 PS-2222 Motor Sheave Assembly (Obsolete - replace with PS-24551 .............................. 2 PS-2224 Motor Sheave Assembly (Obsolete - replace with PS-2454) . . . . . 4 PS-2226 Air Duct Clamp ..................................................................................................................................... 2 PS-2228 Coal Worm Housing Bearing ....................................................................................................... 2 PS-2234 Motor Plate Hinge............................................................................................................................. 2 PS-2241 Sheave Housing Support ....... ........................................................... I PS-2246 Belt Guard ............................................................................................................................................ 4 PS-22 54 Belt Guard Support Clip .............................................................................................................. 2 PS-2257 Oil Drain Pan................................................................................. .................................... ....... 2 PS-2266 Chain Guard ..................................................................................................................................... 5 PS-229 I Drier Inlet Gasket............................................................................................................................. 2 PS-2295- Belt Guard Bracket............................................................................................................................. 8 PS-2298 Overflow Tube ..... ......................................................................................... 2 PS-2299 Cooling Tube Assembly.............................................................................................................. 5 PS-2300 Access Cover Gasket ...................................................................................................................... 2 PS-23 0 2 Gear Case Assembly. . ....................................................................................................... 2 PS-2303 Gear Case Assembly. .... ......................................................................................... Used on Model PS-I 10. I See figure 5 and Parts List II for component parts.) 2 PS-2304 Gear Case Assembly. .... ......................................................................................... Used on Model PS-160. (See figure 3 and Parts List II for component parts.) 2 PS-2305 Gear Case Assembly............................................................................................................................. Used on Model PS-200. (See figure 3 and Parts List II for component parts.) 2 PS-2306 Gear Case Assembly............................................................................................................................. Used on Model PS-300. (See figure 3 and Parts List II for component parts.) 2 PS-2307 Gear Case Assembly. Used on Model PS-400. (See figure 3 and Parts List II for component parts.) 4 PS-2350 Seal Plate 4 PS-2353 Dust Check Ring PS-2357 Cooling Tube Clamp 2 PS-2359 Motor Plate Hinge Screw 2 PS-236 I Fan Drive Belt 2 PS-2365 Motor Sheave Assembly (Obsolete - replace with PS-2457 I ..'... 15 PS-2379 Coal Agitator Assembly Consists of: I - PS-2380 Agitator Bracket 2 - PS-2391 Retainer Ring I - PS-2385 Clamp Plate 2- V-5252 Agitator Wheel Arm I - PS-2386 AgitatorWheel - R. H. 2 - 17023 Agitator Bearing 1 - PS-2387 AgitatorWheel - L. H. 4 - 170 27 Thrust Bearing 2 - PS-2390 Shaft 4 - 17028 Beari ng 4 PS-24 10 Retaining Ring 4 PS-2411 Fan Shaft Assembly (Used With PS-2095 Fan Bearing Housing) . . . . Consists of: 2- PS-1 123 Fan N.O. #87507 I - PS-2105 Fan Shaft Shaft Bearing 2 - PS-2460 Oiler Guide I - 38298 Spacer 4 - 41020 Retainer Ring 14 PS-2413 Nozzle Assembly.............................. Consists of: 2 - PS-309 Sleeve Cover Plate I _PS-44 Nozzle Hinge Pin I -PS-45 Nozzle Control Rod I -PS-47 Nozzle Handwheel I -PS-81 Nozzle Body 2 - PS-31 I Support U Bolt l - PS-2180 Nozzle End I - PS-2181 1-in. Deflector I - PS-2182 1-1/2-in. Deflector I - PS-308A Support Assembly I - PS-2183 2-1/2-in. Deflector 5 PS-2415 Baffle - R.H..................................... 5 PS-2418 Baffle - L.H..................................... 6 PS-2427 Obstruction Guide Housing 4 PS-2430 Fan Housing Seal .... IE PS-2431 Coal Agitator Shaft . * Refer to Table I for usage. 2* * * 2 I I I I I I 2 I 1 2 2* I I I I 1 2 IMPORTANT: Always specify stoker model number. . File No. 7-401 Page 14 FIG. NO. PART NUMBER 15 PS-2432 15 PS-2433 4 PS-2434 4 PS-2440 2 PS-2452 2 PS-2454 2 PS-2455 2 PS-2457 4 PS-2459 4 PS-2461 4 PS-2462 4 PS-2463 4 PS-2465 4 PS-2468 4 PS-2484 4 PS-2485 16 S- I009R 16 S-IOI IR 16 S- 10 12 17 S- 1049 16 S- 1050 16 S- I050R 16 S-I057R 16 S- I058R 16 S- 1059R 16 S- 1098 17 S- 1099 2&4 40048 4 40125 6 41039 6 41040 6 41041 6 41042 8 41043 2 41 344 2 41350 2 41526 5 5 6 6 6 6 6 1 1 2 2 2 2 2 4-2 51060 5106 1 51062 51064 51065 51066 51067 51070 51071 51102 51 1 13 51 1 14 51 1 18 80348 80689 401 SERIES PNEUMATIC SPREADER STOKER / * PART NAME QUAN. REQ'D Thrust Bearing ..................................................................................................................................... Be ar i ng ..................................... ......................................................................... Fan Wheel.................................................................................................................................................... Sliding Nipple Assembly ............................................................................................................... Motor Sheave Assembly...................................................................................................................... Motor Sheave Assembly...................................................................................................................... Motor Sheave Assembly...................................................................................................................... Motor Sheave Assembly...................................................................................................................... 4 4 2 1 *j *| *1 *| Conveying Fan Assembly ................................................................... Refer to Parts List 1 V fo r Component Parts .............................. 1 Balance Ring............................................................................................................................................. 2 Fan Bearing Housing (Used with ps-2468 Fan shaft Asm.)..................................... 1 1 1 Fan Shaft Assembly (Used With PS-2463 Fan Bearing Housing) .... 1 Consi sts of: 4 - 40120 Retainer Ring 1 - 38298 Spacer 1 - PS-2105 Fan Shaft 1 - PS-2466 Bearing - N.D. #97507 2 _ PS-2460 Oiler Guide 1 - PS-2467 Bearing - N.D. #97607 Fan Housing Seal - (Used With New Style PS-2114 First Stage Liner Sheet) 1 Fan Housing Seal - (Used With New Style First and Second Stage Liner) Ash Hoe and Handle - l-in. Pipe ........................................................................................ Used with pin-hole type grates. 2 1 Clinker Rake and Handle - l-in. Pipe. .......................................................................... Refractory Tile Slab - 3" x 6" x 18"................................................................................. Used over nozzle opening in front wall. 1 1 Air Cylinder Assembly for Dump Grates ......................................................................... Ash Hoe....................................................................................................... ....... Ash Hoe and Handle - l-in. Pipe ........................................................... Used with ribbed-type grates. As Required 1 1 Clinker Hook and Handle - 3/4-in. Pipe......................................................................... Slice Bar and Handle - l-in. Pipe........................................................................................ Slice Bar and Handle - l-l/2-in. Pipe......................................................................... Hot Gas Temperature Indicator - 12-in.............................................................................. Steam Cylinder Assembly for Dump Grates. .... ..................................... 1 1 1 1 As Required Retainer Ring .................................................................................................................................... Toggle Handle .................................................................................................................................... 3 2 1 Toggle Link .................................................................................................................................... Lock Pin........................................................................................................................................... Lock Pin.................................................................................................................................................. 1 1 1 Motor Adjusting Bolt ..................................................................................................................... Cable Spring.............................................................................................................. Quadrant Cable Assembly .............................................................................................................. Sheave and Housing Assembly....................................................................................................... Consists of: 1 - 41231 Sheave Housing 2 1 1 1 1 - 40076 Spacer 1 - 41232 Sheave Housing Cover 2 - 40078 Washer 1 - 41527 Cable Sheave Worm Coup!ing Nut ............................................................................................................................. Worm Coupl ing PI ug............................................................................................... ....... Worm Cleanout Housing..................................................................................................................... Cleanout Stud . . ..................................................................................................................... Worm Cleanout Housing Cover...................................................................................................... Worm Cleanout Housing Gasket ............................................................................................... Bin Plate.................................................................................................................................................. Bin Channel ........................................................................................................................................... Bin Worm Bearing........................................................... ..................................... ....... Lock Nut .................................................................................................................................................. Lock Washer ........................................................................................................................................... Motor Adjusting Bracket .............................................................................................................. Flare Nut (Not Illustrated)....................................................................................................... Brass Elbow........................................................................................................................................... * Refer to Table I for usage 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 IMPORTANT: Always specify stoker model number. 401 SERIES PNEUMATIC SPREADER STOKER FIG. NO. 3 3 3 3 3 3 3 3 3 3 * 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 '3 .3 3 3 3 3 3 3 3 3 3 3 3 3 * 3 3 3 3 PARTS LIST II COMPONENT PARTS OF PS GEAR CASE ASSEMBLIES PART NUMBER PART NAME A-1 16 PS-2025 PS-2184 PS-2240 PS-2271 PS-2272 PS-2273 PS-2274 _ PS-2275 PS-2276 PS-2292 40029 40030 4003 1 40036 40048 4006 I 40062 40063 40064 40066 40069 40073 40074 40075 40076 40078 40085 40086 40091 40093 40094 40100 40101 40106 40109 40110 4011 I 40 112 40116 40124 40125 40126 40129 40136 40152 40153 40154 40155 40163 40 168 40173 40176 40 181 40182 50009 50010 Ball Bearing (N.0.-7505). . . . Drive Sprocket - 21 Teeth . Used on Model PS-400 only. Quadrant ............................................................. Drive Sprocket - 16 Teeth . Used on Model PS-300 only. Cam............................................................................. Cam............................................................................. Cam............................................................................. Cam........................................................................... Cam............................................................................. Cam............................................................................. Cam Adjusting Washer ............................... Collector Plate............................................. Finger Spring ............................................. Shoulder Screw.............................................. Bearing Stop Cover Shim . Spring Key...................................................... Cam Fol1ower..................................................... Cam Roller . . ..................................... Cam Roller Stud. . , Spring. ............................................................ Coal Feed Quadrant Arm.... Air Adjustment Quadrant Arm. Air Adjustment Sheave. .... Eccentric Bushing ..................................... Air Adjustment Pivot Screw . Air Adjustment Spacer.................... Air Adjustment Washer.................... Plug................................................................... Plug................................................................... Overload Release Pin............................... Ball Bearing (N.D. 7507). . .. Ball Bearing (N.D. 55507) Ball Bearing (N.D. 7506). Ball Bearing (N.D. 88035) Oil Seal (Nat. 140328).... Oil Seal (Vital ic 6318) . . . . Bearing (Oil ite A-956).... Bearing (Oilite T-I303-!) . . . Bearing (0i1ite)...................................... Bearing (Oilite A-1167-2) . . . Retainer Ring (Eaton International) Retainer Ring (Eaton International) Retainer Ring (Waldes Truarc) . Knob .................................................................... Low Speed Shaft Key ............................... Washer (ABEC-W-07)..................................... Lock Nut (ABEC-N-07)............................. Acorn Nut - Upper ..................................... Acorn Nut - Lower ..................................... Oil Gauge............................................................ Key........................................................................... Chain Retainer Pulley............................... Name Plate..................................................... Quadrant Arm Stop...................................... Retainer Screw............................................. Gear Case........................................................... Gear Case Cover. ...... * Not illustrated. IMPORTANT: Always specify stoker model number. File No. 7-401 Page 15 QUAN. REQ'D As Req u i red 3 As Required 3 1 2 2 I 4 I I I 3 1 2 2 1 2 1 3 3 2 File No. 7-401 Page 16 401 SERIES PNEUMATIC SPREADER STOKER FIG. NO. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 PART HUMBER PART NAME 500 12 500 13 500 14 50015 50016 50017 50018 50019 50020 50023 50024 50025 50026 50028 50029 50030 50031 50033 50034 50035 50036 50037 50038 50039 50040 50041 50042 50043 500 4 4 50045 50046 50 0 47 50050 50057 50058 50059 50060 50061 50062 50063 50064 50065 50066 50067 50068 50069 50070 50071 50072 50073 50075 50077 50085 50089 50093 50115 50118 50120 50121 50 122 50123 50124 Main Worm Shaft...................................................................................................................................... Main Worm Gear...................................................................................................................................... Differential Worm Shaft................................................................................................................ Differential Worm Gear................................................................................................................ Low Speed Shaft...................................................................................................................................... Spacer....................................................................................................................... ....... Internal Gear...................................................................................................................................... Sun Pinion Gear...................................................................................................................................... Spider Assembly...................................................................................................................................... Planet Gear............................................................................................................................................. Inner Spider............................................................................................................................................. Thrust Washer ...................................................................................................................................... Thrust Washer . . . ................................................................................................................. . ._ Back Gear Hub ...................................................................................................................................... Spring....................................................................................................................... ....... Drive Shaft Key...................................................................................................................................... Drive Shaft............................................................................................................................................. Drive Shaft Shim .............................................................................................................................. Drive Sprocket - II Teeth ........................................................................................................ Used on PS-50, 75, 110, 160 and 200. Shear Pin. . ...................................................................................................................................... Shear Pin Retainer.............................................................................................................................. Main Worm Bearing Retainer ........................................................................................................ Differential Worm Bearing Retainer .................................................................................. Main Worm Bearing Retainer Gasket......................................................................................... Differential Worm Bearing Retainer Gasket .... ...................................... Input Sheave............................................................................................................................................. SI iding Sheave...................................................................................................................................... Adjusting Sheave ....... ........................................................................... Bearing Housing.......................................................................... ........................................................... Sheave Drive Pin .............................................................................................................................. Bushing ..................................................................................................................................................... Belt Shifter Support ....................................................................................................................... Belt Shifter Assembly....................................................................................................................... Consists of: 1 - 5009 7 Belt Shifter - Front Half 1 - 50098 Belt Shifter - Rear Half Spring Washer ...................................................................................................................................... Spring Washer ......................................................................................... ............................................ Oil Seal Housing .............................................................................................................................. Snap Ring.................................................................................................................................................... Ball Bearing (N.D. 7607)............................................................................................................... Ball Bearing (N.D. 5507)............................................................................................................... Ball Bearing (N.D. 993L09) ........................................................................................................ Needle Bearing (Tor. B-I2I0X) ..... ............................................................ Needle Bearing (Tor. B-24I4X0H)......................................................................................... Bearing (Oilite A-1213-2).......................................................................... ....... Bearing (Oilite A-1623)............................................................................................................... Oil Seal (Nat. 50135)...................................................................................................................... Oil Seal (Nat. 50 4 52)...................................................................................................................... Oil Seal (Nat. 50055-S)............................................................................................................... Retainer Ring (Wal. NAS 51-175) ......................................................................................... Retainer Ring (Wal. No. 51-325)................................................................................. Retainer Ring (Wal. NAS 51-118)......................................................................................... Retainer Ring (Wal. NAS 50-300)......................................................................................... Wide V Belt............................................................................................................................................ Lock Washer ............................................................................................................................................ Oil Distributor....................................................................................................................... ....... . Oil Distributor Chain......................................................................................... ....... Dowel Pin.................................................... .......................................................... Gear .... .............................................................................................................................. Oil Elevating Pulley ...................................................................................................................... Chain Retainer Pulley Screw........................................................................................................ Cover Bearing Stop.............................................................................................................................. Case Bearing Stop .............................................................................................................................. QUAN. REQ'D 1 1 1 1 1 1 1 1 1 3 1 1 1 1 3 1 1 As Required 1 As Required 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 1 1 1 1 2 6 2 2 1 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 1 1 As Required IMPORTANT: Always specify stoker model number. 401 SERIES PNEUMATIC SPREADER STOKER FIG. HO. 3 3 3 3 PART NUMBER 50125 50126 50129 50139 PART NAME Worm Wheel Shim.............................. Pointer............................................. Internal Gear Bearing Retainer Overload Switch Assembly, Consl sts of: I-- 40079 Box I - 40080 Actuator Lever I - 40083 Spring I - 40084 Spring I - 40115 Beari ng I - 40130 Nut I - 40 134 Insulation I - 50 116 Reset Lever I - 50117 Reset Spacer I - 50138 Conduit 1 - 50230 Switch Asm. 2 - 80263 Anti-Short Bushing I - 8 1472 90 Connector File No. 7-401 Page 17 QUAN. REQ'D As Required 2 Figure 9 - PG-4C Undergrate Fan Unit - Refer to Parts List III (Pg 21) file IV). 7-401 Page 18 401 SERIES PNEUMATIC SPREADER STOKER -* j | ;I . I-! J Figure 10 - PG-50, 51, 52 and 53 Single Undergrate Fan Units - Refer to Parts List III (Pi 21) l i! i . !l is' i Figure 11 - Duplex Fan Unit - Refer to Parts List III (Pg 21) IMPORTANT: Always specify stoker model number. 40 I SERIES PNEUMATIC SPREADER S10KER tile No. 7-401 Page 19 Figure 13 - Volumeter Air Duct Parts - Refer to Parts List III (Pg 21) IMPORTANT: Always specify stoker model number Page 20 --r\j t UUIt I 1-0 rtC-UHA 1 I U orntAULK OlUKtK 3 <C 0D2<- O> n iv 0 no. x* H)|CUZ IT oin < ~ [lev <tr X 9 in Cl jug < u ri pi m Oa X z Ln Q<o ion ViMn a> iV xoy => * 5 Q9a<2 >Uu(jJ 20 0O 9X CX z oto g r- in IV o itno > - aa: *1 u-jj o> zu 1<- IT. 0 iv tn X X Oa. in mO N CQ (V mm m> *. o , _ tn s igso 00. ZT u a: oa. f- Oo om h- (V s 0.0" > o " Oa. U-jJ <o o> zu H< O </l 0 Xo d z in oto O r* s to N ion > Q Ul a: -J <u 0 t<- m 0 cv JI S <5 m ton tVn n s N V N Xin " - o ggS m X l a /> o 0 o m r in A N n iXn o Xin O *e g Oce U_Ji IS 0<- oIO mo z o x to too omr> s L in > u a -i < 5 H0 X <a5. X mN Otn ev L ** iXn - to - as tno oto N CD - iXn - 00 to to - t#nv to oto <too r in 9 - m X - to o oo .V ttOo - nO - m 9 - Xin 0 ou -0 0 IV in V s <9n <V to i0*l Xin CO - in X - 0 0 to 0 in n <v g r- IV in ID 0 - 0 X X ftl - to 0 0 l 0 0 ~ Oo e s (V in O to to - X - 0 0 tsl - in A -x ri v o<0 ID - j>* m 0 in - 0 0 X - tn e in too - <o N r- m ffi 0 - 0 o 0 01 X - O in to 0 0 -0 o o -0 X - m oto 0 r - in 0 - X0 - 0 0 0 0 Lo :n 0. -ug 0. o tt* tn <05. I O ton to in v Xin - 0 m(V IV o to 0 - In 0 - X 0 o o -0 C UJ ( ~J <o a > zo < t- o in id 9 a X O oin 1a5. *0 >) - m - s u_jl <o V> zu H< m in <m X X X s O V - ? tXn jMjO lXn <jW o9 X X 9, o S 1X5 9 to o tn o n - X sO UJ _j <9 > z J<- <X5 11 Oto oin ! o 'jC Sin to TI tXn in id - o n o<o 00 - - ffi 0X 0 o o 0 - in m to in - - to Xin 0 X 8 0 m r~. - IV r~ to tn Xin <o - 0X - o =o - \ m (V o a n* o - in m a X0 - ;1 >1 or s I 8 5 o*in JO O 115" 2" Si S0 UJ < <tr5 Ul z 3Z < o^ Ux>J _>J 2 UJ in in UJ O X >- in < { U. lX- o z X XO . o Z Ui>nJ a 15 ><UJ Z in uu o >O o a zo aUJ m 9 o UJ coc o tz, u *zu Ji 3 o o z X0 O uj > OO oz o 0 o 2 X 0 o < UJ t- z z -_Jl 9< 1 la a>. 1z5 -oj > O ** ui i<n X x X 0> tn -) U9J z< x< U--J z < < !o -- ^ it- a *v g 0 IMPORTANT. Always specify stoker model number FIG. NO. 12 10 Si 10 * 12 12 12 12 11 12 9 * 9 10 13 13 .2 9 9 401 SERIES PNEUMATIC SPREADER STOKER -File No. 7-401 Page 21 PARTS LIST III COMPONENT PARTS OF UNDERGRATE FAN UN ITS AND VOLUMETER AIR DUCT ASSEMBLIES. SEE TABLE II FOR USAGE AND DATA REGARDING UNDERGRATE FANS. PART NUMBER A-85 C-80R C-86 PF-0020 PF-0022 PF-0023 PF-0025 PF-0206 PF-0219 PF-0235 PS-120 PS- 12IR PS-I22R PS-13 I PS-158 PS-187 PS-257 PS-325 PS-368 PS-372 PS-379VR PS-381VR PS-390 PS-395 PS-396 PART NAME Felt Washer Drive End . Fan Wheel Assembly . Consists of: I -- C-80 Fan Hub I - V--561 | Fan Wheel Spacer I - V-56I3A Fan Wheel - 4 x 14-1/2 in. I - V-56I4A Fan Wheel - 7 x 14-1/2 in. Felt Washer Drive End ............................ 1/2-IN x 1-3/4-In. Nipple . . . . 1/2- IN x 3 In. Nipple.............................. 1/2- IN x N In. Nipple............................ I- IN x IS-3/N Pipe................................... 90 Ell .............................................................. Cable Pipe ....................................................... Bushing - l/N-in. x l/2-in. . . . Fan Shaft................................................ Fan Wheel '- R.H. .......................................... 7 in. x 14-1/2 in. Fan Wheel - L.H. ......................................... 7 in. x 14-1/2 in. Fan Shaft Bearing......................................... Lower Tie Strap ......................................... Fan Sheave ....................................................... Motor Spacing Bar......................................... Belt Guard Spacer. ...... Motor Plate....................................................... Belt Guard ....................................................... Air Duct and Volumeter Assembly . Consi sts of: PS-379 Air Duct PS-389 Volumeter Air Tube PS-736 Volumeter Diaphragm V-2318 Regulator Rod Quadrant V--5 I35A Regulator Panel V-5317 Volumeter Lower Housing V-5823 Regulator Damper Rod V-5835A Volumeter Upper Housing V-6524 Diaphragm Piston Rod V-6526 Piston Rod Yoke V--6527 Yoke Pin V--6535 Regulator Blade Air Duct and Volumeter Assembly . Cons i sts of: - PS-252 Regulator Damper Rod - PS-255 Volumeter Air Tube - PS-38 I Air Duct - PS-734 Regulator 8lade - PS-736 Volumeter Diaphragm - V-2318 Regulator Rod Quadrant - V-5 185A Regulator Panel - V-5317 Lower Volumeter Housing - V-5835A Upper Volumeter Housing - V-6524 Diaphragm Piston Rod - V-6526 Piston Rod Yoke - V-6527 Yoke Pin Fan Inlet Ring................................................ Fan Wheel ....................................................... Fan Housing.................................. . . . QUAN. REQ'D PG PG PG PG PG NC 50 51 52 53 1 2222 1 2 1 1 22 2 1 1 1 22 2 2 NN 1 1 1 22 1 122 1 1 22 1 1 22 1 1 22 1 22NN 22 2 2 1 1 1 1 1 1 22 222NN 1 1 * Not 11 lust rated. IMPORTANT: Always specify stoker model number File No. 7-401 P^ge 22 FIG. NO. PART NUMBER 401 SERIES PNEUMATIC SPREADER STOKER PART NAME 9 PS-400 9 PS-416 10 PS-422 9 PS-424 9 PS-475 10 PS-476 9410 9 13 PS-461 PS-482 PS-I0I8VR 13 PS-1020 9& 10 10 9 10 10 10 12 II 9410 9410 9410 9410 10 10 PS- 2265 PS- 2278 PS- 2279 PS- 2281 PS- 2282 PS- 2296 PS- 2366 PS- 2367 PS- 2369 PS- 2371 PS- 2372 PS- 2375 PS- 2392 PS- 2393 Belt Guard Spacer................................................................... Motor Sheave ........................................................................... Motor Sheave ........................................................................... Belt Guard ..... ............................................. Fan Housing Assembly............................................................ Consists of: I - PS-352 Lower Tie Plate 1 - PS-354A Body Sheet 8 - PS-356 Tie Rod 2 - PS-357 Body Sheet Gasket 1 - PS-477 Leg - R. H. J_ - PS-478 Leg - l\ H. Fan Housing.................................................................................. Consists of: 2 - PS-357 Body Sheet Gasket I - PS-364 Body Sheet 8 - PS-366 Tie Rod I - PS-477A Leg - R. H. I - PS-478 A Leg - L.H. Indicator Vane Rod Bearing Plate.............................. Indicator Vane Rod ............................................................ Air. Duct and Volumeter Assembly - 24 In. Long Consists of: I - PS-389 Volumeter Air Tube I - PS-736 Volumeter Diaphragm I - PS-10 19 Air Duct - 24 in. Long I - V-2318 Regulator Rod Quadrant I - V-5I85A Regulator Panel I - V-53 17 Volumeter Lower Housing I - V-5823 Regulator Damper Rod | _ V-5835A Volumeter Upper Housing I - V-6524 Diaphragm Piston Rod I - V-6526 Piston Rod Yoke I - V-6 527 Yoke Pin I - V-6535 Regulator Blade Air Duct and Volumeter Assembly - 24 In. Long Consists of: I - PS-252 Regulator Damper Rod I - PS-255 Volumeter Air Tube I - PS-734 Regulator Blade I - PS-736 Volumeter Diaphragm I - PS-1021 Air Duct - 24 in. Long I - V-2318 Regulator Rod Quadrant I - V-5 185A Regulator Panel I - V-5317 Lower Volumeter Housing I - V-5835A Upper Volumeter Housing I - V-6524 Diaphragm Piston Rod I - V-6526 Piston Rod Yoke I - V-6527 Yoke Pin Indicator Vane Frame............................................................ Indicator Vane Plate............................................................ Indicator Vane Plate............................................................ Indicator Vane Rod ............................................................ Indicator Vane Rod ............................................................ Indicator Valve ................................................................... Fan Sheave .................................................................................. Belt Guard .............................. ....... Indicator Cable ................................................................... Cable Connector ................................................................... Pipe Bracket .......................................................................... Sheave Housing Bracket .................................................... Motor Plate................................................................................ Indicator Air Tube ............................................................ As required IMPORTANT: Always specify stoker model number QUAN. Rbp'D PG PG PG PG 4C 51 52 53 1 FIG. NO. 11 * 12 PART NUMBER PS-2394 PS-2395 PS- 2458 9& 10 9a!0 12 12 12 12 10 10 to 11 12 12 12 12 11 10 9& ID 9il0 9& 10 9410 V-l 11 V-524 V-620 V-623 V-624 V-779 V-0222 V-0225 V-0233 V-5020 V-5507 V-5508 V-5512 V-5524 V-5553 V-b6 16 41436 41473 41477 41526 9,10411 10 10 51123 51466 51467 9 PS-377 12 PS-421 * PS-4 25 * PS-426 * PS-427 9 PS-430 9 PS-432 9 PS-434 9 PS-435 Motor 401 SERIES PNEUMATIC SPREADER STOKER PART NAME Belt - Goodyear B-62.......................................................................................... Button Plua............................................................................................................... Fan Shaft Assembly .......................................................................................... Consists of: 1 - PS- 13 1 Bear i ng 1 - PS-367 Fan Shaft Fan Screen.......................................................................................... Fan Screen Ring ................................................................................................. Bearing Cover Plate .......................................................................................... Bearing Retainer ................................................................................................. Bearing Cover Plate - Drive End .......... Bearing Retainer - Drive End.................................. .................................. Motor Plate "Spacer.......................................................................................... l/2-in. dia. x l/4-in. pipe Motor Plate Spacer .......................................................................................... l/2-in. dia. x 5/8-in. pipe Motor Plate Spacer . ................................................................................... 1/2-in. dia. x 1-5/8-in. pipe Motor Sheave ... ................................................................................... Bearing Retainer - Drive End .............................................................. Bearing Retainer ................................................................................................ Bearing Retainer Washer.................................................................................. Fan Shaft Nut . .......................................................................................... Motor Sheave ....................................................................................................... Motor Sheave ....................................................................................................... Indicator Valve Body Weight ..................................................................... Indicator Valve ................................................................................................ Indicator Valve Body. . ............................................................................ Housing and Sheave Assembly ......................................... .... Consi sts of: 1 - 40076 Spacer 2 - 40 078 Washer 1 - 41231 Sheave Housing 1 - 41232 Sheave Housing Cover 1 - 41527 Cable Sheave Belt - Goodyear B-bO................................................ ...................................... Air Tube Elbow ................................................................................................ Air Tube Connector............................ ...... ...................................................... PARTS USED WITH 25 CYCLE MOTOR ON PG-4C FAN UNIT Motor Sheave ....................................................................................................... Auxiliary Fan Housing Inner Plate ....................................................... Auxiliary Fan Housing Band........................................................................... Auxiliary Fan Housing Outer Plate ....................................................... 1- i n. x 14- 1/ 2- i n. Belt Guard......................................................................................... ....... Motor Spacing Bar................................................................................................ Belt - Gates #3680 ......................................................................................... 1 H.P.-I450 R.P.M., 220 Volt, 25 Cycle, 3 Phase, BallBearing K-224 Frame -tile No. 7-401 Page 23 QUaN. REQ'D PG PG PG PG PG 4C bO 51 52 Si 2 i 1 22 1 1 i 1 22 1 i 1 22 1 i 1 22 1 i 1 22 2 .2 2 4 4 1 1 22 44 4 4 1 2 1 1 22 1 1 22 1 122 1 1 122 1 1 1 1 122 11111 1 1 1 22 1 1 1 22 1 111 1 122 336b 1 1 1 1 1 1 1 2 1 PARTS USED WITH 60 CYCLE OVERSPEED ON PG-4C FAN UNIT 9 PS-377 10 PS-421 9 PS-432 9 PS-434 9 PS-435 Motor Motor Plate......................................... ............................................... ...... Motor Sheave ..................................................................... ...... Belt." Guard.............................................................................................................. Motor Spacing Bar................................................................................................ Belt - Gates #3680 . . ............................................................................ 2 H.P., 1750 R.P.M., 220 Volt, 60 Cycle, 3 Phase, K-224 Frame ' Not 11 lustrated. 1 1 1 2 1 IMPORTANT: Always specify stoker model number File No. 7-401 Page 24 MO I SERIES PNEUMATIC SPREADER STOKER FIG. NO. PART NUMBER PART NAME OPTIONAL AIR DUCT EXTENSIONS AND ELBOWS FOR UNDERGRATE FAN UNITS PS-923 Air Duct Extension - 24-In................................ * PS-927 PS-885 PS-889 PS-893 PS-898 Air Duct Extension - 48-In................................................................................ 45 Elbow - Horizontal.................................................................................. 45 Elbow - Horizontal. .... ....................................................... 90 Elbow - Horizontal. ........................................................................... 90 Elbow - Horizontal......................................................................................... PS-903 Vertical Elbow - Rectangular Outlet .... ............................ PS-907 PS-911 PS-919 PS-925 PS-929 Vertical Elbow - Rectangular Outlet .................................. ... Vertical Elbow - Square Outlet .................................................................... Vertical Elbow - Side Outlet........................................................................... A-fr Duct Extension - 24-In. ........ . ... Air Duct Extension - 48-In................................ ...... ........................................ * Not illustrated ** /is Required QUAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 ** * PARTS LIST IV COMPONENT PARTS OF PS-2470 REPLACEMENT CONVEYOR FAN ASSEMBLY FIG. NO. PART NO. PART NAME QUAN. REQ'D PF-0225 Butt Nipple - 3/4-14 X I" Long-Straight Pipe Thread (Not Illustrated) . PF-0358 Nipple - 1/4" X 6" Long-For PS-2098 Fan Shaft Oiler (Not Illustrated) . 4 PS-2097 Seal Ring .......................................................................................................................................... 4 PS-2098 Fan Shaft Oiler............................................................................................................................. 4 PS-2099 Breather Tube............................................................................................................................... 4 PS-2100 Water Cooled Bearing Retainer ........................................................................................... 4 PS-2102 Leveling Studs................................................................................................................................. 3 4 PS-2103 Fan Spacer.......................................................................................................................................... 3 4 PS-2111 Fan Inlet Plate ............................................................................................................................ 4 PS-2114 First Stage Liner ......................................................................... .......... 4 PS-2116 Fan Interstage................................ .... ................................................. ........................................ 4 PS-2117 Second Stage Liner................................. ..................................................................................... 4 PS-2119 Conveyor Fan Housing.................................................................................................................. 4 PS-2123 Back Plate Insulation - 3/8" Thick.................................................................................. 4 PS-2125 Insulation Cover Sheet................................ ............................................................................ 4 PS-2132 Wrapper Sheet.................................................................... .......................................................... 4 PS-2160 Fan Bearing Housing Support ............................................................................................... 4 PS-2176 Balancing Hub Assembly.............................................................................................................. 4 PS-2350 Seal Plate......................................................................................................................................... 4 PS-2353 Dust Check Ring........................................................................ 4 PS-2410 Retainer Ring................... ........................................................................................................... 4 PS-2434 Fan Wheel ......................................................................................................................................... 4 PS-2461 Balance Ring..................................................................................................................................... 4 PS-2462 Inner Balance Ring. . ............................................................................................................... 4 PS-2463 Fan Bearing Housing ................................................................................................................. 4 PS-2465 Gasket.................................................................................................................................................. 4 PS-2468 Fan Shaft Assembly....................................................................................................................... Consists of: 4 - 40120 Retainer Ring I - 38298 Spacer 1 - PS-2105 Fan Shaft I - PS-2466 Bearing -N.D. 2 - PS-2460 Oiler Guide #97507 I _ PS-2467 Bearing - N.D. #97607 4 PS-2484 Fan Housing Seal................................. .......................... .... .......................................................... 4 PS-2485 Fan Housing Seal............................................................................................................................ 4 40048 Key ....................................................................................................................................................... 80348 Flare Nut (Not Illustrated) ............................................................................................... 4 80689 Brass Elbow............................................................................................ ....................................... 2 2 2 2 IMPORTANT: Always specify stoker model number 401 SERIES PNEUMATIC SPREADER STOKER Kile No. 7-401 Page 25 Figure 14 - PS-2413 Nozzle Assembly - Refer to Parts List I (Pi 10) PS-2386 V-5252 NEW TYPE SHAFT AND BEARING PARTS Figure 15 - Coal Agitator Parts - Refer to Parts List I (Pg 10) IMPORTANT: -'./wavs specify stoner model number fxi? ino. <-4ui Page 26 4UI StKItS KNfcUMAlIC SPREADER STOKER Figure 16 - Viscellaneous Parts - Refer to Parts List I (Pg 10) IRPORTART: Always specifv stoker model numbe * IHPORTART: Always specify stoker model number FRONT GRATE SUPPORT CHANNEL IF ig u re 17 - Dump G ra te P a rts - R e fe r t o P a rts L i s t (P g 1 0 ) rite* i\o r-4-Ui Page 28 401 SfcKIES PNtUMAIIC SKKfcAOtK SIOKtR F ig u re 18 - S ta tio n a ry G rate P arts - R efer to P arts L is t I (P i 10) LlI CO Ui o IMPORTANT: Always specify stoker model number File No. 7-401 V REPLACEMENT PARTS 401 Series Pneumatic Spreader Stokers CONVEYOR FAN ASH. C(Soemepofnigeuntrefa4rtf*o.)r Figure 1 --PS-401 Series Pneumatic Spreader Stoker - Refer to Parts List I (Pg 10) MODELS COVERED - 1949-1964 MODEL PS-75 PS- 110 PS-160 MODEL PS-200 PS-300 PS-400 IUPORTAHT: Always specify stoker model number and serial number when ordering. GENERAL. Replacement parts for the 401 Series Pneumatic Spreader Stokers are listed and illus trated in this catalog. These units were first produced in 1949. UNDERRATE FAN UNITS. These units were equipped with undergrate fan units and an air duct with volumeter. Refer to Table II, page 15, for usage of the items. Refer to figures 9, 10, 11, 12 and 13 and to Parts List III for identification of parts. GRATE PARTS. These stokers were equipped with either stationary-type grates or power-operated dump grates. Refer to figures 16, 17 and 18 and to Parts List I for identification of parts. THE WILL-BURT COMPANY ORRVILLE, OHIO, U.S.A. Printed in U.S.A. Form No. 1986A Pile No. 7-401 P?7e 2 * LIST OF CONTENTS PARTSLISTS Page Parts List I - Standard, Optional andExtraEquipment.......................................................... 10 Parts List II - PS Gear Case Assembly......................................................................................... 15 Parts LiscIII - Undergrate Fan Units and Air Duct Parts.....................................21 Parts List IV - Conveying Fan Assembly................................................................................. 24 TABLES Table I - Stoker and Conveying Fan Drive Data........................................................... 9 Table II - Undergrate Fan Data.............................................................................................................. 20 LIST OF ILLUSTRATIONS Figure 1 - PS-401 Series Pneumatic SpreaderStoker .................................................... 1 Figure 2 - Front View of Stoker.............................................................................................. 3 Figure 3 - PS Gear Case Assembly................................................................................................ 4&5 Figure 4- Train View of Conveyor Fan Parts..................................................................... 6 Figure 5 - Coal Drier Parts............................................................................................................ 7 Figure 6 - Obstruction Guide and Cleanout Parts ........................................................ 7 Figure 7 - Conveyor Elbow Assemblies .............................................................................. 8 Figure 8 - Transfer Housing Cleanout Parts .................................................................. 8 Figure 9 - PG-4C Undergrate Fan Unit....................................................................................... 17 Figure 10 - PG-50, 51, 52 and 5'3 SingleUndergrate Fan Units . 18 Figure 11 - Duplex Undergrate Fan Unit...........................................................................................18 Figure 12 - Internal Parts of Undergrate Fan Units ...................................................... 19 Figure 13 - Volumeter Air Duct Parts.................................................................................................. 19 Figure 14 - PS-2413 Nozzle Assembly ........................................................................................... 25 Figure 15 - Coal Agitator Parts.......................................................................................................... 25 Figure 16 - Miscellaneous Parts .................................................................................................. 26 Figure 17 - Dump Grate Parts..................................................................................................................27 Figure 18 - Stationary Grate Parts .......................................................................................... 28 401 SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 3 co os oo ZD < O Q- P -- St CO o> CT> O) o CVI O o OJ o OJ OJ CO __ CO CO Q_ LT) a. a. UJ X O <CO o O) CM 00 oID oOl "-- CM OJ CM F ig u re 2 - F ro n t View o f S to k e r - R e fe r to P a rts L i s t (P g 1 0 )I oo __ CM CM kO CM CM CM CO OJ CM CM CM 111 CO CO CO CO a. 0- a. a- CO O) CO CO -- -- CM 1 CM i UJ CO CO Q_ 0- si1O-- LU 3* ID a> st -- -- -- CM OJ CM 0J CM CM CM 11 CO CO CO CO a_ a_ a. a. CO CO o cr> -- ID LO OJ 00 CO CM OJ CM 1_ CO CO CO CL. If) Q_ a. OJ CO ST to <o r*- CO 3 -- o o o o o o UJ a. CO CO CO CO CO CO CO u. OJ 1 CVI CVI CM CM OJ < o c3s 0) CO CO CO CO CO CO c a_ Q_ O- Q_ a. Q_ X o St ST CO -- o CM 1 CO a. IMPORTANT: Always specify stoner model number. me .'y, i-W] Page 4 401 SERIES PNEUMATIC SPREADER STOKER Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IMPORTANT: Always specify stoker model number. IW-UI in I l W ot I V LhU L_ I \ Olur\LI\ 40091 40109 1 X 1C Kl IV X Page 5 Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IMPORTANT: Always specify stoker model number. file INo. 7-401 Page 6 401 SERIES PNEUMATIC SPREADER STOKER SEE PARTS L IS T I FOR COUPLING PARTS COUPLING PARTS NEW TYPE AIR DUCT PS-2131 GASKET-* J" t; C? * 4c>. WC -2 * 5 CD *3 *8 ^w 3 tH to '; <VJ} CC a. 3 tfa. C*k>s v.^ AT: Always specify sto&er model number. no I SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 7 Figure 5 - Coal Drier Parts - Refer to Parts List I (Pg 10) Figure 6 - Obstruction Guide and Cleanout Parts - Refer to Parts List I (Pg 10) IHPORTAHT: Always specify stoker model number. File No. 7-401 401 SERIES PNEUMATIC SPREADER STOKER Figure 7 - Conveyor Elbow Assenhlies - Refer to.Parts List I (Pg 10) Figure 8 - Transfer Housing Cleanout Parts - Refer to Parts List I (Pg 10) IEPORTAHT: Always specify stoker model number. TABLE I STOKER AND CONVEYING FAN D R IV E DATA PS - 75 -1 10-160 PS-200 PS-300 STANDARD OPTIONAL STANDARD OPTIONAL OVER SPEED FAN DRIVE 1 -1 /4 1 PS-2456 1 2 /1 -9 1 6-0 1 __________ g / l - A _______ 1 SSPZ-Sd 1 ! oo 10 0. z s <J> z z s L. NO. 1 STANDARD .NO. 2 NO. 3 NO. 4 NO. 2 NO. 3 OPTIONAL USING 200-PS FAN DRIVE OPTIONAL OPTIONAL USING USING STANDARD 300-PS 400-PS OPTIONAL USING 300-PS FAN DRIVE NO. 4 OPTIONAL USING 4 0 0 -PS FAN DRIVE NO. 3 NO. 4 NO. 3 NO. 4 OVER SPEED FAN DRIVE FAN DRIVE ,FAN DRIVE 7 -1 /2 1| P S -2455 | P S -2457 | 7 -1 /2 PS - 2457 1 3660 1 4000 | PS-2361 |I PS-2220 B-93 ] PS 2104 | P S -2215 || PS-2 1 0 4 j iO<n? CJ in cl in eo in <<M \ iCnL in c CM CM ID *CC0MO s ian. m CL CM CO \CM Or)* CM to CD ion |I | i / ____ 1 in? CM ian. \CM in in \CO CM in CL PS-2456 1 3 -1 /4 to CM ooo t o CJ rCM (M CM O) CM 'O ain. m ottDo co oOin 1 || ___________________________ . PS-2455 in in in rCfJ in a. Lh IZm5 PS-2456 in CM CM in <o to CO CM in CcOn t CD CM o oo cl CL \ CO O \CM CM o CM CM CM O) CM totoo in ID in CO CO a CL 6 -1 /2 1 1 |1 1 11 11 1 1 |I | PS - 2150 B-60 PS-2276 PS-2025 21.0 1I | | CM CD CM 1 | to O CM CO CM ________ _____09 1 oto CD ^f cn 00 - O o CM CO CM in CM CM co in in o CO CL 0. PS-2091 50041 L l/1 PS-2150 PS - 2275 50034 1 P S -2220 1 PS-2361 1| PS-2221 | PS-221 5 I 10-7/8 | | PS-2453 | 1 PS - 24 52 |! in to o CD CM ion CO CM CO 1 1 II ( 7 .6 -P S -7 5 ) (1 1 . I-P S -1 10) ( 1 6 . 3 - P S -160) I PS - 2091 ________________________ ___________________________ PS-2118 1 |1 | PS-2452 | 1 PS-2449 | | PS-2 1 8 9 |1 PS-24 5 3 ] 1 9 -7 /8 | | PS-2104 in in CM CM to iinn cm in CL in tino It \ ian. CM in \CO SCM in CL CO CM in CL CJ \ to CcOn CM Oo CO o <t r- CJ) JM too <o CD CO in in CO CO in CL - CO in \ h' CM CJ to O in CL IT CM CM to in CL PS - 2221 CM o O) CD o - cInf CM | 3250 50041 L IU PS-2150 B-60 o CO ain. T r** CM CM in 0. o ain. If CO CrO- CM O iOn - CM in CL in r* in CrvM CM CM ian. O to in CL to o co in in CL T in r^ ian. o CO 1 1 1 . oo o d o > h- .z .* X z L- cr. o CO o z . u. o 6 z L. o o z U. LJ M-- in Z <~) d z L. , 2 Q_ 2 in cc in < {hX)- CM > X <r til o X >- o cr o o K o r> cc LJ ?in 22 2< o H H>I < HI LU > X< in Hi cr. Xin o Hzz O<< 2 (L L- --os o-cJr iyn f-- o o LJ co LJ z a_)l << L_ u 2 CL o: IU > < LJ o LJ iXn LaJ. CL in LXLJ z < Li_ 1in- o d z LJ N o L -- in .O X o on zX zXzj H h- X L- LJ 1LJ- 2 u_ LJ LhJ* Lu j- CL <X cr h* 2 u XUJLj 1- LJ uo z 2 CL CC ILDJ cr LI LJ < o X iCnL LJ in z LJ < X (J u 2 O X cr > > _! QLO H in < hi l> ~ --* cr QD --< c: oU IMPORTANT: Always specify stoker model number. 1 PS-2150 B- 60 PS-2276 PS-2240 PS-2091 PS-2069 12.0 1 PS - 2092 62 16.0 Page 9 File No. 7-401 Page 10 HO I SERIES PNEUMATIC SPREADER STOKER -- jt PARTS LIST I INCLUDES ALL STANDARD. OPTIONAL AND EXTRA PARTS FOR 401 SERIES PNEUMATIC SPREADER STOKERS. REFER TO PARTS LIST II FOR COMPONENT PARTS OF GEAR CASE ASSEMBLY NUMBERS SHOWN ON THIS LIST. REFER TO PARTS LIST III FOR COMPONENT PARTS OF UNDERGRATE FAN UNITS AND AIR DUCT ASSEMBLIES. REFER TO PARTS LIST I V FOR COMPONENT PARTS INCLUDED WITH REPLACEMENT CON VEYING FAN ASSEMBLY. REFER TO TABLE I FOR PARTS USED ON STANDARD AND OPTIONAL CONVEYING FAN AND STOKER DRIVE ARRANGEMENTS, FIG. HO. 9& 12 PART NUMBER PG-4C 10,1li 12 PG-50 10,11 & 12 PG-51 I0&I2 PG-52 10412 PG-53 8 PS-33 13 PS-379VR 13 PS-381VR 16 PS-468 16 PS-469 16 PS-487 16 PS-488 7 PS-53IR 7 PS-533R 17 17418 18 17 17 PS-800 PS-801 PS-802 PS-803 PS-805 PART NAME QUAN. REQ'D Undergrate Fan Unit.............................................. As Required Refer to Table II for usage. Refer to-Parts List III for component parts. Undergrate Fan Unit.............................................................................................................As Required Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit.............................................................................................................As Required Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit. . ......................................................................................... Refer to Table II for usage. Refer to Parts As Required List III for component parts. Undergrate Fan Unit......................................................................................... ...... . Refer to Table II for usage. Refer to Parts As Required List III for component parts. Hinge Eyebolt. ..................................................................... 2 Air Duct and Volumeter Assembly........................... ...... ........................................As Required Used with PG-4C Undergrate Fan Unit. Refer to Parts List III for component parts. Air Duct and Volumeter Assembly......................................... ...... As Required Used with PG-50, 51, 52 and 53 Undergrate Fan Units. Refer to Parts List III for component . parts. Standard Pin Hole Grate Bar - 8 x 24 In.......................................... As Required Standard Pin Hole Grate Bar - 8 x 36 In................................................................ As Required Grate Support I-Beam for Standard Pin Hole Grates, .......................... As Required (Specify number of notches and length required.) Grate Support Channel for Standard Pin Hole Grates ........................... As Required (Specify number of notches and length required.) Elbow Asm.. ......................................... As Required Consists of: 2 - PS-36 Handwheel Eyebolt I - PS-531 Elbow 1 - PS-532 Elbow Cover 2 - PS-560 Handwheel Elbow Asm.. ............................................................................................... As Required Consists of: 2 - PS-36 Handwheel Eyebolt I - PS-533 Elbow 1 - PS-534 Elbow Cover 2 - PS-560 Handwheel Dump Grate................................................................................................................................ As Required Front Grate ..... ...................................................... .... As Required Cleanout Door Assembly.....................................................................................................As Required Bearing Grate. ... As Required Side Grate Sleeve ............................................................................................................As Required IMPORTANT: Always specify stoker model number. 401 SERIES PNEUMATIC SPREADER STOKER FIG. NO. 17 I7&I8 17 17 17 18 16 PART NUMBER PS-806 PS-807 PS-808 PS-809 PS-810 PS-819 PS-822 16 PS-849 18 PS-859 IS PS-86T) 18 PS-943 18 PS- 1007 17 PS-10 10 17 PS-1013 13 PS-1018V 13 PS-1020 17 8 8 8 8 8 8 8 8 2,5A8 8 8 8 8 8 8 2 5 5 5 5 PS-1057 PS-2000 PS-2001 PS-2002 PS-2003 PS-2004 PS-2005 PS-2008 PS-2009 PS-20 II PS-2012 PS-2015 PS-2018 PS-2020 PS-2021 PS-2022 PS-2024 PS-2026 PS-2036 PS-2045 PS-2048 PS-2053 PS-206`1 PS-2065 PS-2069 PS-2070 PS-2073 PART NAME Side Grate Pin ............................................................................ Rear Grate.......................................................................................... Side Grate - L.H............................................................................ Side Grate - R.H. , ................................... ....... Grate Bar Bearing ..................................................................... Ash Wei I Grate.............................................................. ...... Hot Gas Outlet Assembly ....................................................... Consists of: I - PS-823 Hot Gas Outlet I - PS-824 Ai r Shutter Grate Support Assembly for Standard Pin Hole Grates (Specify number of notches and length required.) Stationary Grate - 36 In.......................................................... Stationary Grate - 24 In....................... ...... . . . . Side Plate................................................................................... Grate Leg Assembly ..................................................................... Dump Lever.......................................................................................... Pin Air Duct and Volumeter Assembly - 24 In. Long . Used with PG-4C Undergrate Fan Unit. Refer to Parts List III for component parts. Air Duct and Volumeter Assembly - 24 In. Long . Used with PG-50, 51, 52 and 53 Undergrate Fan Units. Refer to Parts List III for component parts. Seal Bar ............. Transfer Housing. ... ............................................. Transfer Cleanout Upper Cover ..................................... Transfer Cleanout Lower Cover ...................................... Transfer Housing Bottom Plate ...................................... Hand Latch........................................................................................ Upper Hinge Bar . ............................................................ Shoulder Screw .......................................................................... Lower Hinge Bar ........................................................................... Knob............................... .................................................................. Shutoff Gate .................................................................................. Gate Guide - L.H.......................................................................... Gate Guide - R.H.......................................................................... Shutoff Gate - Stuffing Box ............................................. Packing Nut Gland ................................................................... Shield Plate Assembly ............................................................ Coal Worm Bearing Housing. . .............................. Drier Inlet Housing................................................................... Drier Enclosure Assembly ........ Drier Sheet Assembly .................................................... Drier Cleanout Cover Assembly ...................................... Consi sts of: | _ V-690 Hand I e I - PS-2050 Cleanout Plate I - PS-2052 Insulation - 3/8 In. I - PS-2235 Insulation - 1/4 In. I - PS-2236 Gasket I - PS-2237 Retainer Plate Access Plate Assembly ........................................................... Consi sts of: I - PS-2054 Access Plate 1 - PS-2056 Access Plate Shield 2 - PS-2079 Insulation I - V-690 Handle Upper Damper Guide.................................................... ....... . Damper Blade .................................................................................. Chain ................................................................................................. (Used on PS-300 only.) Damper Adjusting Wheel Bracket ..................................... Drier Inlet Top Insulation ............................................. IKPORTART: Always specify stoker model number. ' `'Vile No. 7-401 Page 11 (JUAN. REIJ'D As Required As Required As Required As Required As Required As Required I As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required File No. 7-401 Page 12 FIG. NO. 5 5* 5* 5 5 1 2 2 2 2 2 4 4 4 4 4 4 4 2 4 4 4 4 2 4 4 4 4 4 4 4 5 2 2 2 2 2 4 2 2 8 8 4 4 PART NUMBER PS-2074 PS-2075 PS-2076 PS-2077 PS-2078 PS-2080 PS-2081 PS-2084 PS-2087 PS-2091 PS-209 2 PS-2093 PS-2094 PS-2095 PS-2097 PS-2098 PS-2099 PS-2100 PS-2102 PS-2103 PS-2104 PS-2111 PS-2114 PS-2116 PS-2117 PS-2118 PS-2119 PS-2123 PS-2124 PS-2125 PS-2127 PS-2131 PS-2132 PS-2137 PS-2138 PS-2139 PS-2142 PS-2147 PS-2150 PS-2160 PS-2171 PS-2172 PS-2173 PS-2174 PS-2175 PS-2176 16 PS-2177 2 PS-2210 2 PS-2213 2 PS-2214 2 PS-2215 2 PS-2219 HO I SERIES PNEUMATIC SPREADER STOKER PART NAME QUAN. REQ'D Drier Inlet Insulation ....................................................................................................... Drier Inlet Wrapper Sheet ........................................................................... ... Drier insulation ..................................................................................................................... 9" x 26" x 1-1/4" Lower Side Drier Insulation................................................................................................ Drier Insulation ... ................................................................................................ 3-1/4" x 26" x 1-1/4" Drier insulation Wrapper Sheet......................................................................................... Drier Coral Worm........................................................................... ................................................ Bin End Coal Worm.................................................................................................................... Motor Sheave Assembly (Obsolete - replace with PS-2455) ............................ Sprocket ......................................................................................................................................... Drive Chain . .............................................................. ...... ............................................... (Used on PS-400 only.) Seal Gasket.................................................................................. ...... ........................................ Thrust Bearing ........ .................................. ..... Fan Bearing Housing (Used With PS-2411 Fan Shaft Assembly) .... Seal Ring........................................................................... ............................................................. Fan Shaft Bearing Oiler ........................... . .............................................................. Fan Bearing Housing Vent......................................................................................... ...... Water-Cooled Bearing Retainer ......................................................................................... Fan Support Studs .................................................................................................................... Fan Spacer.................................................................................................................................. Fan Sheave .................................................................................................................................. (6- 1/2 in. 0. D. ) Fan Inlet Cover Plate. ....................................................................................................... First Stage Fan Liner (Also Order ( 1) PS-2485 1 ( 1) PS-2484 Fan Housing Seal) . Interstage Fan............................................................................................................. ...... . Second Stage Fan Liner (Also Order ( 1) PS-2485 Fan Housing Seal) . Drive Chain .................................................................................................................................. (Used on PS-75, 110, 160 and 200.) Conveyor Fan Housing.................................. .................................................................... Back Plate Insulation - 3/8 In. Thick .................................................................... Back Plate Insulation - 1/4 In. Thick .................................................................... Insulation Cover Sheet ...................................................................................................... Air Duct......................................... ...... ........................................................................................ Air Duct Gasket........................... ...... ........................................................................................ Wrapper Sheet ....................................................... ...... ............................................................ Drier Insulation - Fan Side............................................................................................... Motor Shaft Key - 2 In. Long........................................................................... ...... . Motor Sheave Key - 1 In. Long........................................................................................ Motor Plate ....................................................... ........... Gear Case Support .................................................................................................................... Gear Case Drive Belt ............................................................................................................. Fan Bearing Housing Support............................................................................................... Bearing Housing Gasket ...................................................................................................... Worm Housing Gasket ............................................................................................................. Bottom Plate Gasket ............................................................................. ..... Stuffing Box Gasket............................................................. ...... ........................................ Air Duct Clamp Gasket............................................................................................................. Balancing Hub Assembly ...................................................................................................... 1ncludes: 3 - PS-2362 Balancing Weight Coal Worm Sprocket Spanner ............................................................................................... Fan Drive Belt.................................................................... ..................................................... Used on Model PS-75. Motor Plate Hinge ...... ......................................... ..... Fan Sheave ................................................................................................................................. Used on Models PS-110 and PS-160. Fan Sheave ................................................................................................................................. Fan Sheave.................................. ...... ........................................................................................ Used on Model PS-75. * Not jllustrated. ** Refer to Table I for usage. 6 1 2 1 2 1 1 1 1 1 1 1 1 1 2 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 i *ft 1 ** ** IMPORTANT: Always specify stoker model number. 40 I SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 13 FIG. NO. PART NUMBER PART NAME QUAN, REQ'D 2 PS- 2220 Fail Or i.e Belt . 2 PS-2221 Fan Drive Belt . 2 PS-2222 Motor Sheave Assembly (Obsolete - replace with PS-2455)............................ 2 PS-2224 Motor Sheave Assembly (Obsolete - replace with PS-2454) ..... 4 PS-2226 Air Duct Clamp . 2 PS-2228 Coal Worm Housing Bearing ................................................................................................ 2 PS-2234 Motor Plate Hinge . 2 PS-2241 Sheave Housing Support 1 PS-2246 Belt Guard . 4 PS-2254 Belt Guard Support Clip ...................................................................................................... 2 PS-2257 Oi1 Drain Pan . 2 PS-2266 Chain Guard . 5 PS-2291 Drier Inlet Ga&ket. 2 PS-2295- ~ Belt Guard Bracket. 8 PS-2298 Overflow Tube . 2 PS-2299 Cooling Tube Assembly. 5 PS-2300 Access Cover Gasket . 2 PS-230 2 Gear Case Assembly. 2 PS-2303 Gear Case Assembly, Used on Model PS-110. (See figure 3 and Parts List II for component parts. 1 2 PS-230 4 Gear Case Assembly. Used on Model PS-160. (See figure 3 and Parts List II for component parts. ) 2 PS-2305 Gear Case Assembly. Used on Model PS-200. (See figure 3 and Parts List II for component parts. ) 2 PS-2306 Gear Case Assembly. Used on Model PS-300. (See figure 3 and Parts List II for component parts. I 2 PS-2307 Gear Case Assembly. Used on Model PS-400. (See figure 3 and Parts List II for component parts.) 4 PS-2350 Seal Plate .... 4 PS-2353 Dust Check Ring. -- PS-23 57 Cooling Tube Clamp. 2 PS-2359 Motor Plate Hinge Screw........................................................................... ...... 2 PS-2361 Fan Drive Belt . 2 PS-2365 Motor Sheave Assembly lObsolete - replace with PS-2457) . . .. 15 PS-2379 Coal Agitator Assembly Consists of: 1 - PS-2380 Agitator Bracket 2- PS-239 1 Retainer Ring 1 - PS-2385 Clamp Plate 2 - V-5252 Agitator Wheel Arm 1 - PS-2386 Agitator Wheel - R.H. 2- 17023 Agitator 8earing 1 - PS-2387 Agitator Wheel - L. H. 4 - 17027 Thrust Bearing 2 - PS-2390 Shaft 4 - 17028 Beari ng 4 PS-24 10 Retaining Ring . 4 PS-2411 Fan Shaft Assembly (Used With PS-2095 Fan Bearing Housing) .... Consists of: 2 - PS-1123 Fan Shaft Bearing N.D. #87507 1 - PS-2105 Fan Shaft 2- PS-2460 Oiler Guide 1 - 38 298 Spacer 4 - 41020 Retainer Ring 14 PS-2413 Nozzle Assembly. Consists of: 1 - PS-44 Nozzle Hinge Pin 1 - PS-45 Nozzle Control Rod 1 - PS-47 Nozzle Handwheel 2 - PS-309 Sleeve Cover Plate 2 - PS-311 Support U Bolt i - PS-2180 Nozzle End 1 - PS-2181 l-in. Deflector 1 - PS-81 Nozzle Body 1 - PS-2182 l-l/2-in. Deflector 1 - PS-308A Support Assembly 1 - PS-2183 2-1/2-in. Deflector 5 PS-2415 Baffle - R.H. . . . 5 PS-2418 Baffle - L.H. . . . 6 PS-2427 Obstruction Guide Housing ....... ............................................... 4 PS-2430 Fan Housing Seal 15 PS-243 1 Coal Agitator Shaft ' Refer to Table I for usage. 2* 1* 1* 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2* 1* 1 1 1 1 1 1 1 1 2 IHPORTAHT: Always specify stoker model number. File No. 7-401 Page 14 UOI SERIES PNEUMATIC SPREADER STOKER FIG. NO. PART NUMBER PART NAME QUAN. REQ'D 15 15 4 4 2 2 2 2 4 4 4 4 4 4 4 4 16 16 16 17 16 16 16 16 16 16 17 2S4 4 6 6 6 6 8 2 2 2 5 5 6 6 6 6 6 1 1 2 2 2 2 2 -2 PS-2432 PS-2433 PS-2434 PS-2440 PS-2452 PS-2454 PS-2455 PS-2457 PS-2459 PS-2461 PS-2462 PS-2463 PS-2465 PS-2468 PS-2484 PS-2485 S-I009R S- 101 IR S- 1012 S- 1049 S- 1050 S-I050R S- I057R S- I058R S- 10S9R S- 1098 S- 1099 40048 40125 41039 41040 41041 41042 41043 41 344 41350 41526 51060 5106 1 51062 51064 51065 51066 51067 51070 51071 51102 511 13 51 114 511 18 80348 80689 Thrust Bearing ....................................................................................................... ... Bearing..................................................................................................................... ...... Fan Wheel......................................................................................................................................... Sliding Nipple Assembly ..... ............................ . ........................... Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly. ......................................................................................... ...... . Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly............................................................................................................. Conveying Fan Assembly .............................................................. . ............................ Refer to Parts List IV for Component Parts Balance Ring.................................................................................................................................. Inner Balance Ring.................................................................................................................... _ Fan Bearing Housing (Used With PS-2468 Fan Shaft Asm.).................................. Gasket................................................ ...... ........................................................................................ Fan Shaft Assembly (Used With PS-2463 Fan Bearing Housing) .... Consists of: 4 - 40120 Retainer Ring I - 38298 Spacer 1 - PS-2105 Fan Shaft I - PS-2466 Bearing - N.D. #97507 2 - PS-2460 Oiler Guide I - PS-2467 Searing - N.D. #97607 Fan Housing Seal - (Used wi.th New Style PS-2114 First Stage Liner Sheet Fan Housing Seal - (Used With New Style First and Second Stage Liner) Ash Hoe and Handle - I-in. Pipe.................................................................................. Used with pin-hole type grates. Clinker Rake and Handle - l-in. Pipe..................................................................... Refractory Tile Slab - 3" x 6" x 18"........................................................................... Used over nozzle opening in front wall. Air Cylinder Assembly for Dump Grates .................................................................... Ash Hoe ........................................................................................................................................ Ash Hoe and Handle - l-in. Pipe . ........................................................................... Used with ribbed-type grates. Clinker Hook and Handle - 3/4-in. Pipe .................................................................... Slice Bar and Handle - l-in. Pipe................................................................................. Slice Bar and Handle - 1- 1/2-- in. Pipe.................................................................... Hot Gas Temperature Indicator - 12-in......................................................................... Steam Cylinder Assembly for Dump Grates. ............................................................. Key...................................................................................................................................................... Retainer Ring .......................................................................................................................... Toggle Handle........................................................................... ...... ........................................ Toggle Link ................................................................................................................................. Lock Pin ........................................................................................................................................ Lock Pin........................................................................... ...... ...................................................... Motor Adjusting Bolt........................................................................................ Cable Spring. .......................................................................................................................... Quadrant Cable Assembly ...................................................................................................... Sheave and Housing Assembly...................................................... ...... ................................. Consists of: I - 41231 Sheave Housing 1 -- 40076 Spacer I -- 41232 Sheave Housing Cover 2 - 40078 Washer I - 41527 Cable Sheave Worm Coupling Nut . . . . Worm Coupling Plug. Worm CleanoutHousing. Cleanout Stud ............................ Worm Cleanout Housing Cover. Worm Cleanout Housing Gasket Bin Plate......................................... Bin Channel .................................. Bin Worm Bearing . . . . Key....................................................... Lock Nut ......................................... Lock Washer .................................. Motor Adjusting Bracket . Flare Nut (Not Illustrated)............................................................................................... Brass Elbow................................................................................................................................. ' Refer to Table J for usage 4 4 2 * * 2 I 2 I I I As Required I 1 As Required 3 2 2 2 4 IMPORTANT: Always specify stoker model number. HOI SERIES PNEUMATIC SPREADER STOKER FIG. NO. 3 3 3 3 3 3 3 3 3 3 * 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 S 3 3 3 3 3 3 3 3 3 3 '3 .3 3 3 3 3 3 3 3 3 3 3 3 *3 3 3 3 3 PARTS LIST II COMPONENT PARTS OF PS GEAR CASE ASSEMBLIES PART NUMBER PART NAME A-I 16 PS-2025 PS-2184 PS-2240 PS-2271 PS-2272 PS-2273 PS-2274 _ PS-2275 PS-2276 PS-2292 40029 40030 4003 I 40036 40048 40061 40062 400 6 3 40064 40066 40069 40073 40074 40075 40076 40078 40085 40086 40091 40093 40094 40100 40101 40 106 40109 40110 4011 I 40112 40116 40124 40125 40126 40129 40136 40152 40153 40154 40155 40163 40 168 40173 40176 40 181 40182 50009 50010 Ball Bearing (N.D.-7505). Drive Sprocket - 21 Teeth . . Used on Model PS-4-00 only. Quadrant ....................................................... Drive Sprocket - 16 Teeth . Used on Model PS-300 only. Cam..................................................................... Cam..................................................................... Cam. .... ......................................... Cam............................ ......................................... Cam............................ ....... Cam..................................................................... Cam Adjusting Washer ........................... Collector Plate......................................... Finger Spring ......................................... Shoulder Screw .......................................... Bearing Stop Cover Shim . Spring Key ................................................ Cam Follower................................................ Cam Roller . ................................... Cam Roller Stud. ...... Spring. ....................................................... Coal Feed Quadrant Arm .... Air Adjustment Quadrant Arm. . . Air Adjustment Sheave............................ Eccentric Bushing . ............................ Air Adjustment Pivot Screw . Air Adjustment Spacer............................ Air Adjustment Washer. .... Plug.............................................................. Plug.............................................................. Overload Release Pin ............................ Ball Bearing (N.D. 7507). Ball Bearing (N.D. 55507) . . . Ball Bearing (N.D. 7506). Ball Bearing (N.D. 88035) Oil Seal (Nat. 140328) .... Oil Seal (Vital ic 6318) .... Bearing (Oilite A--956) .... Bearing foilite T-I303-I) Bearing (Oilite) . ........................... Bearing (Oilite A-1167-2) Retainer Ring (Eaton International) Retainer Ring (Eaton International) Retainer Ring (Waldes Truarc) . Knob......................................... Low Speed Shaft Key ............................ Washer (ABEC-W-07).................................. Lock Nut (ABEC-N-07)........................... Acorn Nut - Upper .................................. Acorn Nut - Lower ...... Oil Gauge.................................. Key. . ................................................ Chain Retainer Pul ley........................... Name PI ate................................................ Quadrant Arm Stop ...... Retainer Screw ......................................... Gear Case....................................................... Gear Case Cover. ...... 1 Not illustrated. IMPORTANT: Always specify stoker model number. File No. 7-401 Page 15 QUAN. REQ'D As Reg u i red 3 As Required 3 1 2 2 I 4 I I I 3 1 2 2 1 2 I 3 3 2 File No. 7-401 Page 16 401 SERIES PNEUMATIC SPREADER STOKER FIG. NO. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 PART NUMBER PART NAME 500 12 500 13 50011 50015 50016 50017 50018 50019 50020 50023 50024 50025 50026 50028 50029 50030 50031 50033 50034 50035 50036 50037 50038 50039 50040 50041 50042 50043 50044 50045 50046 500 47 50050 50057 50058 50059 50060 50061 50062 50063 50064 50065 50066 50067 50068 50069 50070 50071 50072 50073 50075 50077 50085 50089 50093 50115 50118 50120 50121 50122 50123 50124 Main Worm Shaft. ..................................................................................................................... Main Worm Gear............................................................................................................................ Differential Worm Shaft ....................................................................................................... Differential Worm Gear................................................................................................ Low Speed Shaft. ..................................................................................................................... Spacer................................................................................................................................................. Interna] Gear ...... ................................................................................... Sun Pinion Gear....................................................... ...... ............................................................. Spider Assembly............................................................................................................................ Planet Gear................................................................................................................................... Inner Spider. . . .............................................................................................................. Thrust Washer ............................................................................................................................ Thrust Washer ................................................................................... - -- Back Gear Hub..................................................................... ...... Spring. ................................................................................................................................... ...... Drive Shaft Key....................................................................................................... ....... Drive Shaft ................................................................................................................................... Drive Shaft Shim ..................................................................................................................... Drive Sprocket - II Teeth ......................................................................................... Used on PS-50, 75, 110, 160 and 200. Shear Pin................................... ........................................ ............................................................. Shear Pin Retainer. .............................................................................................................. Main Worm Bearing Retainer ................................................................................................ Differential Worm Bearing Retainer ............................................................................ Main Worm Bearing Retainer Gasket................................................................................... Differentia] Worm Bearing Retainer Gasket.............................................................. Input Sheave................................................................................................................................... Sliding Sheave ............................................................................................................................ Adjusting Sheave..................................................................................................................... Bearing Housing.............................................................. ...... ...................................................... Sheave Drive Pin ..................................................................................................................... Bushing....................................................... .................................................................................. Belt Shifter Support................................................................................................ ...... . Belt Shifter Assembly. ... ................................................................................... Consists of: 1 - 50097 Belt Shifter - Front Half 1 - 50098 Belt Shifter - Rear Half Spring Washer ....... ............................................................................ Spring Washer ......................................................................................... .................................. Oil Seal Housing ..... .................................................................................. Snap Ring. ................................... ........... Ball Bearing (N.D. 7607). ............................ .......... Ball Bearing (N.D. 550 7). ................................................................................................ Ball Bearing (N.D. 9S3L09) ................................................................................................ Needle Bearing (Tor. 8-I2I0X) .... ............................ ..... Needle Bearing (Tor. B-24I4X0H)................................................ ...... Bearing (Oil i te A-(213-2)................................................................................................ Bearing (Oilite A-1623) . ......................................................................................... Oil Seal (Nat. 50135).............................................................................................................. Oil Seal (Nat. 50 4 52).............................................................................................................. Oil Seal (Nat. 50055-S)....................................................................................................... Retainer Ring (Wal. NAS 51-175).................................. ............................................... Retainer Ring (Wal. No. 51-325).................................................................................. Retainer Ring (Wal. NAS 51-118) .................................................................................. Retainer Ring (Wal. NAS 50-300) . . .............................................................. Wide V Belt.................................................................................................................................. Lock Washer................................................ .................................................................... Oil Distributor........................................................................................................................... Oil Distributor Chain. . ................................................................................................ Dowel Pin .................................................................................................................................. Gear .... .................................................................................................................... Oil Elevating Pulley............................................................................................................. Chain Retainer Pulley Screw................................................................................................ Cover Bearing Stop.................................................................................................................... Case Bearing Stop .................................................................................................................... Worm Wheel Shim......................................... .......................................................................... QUAN. REQ'D 1 1 1 1 1 1 1 1 1 3 1 1 1 1 3 1 1 As Required 1 As Required 1 1 1 1 1 1 2 I 2 4 4 1 1 1 1 1 1 1 1 2 6 2 2 1 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 1 1 As Required IMPORTANT: Always specify stoker model number. FIG. NO. 3 3 3 3 PART NUMBER 50125 50126 50129 50 139 401 SERIES PNEUMATIC SPREADER STOKER PART NAME Worm Wheel Shim............................ Pointer Internal Gear Bearing Retainer Overload Switch Assembly. ConsI sts of: I - 40079 8ox I -40080 Actuator Lever I -40083 Spring I -40084 Spring I -40115 Beari ng I -40 130 Nut I -40134 Insulation I - 50 116 Res'et Lever I - 50117 Reset Spacer I - 50138 Conduit 1 - 50 230 Switch Asm. 2 - 80263 Anti-Short Bushing I - 81472 90 Connector File No. 7-401 Page 17 (JUAN. REQ' D As Required 2 I I Figure 9 - PG-4C Undergrate Fan Unit - Refer to Parts List III (Pg 21) me x> Page 18 HU I StKItS PNtUMAII0 SPREADER STOKER * A V-0222 V-0233 V-0225 -13W V' PS-2278 51467 51466 ! Figure 10 - PG-50, 51, 52 and 53 Single Undergrate Fan Units - Refer to Parts List III (Pg 21) ' !| I Figure 11 - Duplex Fan Unit - Refer to Parts List III (Pg 21) IMPORTANT: Always specify stoker model number. 4UI btKItb rNtUMAIIU brKtAUtK blUKtK tile No. 7-401 Page 19 PS-167 PS-U2I c-eoR ash. r'b- '.*')? ASH. Figure 12 - Internal Parts of Undergrate Fan Units - Refer to Parts List III (Pg 21) AIR DUCT ASSEMBLIES PS-379 PS-1019 V-5835A PS-736 V-5317 [ V-5823 i PS-252 V-652U V-6527 PIN -V-6526 Figure 13 - Volumeter Air Duct Parts - Refer to Parts List III (Pg 21) IMPORTAXT: Always specify stoker model number Page 20 I P S .160 I uM l\LHUC.rV o iuwh | PS-300 3X< Uw-1l 5 2 in A Ho. Is -F in o 4 I/I a. s 0) X - j< wi S," s>^ d -- t- <j ?J2, & XX IoD IomS. m o 4<Mv s (A X Xo 0 gy aO ujl <a <2<- 5 o V) 0 aO U_/l is x(<A mINI XO XX o o K in N in > 2 d0. XX in N o 4 4CD 54 in 2 > - <*> o0 1 .a HI iPnI oa X C-. oo. o0 gy o0 o p 4(B 4\ 2in in > - | Oa< U-_>>l 1i34n- L>>O0 s> X o0. X o mo r S 0 o ion > aO4 U-oil 4 5^ d a XX cn m o 4 "0V 4 CV in X <n - IdS in g S; x XX A o iOm- 4 in ? 4 w*. a. O 5y X aO<; <U-Jil *g<- so <n *o ion d XX ro o10 Oin rivt cv 0 (0A Oo<c oU_jl g4 S a- X X (M Onf m4o mM el (4V (!) X - - O a"A. <3 10 s; in _ o { x o *o> y a. X X 1o0 oin (V - in X - 2 (J in X o10 O r N4 *- n Sm o0 x > - eCC4C. Uo>-1l zu itn- <mn u4 XX m ion 4 4 X <V - m X j u Ct m in < 3 ft PI CJ X X toy dX o<0 o r 4N(V - 4 X - 0 - p- CO P) A o0 - X0 - 00 0 0 - in r- 0 in o0 a - in 0 X - 0 o o 0 N 0 - o L 0 o0 in ffl - 0 X - 0 <oIVJ 4 00 ~ in IN. On (!) a - 0 X - 0 00 0 X 0N r s 04M> in X I0V 0 - n00 0 X - 0s 0 " ooo 0 CO 'v 2 0 in 0 - 00tov 0 X - 0 or 0 (V - 0 CM 1" 0 to o0 ffi - irnv - 00 X - 0N to m o 000 r m D - 0 - 0 0 4oo X - O M IV 0O 000 - in m - 0 - 0 oo 0 X - 0 Pv L O in o0 0 - 00 0 - 00 0 X - 0 o 00 r- - s o - 0 - 0 0 oo4 X - o n 0o 0 m0 000 - 0 oo 0 X - 0 - 00 PH X pH 0 0 - r1 X - 0 P- 0 0 0 00 - 0 - = oo XX a< ja za >u HO in o L4) XX X 1o0 0 o irn- O 'jC 4 5cn 4 in X - - NnO 0 \n rt 0 o0 0 - 0 X - = 8Cl M*1 <A auXo Ul C<C or ul g D x Z<x U>a.l >CD 2 U0l UIVl tn (!) -I o>u a Ul X % < eX x x< X in zO U. O O z 0 U>l U<>l Ul o O iXn X oz (1) O> o O O Ul in 0X3 zo O o" X0Xo1 O Zj (J A > Z 5 0 oz XO OZ 0 Ul >OOX O o 2 X fit i<n Zs> Z < __<> w *cX>v-- o-O>1 rUm<l >SaC0- uXz-4 n\04Nv x 1i is uo*i X0 uaj xz< ><0Z 0 Xz< IMPORTANT. Always specify stoker model number 401 SERIES PNEUMATIC SPREADER STOKER ' "File No. 7-401 Page 21 PARTS LIST ill COMPONENT PARTS OF UNDERGRATE FAN UN ITS AND VOLUMETER AIR DUCT ASSEMBLIES. SEE TABLE II FOR USAGE AND DATA REGARDING UNDERGRATE FANS. FIG. NO. PART NUMBER 12 A-86 12 C-80R 12 10 94 10 * 12 12 12 9* 9 10 13 C-86 PF-0020 PF-0022 ' PF-0023 PF-0025 PF-0206 PF-0219 PF-0235 PS-120 PS-121R PS-I12R PS-13 I PS-158 PS-187 PS-257 PS-325 PS-368 PS-372 PS-379VR 13 PS-381VR it PS-390 9 PS-395 9 PS-396 PART NAME Felt Washer Drive End Fan Wheel Assembly . Consists of: . I - C-80 Fan Hub I - V-56II Fan Wheel Spacer I - V-56I3A Fan Wheel - 4 x 14-1/2 in. I - V--5614A Fan Wheel - 7 x Felt Washer Drive End . 1/2-14 x 1-3/4- In. Nipple . 1/2-14 x 3 In. Nipple . 1/2- K x 4 In. Nipple . 1-14 x 15-3/4 Pipe . . . 14--1/2 in. 90 Ell.......................................... Cable Pipe . Bushing - I/4--in. 1/2-in. Fan Shaft ........................................................ Fan Wheel '- R.H.............................................. 7 in. x 14-1/2 in. Fan Wheel - L.H.............................................. 7 in. x 14-1/2 in. Fan Shaft Bearing. ...... Lower Tie Strap .......................................... Fan Sheave.................................. Motor Spacing Bar.......................................... Belt Guard Spacer.......................................... Motor Plate....................................................... Belt Guard ....................................................... Air Duct and Volumeter Assembly . Consists of: - PS-379 Ai r Duct - PS-389 Volumeter Air Tube - PS-736 Volumeter Diaphragm - V-23IS Regulator Rod Quadrant - V-5 135A Regulator Panel - V-5317 Volumeter Lower Housing - V-5823 Regulator Damper Rod - V-5835A Volumeter Upper Housing - V-6524 Diaphragm Piston Rod - V-6526 Piston Rod Yoke -- V-6527 Yoke Pin - V-6535 Regulator Blade Air Duct and Volumeter Assembly . Consi sts of: PS-252 Regulator Damper Rod PS-255 Volumeter Air Tube - PS-381 Ai r Duct PS-734 Regulator Blade PS-736 Volumeter Diaphragm V-2318 Regulator Rod Quadrant V-5IB5A Regulator Panel V-5317 Lower Volumeter Housing V-5835A Upper Volumeter Housing V-6524 Diaphragm Piston Rod V-6526 Piston Rod Yoke V-6527 Yoke Pin Fan Inlet King................................................ Fan Wheel......................................... ...... Fan Housing....................................................... QUAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 1 2222 1 2 1 122 2 1 1 1 22 1 2244 1 1 1 22 1 122 1 1 22 1 1 22 1 1 22 1 2244 22 2 2 1 1 1 1 1 1 22 22244 1 1 ` Wot illustrated. IMPORTANT: Always specify stoker model number File No. 7-401 Page 22 401 SERIES PNEUMATIC SPREADER STOKER FIG. NO. PART NUMBER 9 PS-400 9 PS-416 10 PS-422 9 PS-424 9 PS-475 10 PS-476 94 10 9 13 PS-461 PS-482 PS-I0I8VR 13 PS-1020 9410 10 9 10 10 10 12 11 9410 9410 9410 9410 10 10 PS-2265 PS-2278 PS-2279 PS-2281 PS-2282 PS-2296 PS-2366 PS-2367 PS-2369 PS-2371 PS-2 37 2 PS-2375 PS-2392 PS-2393 PART NAME Belt Guard Spacer....................................................................................................... Motor Sheave , ....................................................................................................... Motor Sheave ... .......................................................................................... Belt Guard .... .......................................................................................... Fan Housing Assembly................................................................................................ Consi sts of: 1 - PS-352 Lower Tie Plate 1 - PS-354A Body Sheet 8 - PS-356 Tie Rod 2 - PS-357 Body Sheet Gasket 1 - PS-477 Leg - R. H. 1 - PS-478 Leg - L\ H. ' F*an Housing. .............................................................................................................. Consists of: 2 - PS-357 Body Sheet Gasket 1 - PS-364 Body Sheet 8 - PS-366 Tie Rod 1 - PS-477 A Leg - R. H. 1 - PS-478 A Leg - L. H. Indicator Vane Rod Bearing Plate. .......... Indicator Vane Rod................................................................................................ Air Duct and Volumeter Assembly - 24 In. Long .................................. Consists of: 1 - PS-389 Volumeter Air Tube 1 - PS-736 Volumeter Diaphragm 1 - PS-1019 Air Duct - 24 in. Long 1 - V-2318 Regulator Rod Quadrant 1 - V-5I85A Regulator Panel 1 _ V-5317 Volumeter Lower Housing 1 - V-5823 Regulator Damper Rod 1 - V-5835A Volumeter Upper Housing | _ V-6524 Diaphragm Piston Rod 1 - V-6526 Piston Rod Yoke 1 - V-6527 Yoke Pin 1 - V-6535 Regulator Blade Air Duct and Volumeter Assembly - 24 In. Long .................................. Consists of: 1 - PS-252 Regulator Damper Rod 1 - PS-255 Volumeter Air Tube 1 - PS-734 Regulator Blade 1 - PS-736 Volumeter Diaphragm 1 - PS-1021 Air Duct - 24 in. Long 1 - V-2318 Regulator Rod Quadrant 1 - V-5I85A Regulator Panel 1 - V-5317 Lower Volumeter Housing 1 - V-5835A Upper Volumeter Housing 1 - V-6524 Diaphragm Piston Rod 1 - V-65 26 Piston Rod Yoke 1 - V-6527 Yoke Pin Indicator Vane Frame................................................................................................ Indicator Vane Plate.................................................................................. ...... . Indicator Vane Plate................................................................................................ Indicator Vane Rod.............................................................. ...... Indicator Vane Rod ................................................................................................ Indicator Valve ....................................................................................................... Fan Sheave.................................................................................................................... Belt Guard............................................................................ ...... ................................. Indicator Cable .............................................................. . ........................... Cable Connector............................ ...... ............................................... ...... Pipe Bracket....................................................... ...... ............................................... Sheave Housing Bracket ......................................................................................... Motor Plate................................. ...... ......................................... ...... Indicator Air Tube................................................................................................ /Is required PUAN. Rtp'D PG PG PG PG PG 4C 50 51 52 53 2 1 1 1 1 1 1 22 11 1 * 122 **** 1 1 1 22 1 1 22 1 22 11 11 1 t1 2 2 11 1 1 122 1 1 1 22 1 1 1 22 1 1 1 22 1 1 22 1 1 22 IMPORTANT: Always specify stoker model number FIG. NO. 1I * 12 9*10 9*10 12 12 12 12 10 10 10 11 12 12 12 12 11 10 9& 10 94 10 9410 9410 9,lOtl 1 10 10 9 1*2 * 9 9 9 9 PART NUMBER PS-2394 PS-2395 PS- 2*458 V-l 1 1 V-524 V-620 V-623 V-624 V-779 V-0222 V-0225 V-0233 V-5020 V-5507 V-5508 V-- 5512 V-5524 V-5553 V-5616 41436 41473 41477 41526 51123 51466 51467 PS-377 PS-421 PS-425 PS-426 PS-427 PS-430 PS-432 PS-434 PS-435 Motor 401 SERIES PNEUMATIC SPREADER SIUKEK PART NAME Belt - Goodyear B-62.......................................................................................... Button PIua.............................................................................................................. Fan Shaft Assembly .......................................................................................... Consists of: 1 - PS- 13 1 Bearing 1 - PS-367 Fan Shaft Fan Screen .......................................... .......... Fan Screen Ring....................................................... ......................................... Bearing Cover Plate .......................................................................................... Bearing Retainer ................................................................................................ Bearing Cover Plate - Drive End .................................. .... Bearing Retainer - Drive End ..................................................................... Motor Plate -Spacer.......................................................................................... l/2-in. dia. x 1 /4-- In. pipe Motor Plate Spacer.......................................... ...... ................................... l/2-in. dia. x 5/8-in. pipe Motor Plate Spacer............................................................................ ...... . 1/2-in. dia. x 1-5/8-in. pipe Motor Sheave ....................................................................................................... Bearing Retainer - Drive End ..................................................................... Bearing Retainer ................................................................................................. Bearing Retainer Washer................................................................................... Fan Shaft Nut............................ ........................................................................... Motor Sheave.............................................................. ...... .................................. Motor Sheave ....................................................................................................... Indicator Valve Body Weight ..................................................................... Indicator Valve ..... .............................................................. Indicator Valve Body....................................................... Housing and Sheave Assembly ..................................................................... Cons! sts of: 1 - 40076 Spacer 2 - 40 078 Washer 1 - 41221 Sheave Housing 1 - 41232 Sheave Housing Cover 1 - 41527 Cable Sheave Belt - Goodyear B-bO................................................ ...................................... Air Tube Elbow................................................................................................ Air Tube Connector ......................................................................................... PARTS USED WITH 25 CYCLE MOTOR ON PG-4C FAN UNIT Motor Plate.............................................................................................................. Motor Sheave....................................................... ...... ........................................ Auxiliary Fan Housing Inner Plate .................................. ... Auxiliary Fan Housing Band............................................................................ Auxiliary Fan Housing Outer Plate ....................................................... Fan Wheel ..................................................................... ...... .................................. l-i n. x 14- 1/ 2- i n. Belt Guard.............................................................................................................. Motor Spacing Bar................................................................................................ Belt - Gates #3680 .......................................................................................... 1 H.P.I450 R.P.M., 220 Volt, 25 Cycle, 3 Phase, BallBearing K-224 Frame file No. 7-401 Page 23 QUaN. REQ'D PG PG PG PG PG 4C bo 51 52 S3 ? 1 1 22 1 1 1 1 22 1 1 1 22 1 1 1 22 1 1 1 22 2 .2 2 4 4 1 1 22 44 4 4 21 1 1 11 1 11 11 11 11 1 1 22 1 22 122 1 22 1 1 22 111 1 22 1 22 1111 1 1 22 3366 1 1 1 1 1 1 1 2 1 PARTS USED WITH 60 CYCLE OVERSPEED ON PG-4C FAN UNIT 9 PS-377 10 PS-421 9 PS-432 9 PS-434 9 PS-435 Motor Motor Plate.............................................................................................................. Motor Sheave ..... ..................................................................... Belt.'Guard.............................................................................................................. Motor Spacing Bar. . .................................................................................. Belt - Gates #3680 .......................................................................................... 2 H.P., 1750 R.P.M., 220 Volt, 60 Cycle, 3 Phase, K-224 Frame ' Not illustrated. 1 1 1 2 1 IMPORTANT: Always specif* stoker model number File No. 7-401 Page 24 1J0I SERIES PNEUMATIC SPREADER STOKER FIG. NO. * * * * * * * * * * PART NUMBER PS-923 PS-927 PS-885 PS-889 PS-893 PS-898 PS-903 PS-907 PS-911 PS-919 PS-925 PS-929 PART NAME OPTIONAL AIR DUCT EXTENSIONS AND ELBOWS FOR UNDERGRATE FAN UNITS Air Duct Extension - 24-In................................................................................ Air Duct Extension - 48-In................................ ...... ........................................ 45 Elbow - Horizontal......................................... ...... ........................................ 45 Elbow - Horizontal......................................................................................... 90 Elbow - Horizontal......................................................................................... 90 Elbow - Horizontal.................................. Vertical Elbow - Rectangular Outlet ....................................................... Vertical Elbow - Rectangular Outlet ... ................................... Vertical Elbow - Square Outlet .................................. ..... Vertical Elbow - Side Outlet........................................................................... 'AIT Duct Extension - 24-In................................................................................ Air Duct Extension - 48-In. ... ....................................................... * Mot illustrated ** As Required QUAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 ** ** ** ** ** * * ** ** ** * * *# ** ** ** ** ** ** ** ** * ** ** ** ** ** ** ** ** ** * ** ** ** J PARTS LIST IV COMPONENT PARTS OF PS-2470 REPLACEMENT CONVEYOR FAN ASSEMBLY FIG. NO. PART NO. PART NAME QUAN. REQ'D PF-0225 Butt Nipple - 3/4-14 X 1" Long-Straight Pipe Thread (Not Illustrated) . PF-0358 Nipple - 1/4" X 6" Long-For PS-2098 Fan Shaft Oiler (Not Illustrated) . 4 PS-2097 Seal Ring ........................................................................................................................................ 4 PS-2098 Fan Shaft Oiler.......................................................................................................................... 4 PS-2099 Breather Tube........................................................................................................ ...................... 4 PS-2100 Water Cooled Bearing Retainer ........................................................................................... 4 PS-2102 Leveling Studs.............................................................................................................................. 3 4 PS-2103 Fan Spacer.................................................. .... ................................................................... .... . . 3 4 PS-2111 Fan Inlet Plate......................................................................... ^ .... ....................... 4 PS-2114 First Stage Liner............................................................................. .... .................................... 4 PS-2116 Fan Interstage............................................................................................................................... 4 PS-2117 Second Stage Liner...................................................................................................................... 4 PS-2119 Conveyor Fan Housing.................................... ............................................................................ 4 PS-2123 Back Plate Insulation - 3/8" Thick.................................................................................. 4 PS-2125 Insulation Cover Sheet............................................................................................... . . . 4 PS-2132 Wrapper Sheet ............................................................................................................................... 4 PS-2160 Fan Bearing Housing Support ........................................................................................... 4 PS-2176 Balancing Hub Assembly............................................................................................................. 4 PS-2350 Seal Plate...................................................................................... ................................... .... * 4 PS-2353 Dust Check Ring........................................................................................................ .... 4 PS-2410 Retainer Ring.................. ........................................................................................................... 4 PS-2434 Fan Wheel ........................................................................................................................................ 4 PS-246 I Balance Ring.............................................................................................................* 4 PS-2462 Inner Balance Ring...................................................................................................................... 4 PS-2463 Fan Bearing Housing................................................................................................................. 4 PS-2465 Gasket................................................................................................................................................. 4 PS-2468 Fan Shaft Assembly............................................................... .... ................................................. Consists of: 4 - 40120 Retainer Ring I - 38298 Spacer 1 - PS-2105 Fan Shaft I - PS-2466 Bearing -N.D. 2 - PS-2460 Oiler Guide #97507 I - PS-2467 Bearing - N.D. #97607 4 PS-2484 Fan Housing Seal.......................................................................................................................... 4 PS-2485 Fan Housing Seal.................. ...................................................................... ............................... 2 4 40048 Key............................................. ....................................................................................................... 2 80348 Flare Nut (Not Illustrated)............................................................................. 2 4 80689 Brass Elbow ................................................................................................................................... 2 IMPORTANT: Always specify stoker model number HU I iJtKICS rNtUMAIIU CirKCAULK OIUIStK "'riie rvo. l-wi Page 25 Figure 14 - PS-2413 Nozzle Assembly - Refer to Parts List I (Pg 10) Figure 15 - Coal Agitator Parts - Refer to Parts List I (Pg 10) IMPORTANT: ALuavs specif) stoaer model number Pa 26 hu i ocn ao c>r Rt%tCKK ^v tK Ps- 2/77 Fi6"re 16 . 'see//, A'e/, /if/';SRTAHt Al Mays st>ec,f,, er to P,arts Lin i (p6 10) nodet ,, Utnpet . 401 SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 27 F ig u r e 17 - Dump G ra te P a rts - R e fe r to P a rts L i s t (P g 1 0 )I IMPORTANT: ALvays specify stoner model number me nu, (-*v Page 28 4U I rNLUMAIIL b^KtAUtK blUKtK F ig u re 18 - S ta tio n a r y O ra te P a rts - R e fe r to P a rts L i s t (P g 1 0 )I -J <i> < uj z<: </) hJ O IMPORTANT: Always specify Stoner model number REPLACEMENT PARTS 401 Series Pneumatic Spreader Stokers Figure 1 --PS-401 Series Pneumatic Spreader Stoker - Refer to Parts List I (Pg 10) MODELS COVERED - 1949-1964 MODEL PS-75 PS-110 PS-160 MODEL PS-200 PS-300 PS-400 IMPORTANT: Always specify stoker model number and serial number when ordering. GENERAL. Replacement parts for the 401 Series Pneumatic Spreader Stokers are listed and illus trated in this catalog. These units were first produced in 1949. UNDERGRATE FAN UNITS. These units were equipped with undergrate fan units and an air duct with volumeter. Refer to Table II, page 15, for usage of the items. Refer'to figures 9, 10, 11, 12 and 13 and to Parts List III for identification of parts. GRATE PARTS. These stokers were equipped with either stationary-type grates or power-operated dump grates. Refer to figures 16, 17 and 18 and to Parts List I for identification of parts. THE WILL-BURT COMPANY ORRVILLE, OHIO, U.S.A. Printed in U.S.A. Form No. 1986A File No. 7-401 Page 2 LIST OF CONTENTS PARTSLISTS Page Parts List I - Standard, Optional andExtraEquipment...........................................................10 Parts List II - PS Gear Case Assembly................................................................... Parts LisC"III - Undergrate Fan Units and Air Duct Parts.....................................21 Parts List IV - Conveying Fan Assembly..................................................................................24 TABLES Table I - Stoker and Conveying Fan Drive Data............................................................ 9 Table II - Undergrate Fan Data............................................................................................................... 20 LIST OF ILLUSTRATIONS Figure 1 - PS-401 Series Pneumatic SpreaderStoker ..................................................... 1 Figure 2 - Front View of Stoker .............................................................................................. 3 Figure 3 - PS Gear Case Assembly.................................................................................................4&5 Figure 4- Train View of Conveyor Fan Parts...................................................................... 6 Figure 5 - Coal Drier Parts............................................................................................................. 7 Figure 6 - Obstruction Guide and Cleanout Parts ......................................................... 7 Figure 7 - Conveyor Elbow Assemblies ............................................................................... 8 Figure 8 - Transfer Housing Cleanout Parts .................................................................. 8 Figure 9 - PG-4C Undergrate Fan Unit....................................................................................... 17 Figure 10 - PG-50, 51, 52 and 53 SingleUndergrate Fan Units .... 18 Figure 11 - Duplex Undergrate Fan Unit........................................................................................... 18 Figure 12 - Internal Parts of Undergrate FanUnits ...................................................... 19 Figure 13 - Volumeter Air Duct Parts.................................................................................................. 19 Figure 14 - PS-2413 Nozzle Assembly ........................................................................................... 25 Figure 15 - Coal Agitator Parts...........................................................................................................25 Figure 16 - Miscellaneous Parts .................................................................................................. 26 Figure 17 - Dump Grate Parts.................................................................................................................. 27 Figure 18 - Stationary Grate Parts ........................................................................................... 28 15 hu I ocrsico rntwiMi iu orr\cttutr\ oiur\cr\ ; .--tv* Page 3 co cn ZD < O CL >UJ -- a CO a> CD O bC o o o CO o o CJ CJ a MK ZT CO oc>n CO r- CO CO CO a CO CO CO o li_ CO z CO 1 o CO CO 1r to o_ CO CO lO a. CL o Juj " a r- ozo CO 1 CO CO CO co 1 1j CO CO CO CO CO 11 CO CO < oz h- co i irn- CO CO a CO * CO LL CJ) CO CO CO cn -- o CO o CO co i aCO_ CO a. QCO_ F ig u re 2 - F ro n t V iew o f S to k e r - R e fe r to P a rts L i s t (P g 1 0 )I CO a in ir> in in in aa aa co co co co i CO co CO CO o_ a. CL Q_ O---- -- CO OJ to CO CO CO CO 1CO CO CO CO II CO CO CO CO Q_ CL. O- O- co O) co CO -- CO co CO 1 5UJ CO CO Q_ CL I- O UJ O^ a in o> a --o co CO CO -- CO CO 1 CO 1 CO 1 CO CO CO CO CL CL Q_ CL CO -- CO o in cn in CO CO co co co co { CO n cO i CO CL in CL Ou CO CO a in oooo 00 CO CO CO CO CO CO CO CO CO 1 CO CO CO CO CO CL CL Q_ CL Q_ CO Ri -- IuD 3 o. +J os ID a a CO o CO 1 CO **" o a a. < o g m co CO in aa IMPORTAST: Always specify stoker model number. me -v Page 4 401 SERIES PNEUMATIC SPREADER STOKER Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IP.FCRTAHT: Always syectfy street model number. in V O ULMU U. I \ Ull/fNLlX 40091 40109 Page 5 Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IH PORTART: Always specify stoker model number. Kile No. 7-401 Page 6 401 SERIES PNEUMATIC SPREADER STOKER IMPORTANT: Always specify stoker model number. --* IF ig u r e 4 - T r a in V iew o f C onveyor Fan P a r ts - R e fe r to P a rts L i s t (PG 1 0 ) (R e fe r to P a rts L is t IV (Pg 2 4 ) fo r P a rts In c lu d e d in Replacem ent Fan A ssem bly) PS-2053 ASM PS-2070 PS-20 I I PS-2073 PS-2075 401 SERIES PNEUMATIC SPREADER STOKER Kile No. 7-401 Page 7 PS-2026 PS-20711 PS-2036 ASM. Figure 5 - Coal Drier Parts - Refer to Parts List I (Pg 10) Figure 6 - Obstruction Guide and Cleanout Parts - Refer to Parts List I (Pg 10) IM PORTART: Always specify stoker model number. File No, 7-401 Page 8 1401 SERIES PNEUMATIC SPREADER STOKER Figure 7 - Conveyor Elbow Assemblies - Refer to Parts List I (Pg 10) Figure 8 - Transfer Housing Cleanout Parts - Refer to Parts List I (Pg 10) IMPORTAHT: Always specify stoker model number. TABLE I STOKER AND CONVEYING FAN DRIVE DATA P S -75-1 10-160 P S -200 PS- 300 P S -400 STANDARD o p t io n a l OVER S P E E D FAN D R IV E P S -2457 1 P S -2 4 5 1 111 1P S- 1. 2/445 0 1 _________ 2/ I - * ______ 1 Z 2 Z ll. NO. 1 STANDARD .NO . 2 O PTIO N AL US ING 200-P S FAN D R IV E NO. 3 O P T IO N A L U SIN G 300-P S FAN D R IV E NO. 4 O PTIO N AL U SIN G 400-P S FAN D R IV E NO. 2 STANDARD NO. 3 O PTIO N AL US ING 300-P S FAN D R IV E NO. 4 O PTIO N AL U SIN G 4 0 0 -PS FAN D R IV E NO. 3 NO. 4 N O .3 NO. 4 STANDARD O PTIO N AL OVER SPEED FAN D R IV E 7 -1 /2 7 -1 /2 1 3660 1 4000 in in Tt in CM tn CL CSD P S -2456 PS -21 0 4 | 6 -1 /2 j in 00'O CM CM to on CM CD CM CtoL CtnL CD on o CM CM CM rO) CM CinL m CM in CM o m to 0in. P S -2276 P S -2025 O) CM o CM CO CM tCnL | 1 | |] 1 1 | | L | | | | 000P | 5 0- 0' 4 1 ____________ 6 / 2 i i| 1 |1 | | P S - 2 2 2 0 || P S - 2 3 6 1 1 I P S - 2 2 1 5 || P S - 2 1 0 4 || P S - 2 2 1 5 I PS 21 0 4 j 1 3 - 1 / 4r 1 P S -2455 2 /1 -9 | L B /i-i 1 | P S -2361 | B -93 P S -2457 o in <\ CM in CM CM ID tCnL to tn in Ql CM | 1 2 /1 -2 7) in CM t0n. CM in CL oN CM CM O) atn 00 CM <0Oto06 oin Oto CM CD atn. P S -2 2 7 6 P S .2240 to O CO CM too CM |1 | in niinn to in CM CM tn ton_ in \CO \CM tn CL cM tnL 1 3 -1 /4 to 0o0r CiD CM Oo \CM to CT as CM otCtooO oin CM tn CL *3 cOon - O CM cn O CM in tCnL CO CM co in CtnL 50041 -"? B -60 PS -2 2 7 5 2 || 1 0 - 7 / 8 || | PS-2453 | 1 PS - 2 4 5 2 | in to CM CM CM 001 CM oin CtnL CD CM cn II ( 7 . 6 - P S - 7 5 ) (1 1 . 1 - P S -1 1 0 ) ( 1 6 . 3 - P S - 1 6 0 ) I l|(PS-2272-"PS -7 5 ) (P S -2 2 7 3 -P S -1 10) (P S .2 2 7 4 -P S -1 6 0 )| 1 |1 1 | 4000 | | 1 P S -2 2 2 0 1 P S -2361 1 | P S - 2 4 5 4 || P S - 2 4 5 2 | in iinn CM tCnL in tino CM irnr co \ CM \ tCnL <M tCnL 1 3 -1 /4 in CM CM to tn a. o CM CM tCnL to <n CM CD fO-*) C1D CM ttoo cn | 1 0 -7 /8 [ n in m 10in < CM CM CM CM t0n- iCnL CM 90 CM CM on o*?r cM - <D CM \CO TT CM CM to ian. CO - iQn_ tn a. CtnL | 3250 50041 CM \ to P S -2150 B -60 itoonn - or O CM oo CM CinL 00 m | 2940 1 1 * o . d o CD o oz U- o d z . O U_ o o oz UJ H-->* L_ --I'M tn 7. < X oz u_ ,f 2 CL 2 t<n m olX- cm >< X> ol-- oH- oz> 2 o z r> 2 UJ 2 t<n O1- h><i >III X tn h<j X cr. tn oK O2 Uz<_ Lz<l 7O H(CH;)L-) H.UCJDJ 7 u<. t7On o _CLlDlI U< 2 a. CC UU><JJ UuOILJi to uz<. tXn 1CXUoL-J tn d zd UNJl -- o u_ tn oz u_ X1UUJ-J J- X Z cc dz u_ UXhUJJ- . oz L_* Xnxl JL * <:X> i-- r-- z* H_J UJ oj oUrJ Ho tn s o (<frt u cc <UJ ti> UX CL UJ *** uu tn z>UJ coc z-- < oX >UJ --* Q cc z IMPORTANT: Always specify stoker model number. I 8 -6 0 1 P S -2118 || ( 3 .0 - P S - 7 5 ) ( 4 . 4 - P S -1 1 0 ) ( 6 .4 - P S - 1 6 0 ) | P S -2091 P S -2 0 6 9 12.0 ----------------- __________ ________ 2115_______ P S -2092 1 6 .0 0*9 1 Page 9 me .to. .-4U1 Page 10 401 sfcKItb PNtUMAl 1C SHKtADtK SlUKtK PARTS LIST I INCLUDES ALL STANDARD. OPTIONAL AND EXTRA PARTS FOR 401 SERIES PNEUMATIC SPREADER STOKERS. REFER TO PARTS LIST II FOR COMPONENT PARTS OF GEAR CASE ASSEMBLY NUMBERS SHOWN ON THIS LIST. REFER TO PARTS LIST III FOR COMPONENT PARTS OF UNDERGRATE FAN UNITS AND AIR DUCT ASSEMBLIES. REFER TO PARTS LIST I V FOR COMPONENT PARTS INCLUDED WITH REPLACEMENT CON VEYING FAN ASSEMBLY. REFER TO TABLE I FOR PARTS USED ON STANDARD AND OPTIONAL CONVEYING FAN AND STOKER DRIVE ARRANGEMENTS. FIG. NO. 9412 PART NUMBER PG-iVC 10,1 1412 PG-50 10,11412 PG-51 10412 PG-52 10412 PG-53 8 PS-33 13 PS-379VR 13 PS-381VR 16 PS-468 16 PS-469 16 PS-487 16 PS-488 7 PS-53IR 7 PS-533R 17 17418 18 17 17 PS-800 PS-801 PS-802 PS-803 PS-805 PART NAME QUAN. REQ'D Undergrate Fan Unit....................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit....................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit....................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit.............................................................. Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit...................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Hinge Eyebolt.................................................................................................................... Air Duct and Volumeter Assembly.......................................................................... Used with PG-4C Undergrate Fan Unit. Refer to Parts List III for component parts. Air Duct and Volumeter Assembly........................................................................... Used with PG-50, 51, 52 and 55 Undergrate Fan Units. Refer to Parts List III for component parts. Standard Pin Hole Grate Bar - 8 x 24 In........................................................ Standard Pin Hole Grate Bar - 8 x 36 In........................................................ Grate Support I-Beam for Standard Pin Hole Grates.................................. (Specify number of notches and length required.) Grate Support Channel for Standard Pin Hole Grates ..... (Specify number of notches and length required.! Elbow Asm............................................................................................................................. Consi sts of: 2 - PS-36 Handwheel Eyebolt 1 - PS-531 Elbow 1 - PS-532 Elbow Cover 2 - PS-560 Handwheel Elbow Asm.. . . ...................................................................................................... Consists of: 2 - PS-36 Handwheel Eyebolt 1 - PS-533 Elbow 1 - PS-534 Elbow Cover 2 - PS-560 Handwheel Dump Grate................................................................................................................... Front Grate ................................................................................................................... Cleanout Door Assembly............................................................................................... Bearing Grate. . . ............................................................................................... Side Grate Sleeve ...................................................................................................... As Required As Required As Required As Required As Required 2 As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required IMPORTANT: Always specify stoker model number. 401 StKIfcS PNEUMATIC SPREADER STOKER FIG. NO. 17 17418 17 17 17 18 16 PART NUMBER PS-806 PS-807 PS-808 PS-809 PS-810 PS-819 PS-822 16 PS-849 18 PS-859 IS PS-860 18 PS-943 18 PS- 1007 17 PS-10 10 17 PS-1013 13 PS-I0I8VI 13 PS-1020 17 8 8 8 8 8 8 8 8 2,548 8 8 8 8 8 8 2 5 5 5 5 PS-1057 PS-2000 PS-2001 PS-2002 PS-2003 PS-2004 PS-2005 PS-2008 PS-2009 PS-20II PS-2012 PS-20 15 PS-2018 PS-2020 PS-2021 PS-2022 PS-20 24 PS-2026 PS-2036 PS-2045 PS-2048 PS-2053 PS-2064 PS-2065 PS-2069 PS-2070 PS-2073 PART NAME Side Grate Pin............................ ...... ......................................... Rear Grate.................................. Side Grate - L.H.............................................................. Side Grate - R.H............................................................................ Grate Bar Bearing ..................................................................... Ash Wei 1 Grate............................................................................ Hot Gas Outlet Assembly......................................... Consi sts of: I - PS-823 Hot Gas Outlet I - PS-824 Air Shutter Grate Support Assembly for Standard Pin Hole Grates (Specify number of notches and length required.) Stationary Grate - 36 In......................................................... Stationary Grate - 24 In.............................. Side Plate.......................................................................................... Grate Leg Assembly ..................................................................... Dump Lever. .... ....................................................... Pin....................................................................................................... Air Duct and Volumeter Assembly - 24 In. Long . Used with PG-4C Undergrate Fan Unit. Refer'to Parts List III for component parts. Air Duct and Volumeter Assembly - 24 In. Long . Used with PG-50, 5 1, 52 and 53 Undergrate Fan Units. Refer to Parts List III for component parts. Seal Bar ............. Transfer Housing........................................................................... Transfer Cleanout Upper Cover ..................................... Transfer Cleanout Lower Cover ..................................... Transfer Housing Bottom Plate ..................................... Hand Latch. ..... ............................................. Upper Hinge Bar............................................................ . . Shoulder Screw .......................................................................... Lower Hinge Bar .......................................................................... Knob. .... ................................................................... Shutoff Gate .................................................................................. Gate Guide - L.H.......................................................................... Gate Guide - R.H.......................................................................... Shutoff Gate - Stuffing Box ............................................. Packing Nut Gland................................................................... Shield Plate Assembly ... ...................................... Coal Worm Bearing Housing.................................................... Drier Inlet Housing. ... ...................................... Drier Enclosure Assembly .................................................... Drier Sheet Assembly ............................................................ Drier Cleanout Cover Assembly ..................................... Consists of: I - V-690 Handle I - PS-2050 Cleanout Plate I - PS-2052 Insulation - 3/8 In. I - PS-2235 Insulation - 1/4 In. I - PS-2236 Gasket I - PS-2237 Retainer Plate Access Plate Assembly ........................................................... Consists of: I - PS-2054 Access Plate 1 - PS-2056 Access Plate Shield 2 - PS-2079 Insulation I _ v-690 Handle Upper Damper Guide ............................................. Damper Blade ....... .............................. Chain ................................................................................................ (Used on PS-300 only.) Damper Adjusting Wheel Bracket ..................................... Drier Inlet Top Insulation ............................................ IHPORTART: Always specify stoker model number. -- * Pile No. 7-401 Page 11 (JUAN. REQ'D As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required File No. 7-401 Pape 12 FIG. NO. 5 5 * 5 * 5 5 1 2 2 2 2 2 4 4 4 4 4 4 4 2 4 4 4 4 2 4 4 4 4 4 4 4 5 2 2 2 2 2 4 2 2 8 8 4 4 PART NUMBER PS-2074 PS-2075 PS-2076 PS-2077 PS-2078 PS-2080 PS-2081 PS-2084 PS-2087 PS-2091 PS-2092 PS-2093 PS-2094 PS-2095 PS-2097 PS-2098 PS-2099 PS-2100 PS-2102 PS-2103 PS-2104 PS-2111 PS-2114 PS-2116 PS-2117 PS-2118 PS-2119 PS-2123 PS-2124 PS-2125 PS-2127 PS-2131 PS-2132 PS-2137 PS-2138 PS-2139 PS-2142 PS-2147 PS-2150 PS-2160 PS-2171 PS-2172 PS-2173 PS-2174 PS-2175 PS-2176 16 PS-2177 2 PS-2210 2 PS-2213 2 PS-2214 2 PS-2215 2 PS-2219 401 SERIES PNEUMATIC SPREADER STOKER PART NAME QUAN. REQ'D Drier Inlet Insulation ............................................................................................................... Drier Inlet Wrapper Sheet ..................................... ......... Drier insulation .............................................................................................................................. 9" x 26" x 1-1/4" Lower Side Drier Insulation........................................................................................................ Drier Insulation .............................................................................................................................. 3-1/4" x 26" x 1-1/4" Drier Insulation Wrapper Sheet.......................................................................................... Drier Caal Worm........................................................... ....... .................................... ....... . . . Bin End Coal Worm ...................................................................................................................... Motor Sheave Assembly (Obsolete - replace with PS-2455) .............................. Sprocket .................................................................................................................................................... Drive Chain . ; .............................................................................................................................. (Used on PS-400 only.) Seal Gasket . ..................................................................................................................................... Thrust Bearing ........ .............................. ...... Fan Bearing Housing (Used With PS-2411 Fan Shaft Assembly) . Seal Ring.................................................................................................................................................... Fan Shaft Bearing Oiler ... . .................................................................................. Fan Bearing Housing Vent................................................................... ........................................... Water-Cooled Bearing Retainer .......; ..................................... Fan Support Studs ................................................................................................ ....... Fan Spacer........................................................... ....... ........................................................................ Fan Sheave.................................................................................................................................... (6- 1/2 in. 0. D. ) Fan Inlet Cover Plate............................................................................................................... First Stage Fan Liner (Also Order ( I) PS-2485 All) PS-2484 Fan Housing Seal I . Interstage Fan ..................................................................................................................................... Second Stage Fan Liner (Also Order I I) PS-2485 Fan Housing Seal) Drive Chain .... ............................................................................................................... (Used on PS-75, IIO, 160 and 200.) Conveyor Fan Housing .... ......................................................................................... Back Plate Insulation - 3/8 In. Thick .......................................................................... Back Plate insulation - 1/4 In. Thick .... ............................................ Insulation Cover Sheet ............................................................................................................... Air Duct................................................................................................................................................... Air Duct Gasket..................................................................................................................................... Wrapper Sheet .......... ..................................... ... Drier Insulation - Fan Side....................................................................................................... Motor Shaft Key - 2 In. Long ................................................................................................ Motor Sheave Key - I In. Long . ........................................................................................ Motor Plate ............................................................................................................................................ Gear Case Support ............................................................................................................................. Gear Case Drive Belt ... ........................................................................................ Fan Bearing Housing Support. ........ .............................. Bearing Housing Gasket .................................................... ........ Worm Housing Gasket ............................................................................................................... Bottom Plate Gasket........................................................................................................................ Stuffing Box Gasket.......................................................................... ........................................... Air Duct Clamp Gasket..................................................................................................................... Balancing Hub Assembly .............................................................................................................. IncIudes: 3 - PS-2362 Balancing Weight Coal Worm Sprocket Spanner ... .............................. ....... Fan Drive Belt ....... ................................................................................. Used on Model PS-75. Motor Plate Hinge ............................................................................................................................ Fan Sheave ........................................................................................................................................... Used on Models PS-1 10 and PS-160. Fan Sheave ........................................................................................................................................... Fan Sheave . ............................................ ....... ........................................................... Used on Model PS-75. ' Not i llustrated. Refer to Table I for usage. 6 1 2 1 2 2 3 3 ** 2 ** IMPORTANT: Always specify stoker model number. FIG. NO. 2 2 2 2 4 2 2 2 1 4 2 2 5 2 8 2 5 2 2 2 2 2 2 4 4 -- 2 2 2 15 4 4 14 5 5 6 4 15 401 SERIES PNEUMATIC SPREADER STOKER 'F$le No. 7-401 Page 13 PART NUMBER PART NAME QUAN. REQ'D PS-2220 PS-2221 PS-2222 PS-2224 PS-2226 PS-2228 PS-22 34 PS-2241 PS-2246 PS-22 54 PS-2257 PS-2266 PS-229 1 PS-2295- PS-2298 PS-2299 PS-2300 PS-23 02 PS-2303 PS-2304 PS-2305 PS-2306 PS-2307 PS-2350 PS-2353 PS-23 57 PS-2359 PS-236 1 PS-2365 PS-2379 PS-2410 PS-2411 PS-2413 PS-2415 PS-2418 PS-2427 PS-2430 PS-2431 Fan Drive Belt . Fan Drive Belt . Motor Sheave Assembly (Obsolete - replace with PS-24551............................ Motor Sheave Assembly (Obsolete - replace with PS-24541............................ Air Duct Clamp . Coal Worm Housing Bearing ........................................................................... Motor Plate Hinge . Sheave Housing Support Belt Guard . . . . Belt Guard Support Clip ....................................................................................................... Oil Drain Pan . Chain Guard . . . . Drier Inlet Gasket. Belt Guard Bracket. Overflow Tube Cooling Tube Assembly. Access Cover Gasket . Gear Case Assembly. Gear Case Assembly. Used on Model PS-1 10. (See figure 3 and Parts List II for component parts. ) Gear Case Assembly. Used on Model PS-160. (See figure 3 and Parts List 11 for component parts. ) Gear Case Assembly. Used on Model PS-200. (See figure 3 and Parts List II for component parts. ) Gear Case Assembly. Used on Model PS-300. (See figure 3 and Parts List II for component parts. I Gear Case Assembly. Used on Model PS-400. (See figure 3 and Parts List II for component parts. ) Seal Plate .... Dust Check Ring. Cooling Tube Clamp. Motor Plate Hinge Screw........................................................................... ...... Fan Drive Belt . Motor Sheave Assembly (Obsolete - replace with PS-2457 1 ..... Coal Agitator Assembly Consists of: 1 - PS-2380 Agitator Bracket l - PS-2385 Clamp Plate 2 - PS-239 1 Retainer Ring 2- V-5252 Agitator Wheel Arm 1 - PS-2386 Agitator Wheel - R.H. 2 - 17023 Agitator Bearing 1 - PS-2387 Agitator Wheel - L.H. 4 - 17027 Thrust Bearing 2 - PS-2390 Shaft 4 - 17028 Beari ng Retaining Ring . Fan Shaft Assembly (Used With PS-2095 Fan Bearing Housing) .... Consists of: 2 - PS-1123 Fan Shaft Bearing N.D. #87507 1 - PS-2105 Fan Shaft Nozzle Assembly. 2- PS-2460 Oiler Guide 1 - 38298 Spacer 4 - 41020 Retainer Ring Consi sts of: 1 - PS-44 Nozzle Hinge Pin 1 -- PS-45 Nozzle Control Rod 1 - PS-47 Nozzle Handwheel 1 - PS-81 Nozzle Body 2 - PS-309 Sleeve Cover Plate 2- PS-311 Support U Bolt l " PS-2100 Nozzle End 1 - PS-2181 l-in. Deflector 1 - PS-2182 1- l/2-i n. Deflector 1 - PS-30BA Support Assembly 1 - PS-2183 2-1/2-ln. Deflector Baffle - R.H. . . . Baffle - L.H. . . . Obstruction Guide Housing ......................................................................... .... Fan Housing Seal Coal Agitator Shaft * Refer to Table I for usage. *2* r i* i i i i i 2 i i i i i i i i i i i i i 2 1 1 2 2* r i i i i i i i i 2 IMPORTANT: Always specify stoker model number. File No. 7-401 Page 14 140 I SERIES PNEUMATIC SPREADER STOKER FIG. HO. PART NUMBER PART NAME QUAN. REQ'D 15 15 4 4 2 2 2 2 4 4 4 4 4 4 4 4 16 16 16 17 16 16 16 16 16 16 17 2&4 4 6 6 6 6 8 2 2 2 5 5 6 6 6 6 6 1 1 2 2 2 2 2 4-2 PS-2432 PS-2433 PS-2434 PS-2440 PS-2452 PS-2454 PS-2455 PS-2457 PS-2459 PS-2461 PS-2462 PS-2463 PS-2465 PS-2468 PS-2484 PS-2485 S-I009R S-IOI IR S- 10 12 S- 1049 S- 1050 S- I050R S-I057R S-I058R S- I059R S-1098 S- 1099 40048 40125 41039 41040 41041 41042 41043 41344 41350 41526 51060 51061 5 1062 51064 51065 51066 51067 51070 51071 51102 51 1 13 51114 511 18 80348 80689 Thrust Bearing ........................................................................................................................... 4 Bearing......................................... ............................................................................................... 4 Fan Wheel......................................................................................................................................... 2 Sliding Nipple Assembly ............................................................. . ............................ Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly.................................................................... ...... ................................. 1 *1 *t *| *I Conveying Fan Assembly ...................................................................................................... Refer to Parts List IV for Component Parts 1 Balance Ring. . ............................................................................................................. Inner Balance Ring.................................................................................................................... 2 1 . _Fan Bearing Housing (Used with PS-2468 Fan Shaft Asm.), ..... 1 1 Fan Shaft Assembly (Used With PS-2463 Fan Bearing Housing) .... 1 Consists of: 4 - 40120 Retainer Ring 1 - 38298 Spacer 1 - PS-2 105 Fan Shaft 1 - PS-2466 Bearing - N.D. #97507 2 - PS-2460 Oiler Guide 1 - PS-2467 Bearing - N.D. #97607 Fan Housing Seal - (Used With New Style PS-2114 First Stage Liner Sheet) 1 Fan Housing Seal - (Used With New Style First and Second Stage Liner) 2 Ash Hoe and Handle - l-in. Pipe . . .................................................................... Used with pin-hole type grates. 1 Clinker Rake and Handle - l-in. Pipe. . . . ................................................ 1 Refractory Tile Slab - 3" x 6" x 18"........................................................................... Used over nozzle opening in front wall. 1 Air Cylinder Assembly for Dump Grates .................................................................... As Required Ash Hoe ........ .................................................................................. 1 Ash Hoe and Handle - l-in. Pipe .................................................................................. Used with ribbed-type grates. 1 Clinker Hook and Handle - 3/4-in. Pipe . . ....................................................... 1 Slice Bar and Handle - l-in. Pipe, ... ....................................................... 1 Slice Bar and Handle - l-l/2-in. Pipe.................................................................... 1 Hot Gas Temperature Indicator - 12-in......................................................................... 1 Steam Cylinder Assembly for Dump Grates.................................................................... As Required 3 Retainer Ring............................................................................................... 2 Toggle Handle ............................................................. . ................................................ 1 Toggle Link.................................................................... ...... ................................................ 1 Lock Pin.......................................................................................................................... I Lock Pin ................................................................................................................................. 1 Motor Adjusting Bolt ............................................................................................................. 2 Cable Spring......................................... ............................................................ ...... 1 Quadrant Cable Assembly . ................................................................................. 1 Sheave and Housing Assembly...................................................... ...... 1 Consists of: 1 - 41231 Sheave Housing 1 - 40076 Spacer 1 - 41232 Sheave Housing Cover 2 - 40078 Washer 1 - 41527 Cable Sheave Worm Coupl ing Nut......................................... ...... ................................................................... Worm Coupling PIug. ...................................................................................................... Worm Cleanout Housing. ... ................................................................................. Cleanout Stud .......................................................................................................................... Worm Cleanout Housing Cover. ........................................................................................ Worm Cleanout Housing Gasket ......... ........................... Bin Plate............................................................................................... ...... ................................. Bin Channel............................................................. ................................................................... Bin Worm Bearing...................................................... ............................................................ Lock Nut......................................... ...... ....................................................................................... Lock Washer............................................................. ................................................................... Motor Adjusting Bracket ..................................................................................................... Flare Nut (Not Illustrated)............................................................................................... Brass Elbow................................................................................................................................. ' Refer to Table I for usage 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 IMPORTANT: Always specify stoker model number. HOI SERIES PNEUMATIC SPREADER STOKER FIG. NO. 3 3 3 3 3 3 3 3 3 3* 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 S 3 3 3 3 3 3 3 3 3 3 '3 .3 3 3 3 3 3 3 3 3 3 3 3 *3 3 3 3 3 PARTS LIST II COMPONENT PARTS OF PS GEAR CASE ASSEMBLIES PART NUMBER PART NAME A-116 PS-2025 PS-2184 PS-2240 PS-2271 PS-2272 PS-2273 PS-2274 _ PS-2275 PS-2276 PS-2292 40029 40030 40031 40036 40048 40061 40062 40063 40064 40066 40069 40073 40074 40075 40076 40078 40085 40086 40091 40093 40094 40100 40101 40106 40109 40110 40111 40112 40116 40124 40125 40126 40129 40136 40152 40153 40154 40155 40163 40168 40173 40176 40181 40182 50009 50010 Ball Bearing (N.D.-7505). . . . Orive Sprocket - 21 Teeth . Used on Model PS-400 only. Quadrant ......................................................... Drive Sprocket - 16 Teeth . . . Used on Model PS-300 only. Cam....................................................................... Cam....................................................................... Cam............................................................... Cam..................................................................... Cam....................................................................... Cam....................................................................... Cam Adjusting Washer ............................. Collector Plate......................................... Finger Spring ......................................... Shoulder Screw .......................................... Bearing Stop Cover Shim . . . . Spring Key .................................................. Cam Follower................................................ Cam Roller . . ................................... Cam Roller Stud. . , Spring............................................................... Coal Feed Quadrant Arm .... Air Adjustment Quadrant Arm. Air Adjustment Sheave. .... Eccentric Bushing . ............................ Air Adjustment Pivot Screw . Air Adjustment Spacer............................. Air Adjustment Washer............................. Plug.............................................................. PIug .............................................................. Overload Release Pin............................. Ball Bearing (N.O. 7507). . .. Ball Bearing (N.O. 55507) Ball Bearing (N.O. 7506). Ball Bearing (N.D. 88035) Oil Seal (Hat. 140328) .... Oil Seal (Vital ic 6318) . . . . Bearing (Oilite A-956) .... Bearing (Oilite T-I303-I) Bearing (Oilite) Bearing (Oilite A-1167-2) . . . Retainer Ring (Eaton International) Retainer Ring (Eaton International) Retainer Ring (Waldes Truarc) . . Knob ............................................................... Low Speed Shaft Key ............................. Washer (ABEC-W-07).................................. Lock Nut (ABEC-N-07)........................... Acorn Nut - Upper.................................. Acorn Hut - Lower .................................. Oil Gauge........................................................ Key...................................................................... Chain Retainer Pulley............................. Name Plate................................................. Quadrant Arm Stop.................................. Retainer Screw......................................... Gear Case....................................................... Gear Case Cover......................................... 1 Hot illustrated. IHPORTAHT: Always specify stoker model number. File No. 7-401 Page 15 QUAH. REQ'O As Req uired As Required 3 1 2 2 I 4 I 3 1 2 2 1 2 I I I I 1 3 3 2 File No. 7-401 Page 16 401 SERIES PNEUMATIC SPREADER STOKER - FIG. NO. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 PART NUMBER PART NAME 500 12 500 13 50014 50015 500 16 50017 50018 50019 50020 50023 50024 50025 50026 50028 50029 50030 50031 50033 50034 50035 50036 50037 50038 50039 50040 50041 50042 50043 50044 50045 50046 50047 50050 50057 50058 50059 50060 50061 50062 50063 50064 50065 50066 50067 50068 50069 50070 50071 50072 50073 50075 50077 50085 50089 50093 501 15 50118 50120 50121 50122 50123 50124 Main Worm Shaft............................................................................................................................ Main Worm Gear............................................................................................................................ Differential Worm Shaft ........ ................................................. Differential Worm Gear....................................................................................................... Low Speed Shaft............................................................................................................................ Spacer................................................................................................................................................. Internal Gear ............................................................................................................................ Sun Pinion Gear............................................................................................................................ Spider Assembly............................................................................................................................ Planet Gear ................................................................................................................................... Inner Spider. .... ................................................................................................. Thrust Washer ... ........................................................................................................ Thrust Washer .... ................................................................................................. . __ Back Gear Hub ............................................................................................................................ Spring.......................................... ......................................... ....................................................... Drive Shaft Key............................................................................ ............................................... Drive Shaft ................................................................................................................................... Drive Shaft Shim ..................................................................................................................... Drive Sprocket - II Teeth ....... ................................................. Used on PS-50, 75, 110, 160 and 200. Shear Pin.......................................................................................................................................... Shear Pin Retainer..................................................................................................................... Main Worm Bearing Retainer ... ............................................................................ Differential Worm Bearing Retainer . ..................................................................... Main Worm Bearing Retainer Gasket. , ..................................................................... Differential Worm Bearing Retainer Gasket .............................................................. Input Sheave.............................................................. ........................................ Si iding Sheave............................................................................................................................ Adjusting Sheave ..................................................................................................................... Bearing Housing............................................................................................................................ Sheave Drive Pin................................... ...... .................................. ...... .................................. Bushing............................................................................ '......................................................... Belt Shifter Support.............................................................................................................. Beit Shifter Assembly.............................................................................................................. Consists of: 1 - .50097 Belt Shifter - Front Half 1 - 50098 Belt Shifter - Rear Half Spring Washer ....................................................... . ....................................................... Spring Washer ..... ............................ ......... Oil Seal Housing....................................................................................................... Snap Ring.......................................................................................................................................... Ball Bearing (N.D. 7607)....................................................................................................... Ball Bearing (N.D. 5507). ............................................................................ ...... Ball Bearing (N.D. 993L09) ................................................................................................ Needle Bearing (Tor. B-I2I0X)......................................................................................... Needle Bearing (Tor. B-24I4XQH).............................................................. ....... Bearing (Oilite A-1213-2)......................................... ...... ............................................... Bearing (Oilite A-1623)....................................................................................................... Oil Seal (Nat. 50135).............................................................................................................. Oil Seal (Nat. 504 52).............................................................................................................. Oil Seal (Nat. 50055-S)....................................................................................................... Retainer Ring (Wal. NAS 51-175) ................................................................................... Retainer Ring (Wal. No. 51-325) ............................................................................ Retainer Ring (Wal. NAS 51-118).................................................................................. Retainer Ring (Wal. NAS 50-300)................................................. Wide V Bel t.................................................................................................................................. Lock Washer.................................................................................................................................. Oil Distributor. .......................................... ...... .................................................................... Oil Distributor Chain.............................................................. ....... Dowel Pin.................................................................................. ............................................... Gear . ....................................................................................................... ...... Oil Elevating Pulley.............................................................................................................. Chain Retainer Pulley Screw. ....................................................... ..... Cover Bearing Stop.............................................................. ...... ............................................... Case Bearing Stop .................................................................................................................... Worm Wheel Shim .................................................................................................................... QUAN. REQ'D 1 1 1 1 1 1 1 1 1 3 1 1 1 1 3 1 1 As Required 1 As Required 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 1 1 1 1 2 6 2 2 1 1 1 1 2 1 1 2 1 1 1 1 2 1 i 1 1 1 As Required IMPORTANT: Always specify stoker model number. FIG. NO. 3 3 3 3 PART NUMBER 50 125 50126 50129 50139 401 SERIES PNEUMATIC SPREADER STOKER PART NAME Worm Wheel Shim. .... Pointer .......................................... Internal Gear Bearing Retainer Overload Switch Assembly. Consl sts of: I - 40079 Box I - 40080 Actuator Lever I - 40083 Spring I - 40084 Spring I - 40115 Bear! ng I - 40130 Nut I - 40134 Insulation I - 50116 Reset Lever I - 50117 Reset Spacer I - 50138 Conduit 1 - 50230 Switch Asm. 2 - 80263 Anti-Short Bushing I - 81472 90 Connector File No. 7-401 Page 17 QUAN. REQ'D As Required 2 Figure 9 - PG-4C Undergrate Fan Unit - Refer to Parts List III (Pg 24) rue i>io. (-4UI Page 18 HO I SERIES PNEUMATIC SPREADER STOKER Figure 10 - PG-50, 51, 52 and 53 Single Undergrate Fan Units - Refer to Parts List III (Pi 21) Figure 11 - Duplex Fan Unit - Refer to Parts List III (Pg 21) IHPORTART: Always specify stoker model number. "TU I UUIVt Uv* I IIUWi PS-187 ps-asi Jtt_____ Page 19 Figure 12 - Internal Parts of Undergrate Fan Units - Refer to Parts List III (Pg 21) AIR DUCT ASSEMBLIES PS-379 PS-1019 V-5835A PS-736 V-5317 V-5823 PS-252 V-652U V-6527 PIN V-6526 Figure 13 - Volumeter Air Duct Parts - Refer to Parts List III (Pg 21) IMPORTANT: Aluiays specify stoker model number Page 20 ) , MJ -1 < l_ c >zo t- vs V> CM 0. o a. x VS VS 4 4 a. vs <v os a. Jwo o o VS Cl. z C; a VS <0 vos fx 4 VS 4 Vs a. oS> O LJ <s u <u ss 2o VI 0 9 VS a. <2 c. z rs o <0 o s 0 <0 vs > cv - O (V Ct _ ic 2* V) N s CL rs (i Cl VS IO o vs 4 9 4 VS vs =: > - _o z o < *3 U Pi 9 !> a s o to o vs 4 a) 4 s in in VI L > e0g PS O U> a. -/ < w c 2o V) (0 vs a. O a. VS o O9 o<> VS ft `VS \ m > ow ce _j 4O > zu < vs V) ra vs IL X q. O VS VS 4 9 S. 4 <4 vas. " - o 0 sgB Cl S g Si X o o o <0 fx 4 VS 9 \ / V) tog v, a. 0*0 " " O tv 02 -J 4 <J SC < H- O Vi <0 son a. ti X CL o o 0 |x s - in > O UI a -i 4 j 15 H vs & vs X vs o in n CL 4 0n. - j ij o o IX a. ISgISw VS CL X ITS fcsg a. 9 o vs in to p* CL - <0 0 - VI 9 .s PS v to - V> N vs a CL - VS 9 9 <0 - vs 9 o \ <0 - VS vs s a. - 0 O o 9 0 0 o PS o 10 0 <J o - - - vs 10 vs a X - 9 0 40 N VS cv ? rs to r VS CO - VI 0. - 0 vs 9 9 a. 0 ~ 4 vs (V 4 x* <r> PS (V <0 0 rs <v - VS vs as a - 0 2 4 Cl CM <0 ~ o <0 a> CJ o <0 o - VI a. - 0 px 9 - vs 9 rs cv o 10 - 0 cv rx vs vs 0 m 9 -9 a. 0 - in 9 rs o S rs - fx vs CO VS - o 94 a. - o o0 <0 to - vs ffi - v> 0 o o -9 CL 0 - m - CV <o0 a- V) 0 V) 9 -9 CL - no to 0 rx - vs as <A 0 - 94 CL IV a -J 5 zo 2o VS <0 vs a X o O <0 VS rx 4 L 0 in - - o PS 10 0 rs 10 Vi - 9 COt I-VI 4 o> z 2S 3. o. X VS o vs 4 4 - vs a. - vs vs rs fx 9 vs - px - vs a. ID - VS a. - 01 JUlg o a. X ;! CL O ^ a. o o vs t0 r~ 4 4 O ur CE -1 < a> z (V < o VS (0 u 0. a. X vs 4 10 ' 4 CO 4 VS CL - vs vs rs 9 O - !- s - Px vs B. VS a. - z rs o 9 - 3S <0 - vs rs V) 0 a. - =1 u 4 a > a Ml w o Ml Sf Ml 4 L? a. K K 4 X 6 z b. U. Ml VS > MJ < > Mi 2 in CE o Q > O a ui vs 3 o 6 IV K O as > i- Zj tJ K Z vs < o z L. 0 O Sit .% o Za o 2 CL CE o 2 >- VS VS z e> z z o oo Hi a M mi vs O V) Z 3Z < UJ S- ce 4 v a. _> Ml MJ n. b. U. -J > O m ui in xo z 4 > vs D as < X gi > -J Z < Z u. < uJ < V) S- Z < i 5!` iL. s s" Sg a 0 0N | P S .75 I IMPORTANT. 4iways specify stoker mode L number 401 SERIES PNEUMATIC SPREADER STOKER " File No. 7-401 Page 21 PARTS LIST III COMPONENT PARTS OF UNDERGRATE FAN UN ITS AND VOLUMETER AIR DUCT ASSEMBLIES. SEE TABLE II FOR USAGE AND DATA REGARDING UNDERGRATE FANS. FIG. HO. PART NUMBER 12 A-86 12 C-80R 10 94 10 * 12 12 12 12 11 12 9 * 9 10 13 C-86 PF-0020 PF-0022 PF-0023 PF-0025 PF-0206 PF-0219 PF-0235 PS-120 PS-I2IR PS-I22R PS-131 PS-158 PS-187 PS-2 57 PS-325 PS-368 PS-372 PS-379VR 13 PS-381VR .2 PS-390 9 PS-395 9 PS-396 PART NAME Felt Washer Drive End . Fan Wheel Assembly Consists of: I - C-80 Fan Hub I - V--561 | Fan Wheel Spacer I - V-56I3A Fan wheel - 4 x 14-1/2 in. | - V-56I4A Fan Wheel - 7 x 14-1/2 in. Felt Washer Drive End . . . 1/2-14 x 1-3/4- In. Hippie . . . . 1/2-14x3 In. Nipple.............................. 1/2-14x4 In. Nipple . . . I- 14 x 15-3/4 Pipe..................................... 90 Ell .................................................................... Cable Pipe ............................................................ Bushing - l/4-in. x l/2-in. Fan Shaft............................................................ Fan Wheel - R.H.................................................. 7 in. x 14-1/2 in. Fan Wheel - L.H.................................................. 7 in. x 14-1/2 in. Fan Shaft Bearing. . .............................. Lower Tie Strap ............................................. Fan Sheave ............................................................ Motor Spacing Bar............................................. Belt Guard Spacer............................................. Motor Plate............................................................ Belt Guard ......... Air Duct and Volumeter Assembly . Consists of: - PS-379 Ai r Duct - PS-389 Volumeter Air Tube - PS-7 36 Volumeter Diaphragm - V-2318 Regulator Rod Quadrant - V-5 I35A Regulator Panel - V-5317 Volumeter Lower Housing - V-58 2 3 Regulator Damper Rod - V-5835A Volumeter Upper Housing - V-6524 Diaphragm Piston Rod - V-6526 Piston Rod Yoke - V-6527 Yoke Pin - V-6535 Regulator Blade Air Duct and Volumeter Assembly . Consists of: PS-252 Regulator Damper Rod PS-255 Volumeter Air Tube PS-381 Air Duct PS-734 Regulator Blade PS-736 Volumeter Diaphragm V-2318 Regulator Rod Quadrant V-5I85A Regulator Panel V-5317 Lower Volumeter Housing V-5835A Upper Volumeter Housing V-6524 Diaphragm Piston Rod V-6526 Piston Rod Yoke V-6527 Yoke Pin Fan Inlet Ring.................................................... Fan Wheel............................................................ Fan Housing............................................................ (JUAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 1 2222 1 2 1 1 22 2 i I 1 1 22 i 2244 i 1 1 22 1 122 1 1 22 1 1 22 1 1 22 i 2244 2 2' i 2 2 1 11 1 1 1 22 2 22 44 1 1 * Not illustrated. IHP0RTANT: Always specify stoker model number File No. 7-401 Pag*- 22 FIG. NO. PART NUMBER 401 SERIES PNEUMATIC SPREADER STOKER PART NAME & PS-900 9 PS-416 10 PS-422 9 PS-424 9 PS-475 10 PS-476 9410 9 13 PS-461 PS-482 PS-I0I8VR 13 PS-1020 9&I0 10 9 10 10 10 12 II 9410 9410 9410 9410 10 10 PS-2265 PS-2278 PS-2279 PS-2281 PS-2282 PS-2296 PS-2366 PS-2367 PS-2369 PS-2371 PS-2372 PS-2375 PS-2392 PS-2393 Belt Guard Spacer................................................................... Motor Sheave .......................................................................... Motor Sheave .......................................................................... Belt Guard................................................................... Fan Housing Assembly............................................................ Consi sts of: I - PS-352 Lower Tie Plate 1 - PS-354A Body Sheet 8 - PS-356 Tie Rod 2 - PS-357 Body Sheet Gasket 1 - PS-477 Leg - R. H. J, - PS-478 Leg - L'. H. Fan Housing.................................................... ....... Consists of: 2 - PS-357 Body Sheet Gasket I - PS-364 Body Sheet 8 - PS-366 Tie Rod I - PS-477A Leg - R. H. I - PS-478 A Leg - L.H. Indicator Vane Rod Bearing Plate.............................. Indicator Vane Rod ............................................................ Air Duct and Volumeter Assembly - 24 In. Long Consists of: I - PS-389 Volumeter Air Tube I - PS-736 Volumeter Diaphragm I - PS-1019 Air Duct - 24 in. Long I - V-2318 Regulator Rod Quadrant I - V-5I85A Regulator Panel I - V-5317 Volumeter Lower Housing I - V-5823 Regulator Damper Rod I - V-5835A Volumeter Upper Housing I - V-6524 Diaphragm Piston Rod I - V-6526 Piston Rod Yoke I - V-6527 Yoke Pin I -V-6535 Regulator Blade Air Duct and Volumeter Assembly - 24 In. Long Consists of: I -PS-252 Regulator Damper Rod I - PS-255 Volumeter Air Tube I -PS-734 Regulator Blade I -PS-736 Volumeter Diaphragm I -PS-1021 Air Duct - 24 in. Long I - V-2318 Regulator Rod Quadrant I - V-5I85A Regulator Panel I - V-5317 Lower Volumeter Housing I - V-5835A Upper Volumeter Housing I - V-6524 Diaphragm Piston Rod I - V-65 26 Piston Rod Yoke I - V-6527 Yoke Pin Indicator Vane Frame............................................................ Indicator Vane Plate. ........ Indicator Vane Plate............................................................ Indicator Vane Rod ............................................................ Indicator Vane Rod ............................................................ Indicator Valve ................................................................... Fan Sheave.................................................... Belt Guard . .......................................................................... Indicator Cable ................................................................... Cable Connector ................................................................... Pipe Bracket .............................. ...... Sheave Housing Bracket .................................................... Motor Plate................................................................................ Indicator Air Tube............................................................ As required IMPORTANT: Aluays specify stoker model number <?UAN. RtQ'D PG PG PG 4C 51 53 FIG. NO. 1I m 12 9*10 94 10 12 12 12 12 10 10 10 11 12 12 12 12 11 10 9& 10 9410 94 10 9410 9,10aII 10 10 9 1*2 * 9 9 9 9 PART NUMBER PS-2394 PS-2395 PS- 2458 V-lll V-- 524 V-620 V-623 V-624 V-779 V-0222, V-0225 V-0233 V-5020 V-5507 V-5508 V-5512 V-5524 V-5553 V-5616 41436 41473 41477 41526 51123 51466 51467 PS-377 PS-421 PS-4 25 PS-426 PS-427 PS-430 PS-432 PS-434 PS-435 Motor 401 SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 23 PART NAME Belt - Goodvear B-62.......................................................................................... Button Pltia.............................................................................................................. Fan Shaft Assembly .......................................................................................... Consists of: 1 - PS- 13 1 Bearing 1 - PS-367 Fan Shaft Fan Screen .............................................................................................................. Fan Screen Ring ................................................................................................. Bearing Cover Plate .......................................................................................... Bearing Retainer ................................................................................................ Bearing Cover Plate - Drive End .............................................................. Bearing Retainer - Drive End.................................. .................................. Motor Plate Spacer................................... ...... ................................................ l/2-in. dia. x l/4-in. pipe Motor Plate Spacer .......................................................................................... 1/2-in. dia. x 5/8-in. pipe Motor Plate Spacer .......................................................................................... 1/2-in. dia. x 1-5/ 8- in. pipe Motor Sheave.......................................... ...... ...................................................... Bearing Retainer - Drive End .............................................................. Bearing Retainer ................................................................................................ Bearing Retainer Washer. ....... ............................ Fan Shaft Nut ....................................................................................................... Motor Sheave ....................................................................................................... Motor Sheave ....................................................................................................... Indicator Valve Body Weight .... .......................................... Indicator Valve ....... ................................................. Indicator Valve Body. . ..................................................................... Housing and Sheave Assembly ... ................................................ Consi sts of: 1 - 40076 Spacer 2 - 40 078 Washer 1 - 41221 Sheave Housing 1 - 41232 Sheave Housing Cover 1 - 4 1527 Cable Sheave Belt - Goodyear B-60............................ ...... -................................... Air Tube Elbow ....... ................................................ Air Tube Connector ......................................................................................... PARTS USED WITH 25 CYCLE MOTOR ON PG-4C FAN UNIT Motor Plate.............................................................................................................. Motor Sheave.......................................... ...... ........................................ ...... . Auxiliary Fan Housing Inner Plate....................................................... Auxiliary Fan Housing Band........................................................................... Auxiliary Fan Housing Outer Plate ....................................................... Fan Wheel ........ ....................................................... l-in. x 14- 1/2- in. Belt Guard .............................................................................................................. Motor Spacing Bar................................................................................................ Belt - Gates #3680 ......................................................................................... 1 H.P.-I450 R.P.M., 220 Volt, 25 Cycle, 3 Phase, BallBearing K-224 Frame QUAN. REQ'D PG PG PG PG PG 4C bO 51 52 S3 2 i 1 22 1 1 i 1 22 1 i 1 22 1 i 1 22 1 i 122 2 224 4 1 1 22 44 4 4 1 2 1 1 22 1 1 22 1 122 1 1 122 1 1 1 1 1 22 1111i 1 1 1 22 1 1 1 22 1 111 1 122 3366 1 1 I 1 1 1 1 2 1 PARTS USED WITH 60 CYCLE OVERSPEED ON PG-4C FAN UNIT 9 PS-377 10 PS-421 9 PS-432 9 PS-434 9 PS-435 Motor Motor Plate.............................................................................................................. Motor Sheave ....................................................................................................... Belt'Guard.............................................................................................................. Motor Spacing Bar................................................................................................ Belt - Gates #3680 ......................................................................................... 2 H.P., 1750 R.P.M., 220 Volt, 60 Cycle, 3 Phase, K-224 Frame 1 A'ot illustrated. 1 1 1 2 1 IMPORTANT: Always specify- stoker model number File No. 7-401 Pag". 24 MOI SERIES PNEUMATIC SPREADER STOKER FIG. NO. * * * * * * * * * PART NUMBER PS-923 PS-927 PS-885 PS-889 PS-893 PS-898 PS-903 PS-907 PS-911 PS-919 PS-925 PS-929 PART NAME OPTIONAL AIR DUCT EXTENSIONS AND ELBOWS FOR UNDERGRATE FAN UNITS Air Duct Extension - 24-In. .................................................................... Air Duct Extension - 48-In. . .................................................................... 45 Elbow - Horizontal......................................... ............................................... 45 Elbow - Horizontal.................................................................... ...... 90 Elbow - Horizontal......................................................................................... 90 Elbbw - Horizontal. ..... ......................................... Vertical Elbow - Rectangular Outlet ......... Vertical Elbow - Rectangular Outlet . . ........................... . , Vertical Elbow - Square Outlet .................................................................... Vertical Elbow - Side Outlet...................................................... ATr Duct Extension - 24-In. ... ....................................................... Air Duct Extension - 48-In. . . . ....................................................... * Not 11 lustrated ** As Required <?UAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 ** ** ** ** ** ** *W ** ** ** * ** ** * * ** ** * * * ** ** ** ** ** ** ** * ** ** ** * ** ** * J PARTS LIST IV COMPONENT PARTS OF PS-2470 REPLACEMENT CONVEYOR FAN ASSEMBLY FIG. NO. PART NO. PART NAME QUAN. REQ'D PF-0225 Butt Nipple - 3/4-14 X 1" Long-Straight Pipe Thread (Not Illustrated) . PF-0358 Nipple - 1/4" X 6" Long-For PS-2098 Fan Shaft Oiler (Not Illustrated) . 4 PS-2097 Seal Ring.................................................. .......................... .... ...................................................... 4 PS-2098 Fan Shaft Oiler........................................................................................... .... ...................... .... 4 PS-2099 Breather Tube ............................................................................................................................... 4 PS-2100 Water CooledBearing Retainer . . . 4 PS-2102 Leveling Studs.................................................. 4 PS-2103 Fan Spacer......................................... . . . . 4 PS-2111 Fan Inlet Plate............................................... 4 PS-2114 First Stage Liner ......................................... 4 PS-2116 Fan Interstage............................................... 4 PS-2117 Second Stage Liner....................... .... . . . 4 PS-2119 Conveyor Fan Housing..................................... 4 PS-2123 Back Plate Insulation - 3/8" Thick. . 4 PS-2125 Insulation Cover Sheet................................. 4 PS-2132 Wrapper Sheet................................ .... . . . 4 PS-2160 Fan Bearing Housing Support .................. 4 PS-2176 Balancing Hub Assembly................................. 4 PS-2350 Seal Plate........................................................... 4 PS-2353 Dust Check Ring .............................................. 4 PS-2410 Retainer Ring .................................................. 4 PS-2434 Fan Wheel ............................................................ 4 PS-246 1 Balance Ring............................ ........................... 4 PS-2462 Inner Balance Ring.......................................... 4 PS-2463 Fan Bearing Housing..................................... 4 PS-2465 Gasket.................................................................... 4 PS-2468 Fan Shaft Assembly.......................................... Consists of: 4 - 40120 Retainer Ring 1 - PS-2105 Fan Shaft I - 58298 Spacer I - PS-2466 Bearing -N.D. 2 - PS-2460 Oiler Guide #97507 t - PS-2467 Bearing - N. D. #97607 4 PS-2484 Fan Housing Seal.............................................. 4 PS-2485 Fan Housing Seal....................... .... . . . . 4 40048 Key ......................................................................... 80348 Flare Nut (Not Illustrated) .................. 4 80689 Brass Elbow ....................................................... 1 1 1 1 1 IMPORTANT: Always specify stoker model number 4U I btKItb KNtUMAIIL brKtAUtK hlUKtK - "tile ixo. (-401 Page 25 Figure 14 - PS-2413 Nozzle Assembly - Refer to Parts List I (Pg 10) Figure 15 - Coal Agitator Parts - Refer to Parts List I (Pg 10) IMPORTANT: Aluavs specify sioner model number Ps-488 S-IOI2 S-'0S7pi . 401 SERIES PNEUMATIC SPREADER STOKER File*No. 7-401 Page 27 F ig u re 17 - Dump G ra te P a rts - R e fe r to P a r ts L i s t (P g 1 0 )I IHPCRTAXT: Always specify sterner model number File No. 7-401 Page 28 401 SERIES PNEUMATIC SPREADER STOKER F ig u re 18 - S ta tio n a r y G ra te F a rts - R e fe r to P a rts L i s t (P g 1 0 )I e> < Ld CO Uoi IMPORTANT: Always specify stoker model number File No. 7-401 REPLACEMENT PARTS 401 Series Pneumatic Spreader Stokers Figure 1 --FS-401 Series Pneumatic Spreader Stoker - Refer to Parts List I (Pg 10) MODELS COVERED - 1949-1964 MODEL PS-75 PS-1 10 PS-160 MODEL PS-200 PS-300 PS-400 IUPORTANT: Always specify stoker model number and serial number when ordering. GENERAL. Replacement parts for the 401 Series Pneumatic Spreader Stokers are listed and illus trated in this catalog. These units were first produced in 1949. UNDERGRATE FAN UNITS. These units were equipped with undergrate fan units and an air duct with volumeter. Refer to Table II, page 15, for usage of the items. Refer to figures 9, 10, 11, 12 and 13 and to Parts List III for identification of parts. GRATE PARTS. These stokers were equipped with either stationary-type grates or power-operated dump grates. Refer to figures 16, 17 and 18 and to Parts List I for identification of parts. Printed in U.S.A. THE WILL-BURT COMPANY ORRVILLE, OHIO, U.S.A. Form No. 3.986A File No. 7-401 Pag- 2 LIST OF CONTENTS PARTS LISTS Page Parts List I - Standard, Optional and Extra Equipment.............................................10 Parts List II - PS Gear Case Assembly..................................................................................15 Parts List--III - Undergrate Fan Units and Air Duct Parts..................................... 21 Parts List IV - Conveying Fan Assembly..................................................................................24 TABLES Table I - Stoker and Conveying Fan Drive Data........................................................... Table II - Undergrate Fan Data........................................................................................................ 20 9 LIST OF ILLUSTRATIONS Figure 1 - PS-401 Series Pneumatic SpreaderStoker ... 1 Figure 2 - Front View of Stoker............................................................................................... 3 Figure 3 - PS Gear Case Assembly.................................................................................................4&5 Figure 4 - Train View of Conveyor Fan Parts................................................................ 6 Figure 5 - Coal Drier Parts.............................................................................................................. 7 Figure 6 - Obstruction Guide and Cleanout Parts ......................................................... 7 Figure 7 - Conveyor Elbow Assemblies ............................................................................... 8 Figure 8 - Transfer Housing Cleanout Parts .................................................................. 8 Figure 9 - PG-4C Undergrate Fan Unit........................................................................................ 17 Figure 10 - PG-50, 51, 52 and 53 Single Undergrate Fan Units .... 18 Figure 11 - Duplex Undergrate Fan Unit........................................................................................... 18 Figure 12 - Internal Parts of Undergrate FanUnits ....................................................... 19 Figure 13 - Volumeter Air Duct Parts................................................................................................... 19 Figure 14 - PS-2413 Nozzle Assembly .......................................................................................... 25 Figure 15 - Coal Agitator Parts.......................................................................................................... 25 Figure 16 - Miscellaneous Parts .................................................................................................. 26 Figure 17 - Dump Grate Parts..................................................................................................................27 Figure 18 - Stationary Grate Parts .......................................................................................... 28 oiwr\ur\-TV I WUH LW I M ULMMrt I I V Ol l\UML/LI\ t HC MO. *tujl Page 3 CO h- r> z UJ Z CO oc .< CO n 4L>. >~ tu -- z ST CO C7> Ol <7 < o o X h* 3 O CVJ O OJ o CM CM -a 2 o o OJ S3- ss* o CVJ CO <A7t1 r- CD ST CvJ CVJ ru UJ O tu SC CO a> 1 11 CO CO CO Q_ in Q_ Q_ jg Z ST l0O> C0oM) 0----0 CWIM WCIM WCIM CL. Q- Q_ F ig u re 2 - F ro n t View o f S to k e r - R e fe r to P a rts L i s t (P g 1 0 )I CinM sr ST in ST in in ST rin ST CM CM CM CM 11 CO CO CO CO O- 0_ o_ Q_ OJ --(U (--O CM CM CM CO tillCM CM CM CM wwww Q_ Cu Q_ O- CD CO o ai -- OJ CM CD in CM in CO CM 1-- CO Q_ _ in oCO_ QCO_ CM o CCMO 1 CO CL. CO o CCOM aCO_ ST CoCOM CO Ol in CoO CM CO Q_ iD o CCOM CO Q_ CoO CM CO 0- CO UJ CO < o 0L). oD 03 L- (C0L o0c) aSC3O* -- ST IMPORTANT: Always specify stoker0 model number. Page 4 wi t>tKitb PNEUMATIC SPREADER STOKER Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 15) IX F ORTAS T: Always specify stoker model number. hu i otrvico mLuHMiiu orntAutit OJimtK 40091 40(09 me i\o. <-4Ui Figure 3 - PS Gear Case Assembly - Refer to Parts List II (Page 25) IMPORTANT: Always specify stoker model number. tile .'No. t-4U1 Pa*?e 6 UOl SERIES PNEUMATIC SPREADER STOKER IMPORTANT: Always specify stoker model number. A IF ig u re 4 - T r a in View o f C onveyor Fan P a r ts - R e fe r to P a rts L i s t (PG 1 0 ) (R e fe r to P a rts L is t IV (Pg 24) fo r P a rts In c lu d e d in Replacem ent Fan A ssem bly) PS-2053 ASH. PS-2070 PS-2011 PS-2073 PS-2075 401 SERIES PNEUMATIC SPREADER STOKER File No. 7-401 Page 7 PS-2064 PS-2065 PS-2137 INSULATION S-2300 GASKET PS-2418 \ 5I060 S-2415 Figure 5 - Coal Drier Parts - Refer to Parts List I (Pg 10) Figure 6 - Obstruction Guide and Cleanout Parts - Refer to Parts List I (Pg 10) IMPORTANT: Always specify stoker model number. File No. 7-401 Page 8 401 SERIES PNEUMATIC SPREADER STOKER * Figure 7 - Conveyor Elbow Assemblies - Refer to,Parts List I (Pg 10) IMPORTART: Always specify stoker model number. 00 < <o cCcJ z< CD >UJ- zo>o o z<t o3Z CO z 2 2 u_ PS -7 5 -1 1 0 -1 6 0 P S -200 PS-3 0 0 PS -4 0 0 X 2 CL s cc < in CM > < Ilf X o o (J . t- h- oO 22 2< T o t-- X) _J o cc 2 UJ in o CD o _____________ CO co in \ hCM ID CM O in CL o Cl CD odo ,z .z .z L. o o O fUJ > < UJ III > X< in \i3 X ofr in Hzz O<< 2 li_ L_ b_ Q o li. os -- f-- () : nr in 7* a _} o UJ CD UJ _j z CD << U- U AT.* /Uways specify stoker model number, NO. 1 STANDARD NO. 2 O PTIO N AL U SIN G 2 0 0 -PS FAN D R IV E NO. 3 O PTIO NAL U SIN G 300-P S FAN D R IV E NO. 4 O PTIO N AL U SING 400-P S FAN D R IV E NO. 2 STANDARD N O .3 O PTIO N AL U SIN G 3 0 0 -P S FAN D R IV E NO. 4 O PTIO N AL U S IN G 4 0 0 -PS FAN D R IV E NO. 3 NO. 4 O PTIO N AL STANDARD OVER SPEED FAN D R IV E N O .3 NO. 4 STANDARD O P T 10 N A L OVER SPEED FAN D R IVE CM in in CM l/> a. CO in in in < CM in CL in | P S -2454 | 1 P S - 2 4 4 9 |1 P S -2451 1 P S - 2 4 5 2 |i 1 P S -2 4 5 5 1 CO CM \\ r* - in CL CM ID CM 1 P S -2189 | 1 9 -7 /8 | | P S -2215 | P S -2221 in CM CM ID in CL o CM \ CM in ID CL 1 P S .2456 1 1 3 -1 /4 1 PS - 2 2 2 0 1 PS - 2361 1 B -97 | B -9 3 CL in CD 1 || 1 0 -7 /8 | P S -2215 11 P S - 2 2 2 1 1 ID O at tn CM co r-. <D 7 -1 /2 1 PS-2456 !| 1 3 - 1 / 4 | P S -2104 I L -6 -1 /2 ., 1 P S -2220 | P S .2361 in CM CO ID in 0. | |1 |1 | in in \F> CO rr \ in CM in a. CL CL in `D in co O) CM CO S. CM in CM W CL CM \ in in in CO \ in CM CM V) in CL CL CM in 7 -1 /2 P S -2 4 5 0 | P S .2455 |1 PS - 2 4 5 1 CO 1 ______ l P S -2 4 5 7 1 P S .2450 1 -1 /4 ________ 1z / i - CL PS - 2456 1 3 -1 /4 | | ID c in V in T CL CO <0 M- CM ID in O CO CO \ CM CL CL in CM CO ID in CL M- o O CO CM | P S -2361 | CM CM o P S -2361 in in ID in CO an 03 \ CM ro CD CM co 03 CM CD co Oi i CM CD CM CM CM ID CD CO CM hs in < CM CM CM - >- 1- '> 2 CL - a: UJ > < UJ QX UJ in UJ CL cc in UJ X zo < hu. in o <4 Ll o z UJ QN O li_ in o X <1" o z X z X z jj h- UJ u_ UJ 2 b. UJ Ll. on 1-- X UJ j h- r* X cr H - UJ s 54 O o U IJ o UJ X < 2 ce UJ 54 o in in < o o: < UJ u> eg 9C 1 2940 | 3250 1 3660 50041 1 4000 I CM \ CD (D II P S - 2 1 5 0 | o ID j|(P S -2272-*P S -75) (P S -2 2 7 3 -P S -110) (P S -2 2 7 4 -P S -160)| || 5 0 0 3 4 | ( 7 .6 - P S - 7 5 ) (11 . 1 -P S -1 1 0 )(1 6 .3 -P S - 160) I o- CT> CM in CL CO CM PS-211 8 || (3 .0 - PS - 7 5 ) ( 4 . 4 -P S -1 1 0 ) ( 6 .4 - P S - 1 6 0 ) | CM CO O in in Q_ (L CL o co O ID 50041 | 4000 o in CM m O r- \ ID in ID CM m CM CM in in CooO - at O CM 20^ ? P S -2118 CO CM o oo T o ID ID CO 1 I 3660 1 4000 \ o in ID oo in ____________ _________________ 1 | P S .21 50 | 1 P S .2276 1 P S .2240 1 | ID CD P S -2150 P S -2276 P S -2025 CM o o oID ID CD CM o CM CM ll P S -2 0 9 1 | ______P_S_-_2_0_6_9 12.0 o ID | . | co CM P S -2091 P S -2092 62 1 6 .0 X in UJ -- a in z UJ > -- cc o L< Z CC -- X o u " ou 2 2 cl oX & <c Page 9 i*lie iNo. i -4U1 Page 10 401 SERIES PNEUMATIC SPREADER STOKER -A PARTS LIST I INCLUDES ALL STANDARD, OPTIONAL AND EXTRA PARTS FOR 401 SERIES PNEUMATIC SPREADER STOKERS. REFER TO PARTS LIST II FOR COMPONENT PARTS OF GEAR CASE ASSEMBLY NUMBERS SHOWN ON THIS LIST. REFER TO PARTS LIST Ml FOR COMPONENT PARTS OF UNDERGRATE FAN UNITS AND AIR DUCT ASSEMBLIES. REFER TO PARTS LIST I V FOR COMPONENT PARTS INCLUDED WITH REPLACEMENT CON VEYING FAN ASSEMBLY. REFER TO TABLE I FOR PARTS USED ON STANDARD AND OPTIONAL CONVEYING FAN AND STOKER DRIVE ARRANGEMENTS. FIG. NO. 94 12 PART NUMBER PG-4C 10,11412 PG-50 10,11412 PG-51 10412 PG-52 I0&I2 PG-53 8 PS-33 13 PS-379VR 13 PS-381VR 16 PS-468 16 PS-469 16 PS-487 16 PS-488 7 PS-53 IR 7 PS-533R 17 17418 18 17 17 PS-800 PS-801 PS-802 PS-803 PS-805 PART NAME QUAN. REQ'D Undergrate Fan Unit.............................................................. ...... ................................. Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit....................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit.............................................................. ........................................ Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit....................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Undergrate Fan Unit....................................................................................................... Refer to Table II for usage. Refer to Parts List III for component parts. Hinge Eyebolt..................................................................................................................... Air Duct and Volumeter Assembly. .... ................................... Used with PG-4C Undergrate Fan Unit. Refer to Parts List III for component parts. Air Duct and Volumeter Assembly. .................................................................... Used with PG-50, 51, 52 and 53 Undergrate Fan Units. Refer to Parts List III for component parts. Standard Pin Hole Grate Bar - 8 x 24 In.. . .................................. Standard Pin Hole Grate Bar - 8 x 36 In.................................................. ...... Grate Support I-Beam for Standard Pin Hole Grates.................................. (Specify number of notches and length required.) Grate Support Channel for Standard Pin Hole Grates ........................... (Specify number of notches and length required.) Elbow Asm............................................................................................................................. Consists of: 2 - PS-36 Handwheel Eyebolt 1 - PS-531 Elbow 1 - PS-532 Elbow Cover 2 -- PS-560 Handwheel Elbow Asm............................................................................................................................. Cons i sts of: 2 - PS-36 Handwheel Eyebolt 1 - PS-533 Elbow 1 - PS-534 Elbow Cover 2 - PS-560 Handwheel Dump Grate........................................................................................................................... Front Grate ..... ......................................... ...... Cleanout Door Assembly......................................................................................... Bearing Grate....................................................... ...... Side Grate Sleeve.................................................................................. ...... As Required As Required As Required As Required As Required 2 As Required As Required As Required As Required As Required As Required As Required As Required < As Required As Required As Required As Required As Required IMPORTANT: Always specify stoker model number. 4(J I btKItb MNtUMA I I C SHKtADtR STOKER FIG. NO. 17 17418 17 17 17 18 16 PART NUMBER PS-806 PS-807 PS-808 PS-809 PS-810 PS-819 PS-822 16 PS-849 18 PS-859 18 PS-86J} 18 PS-943 18 PS- 1007 17 PS-10 10 17 PS-10 13 13 PS-I0I8VI 13 PS-1020 17 8 8 8 8 8 8 8 8 2,548 8 8 8 8 8 8 2 5 5 5 5 PS-1057 PS-2000 PS-2001 PS-2002 PS-2003 PS-2004 PS-2005 PS-2008 PS-2009 PS-2011 PS-2012 PS-20 15 PS-2018 PS-2020 PS-2021 PS-2022 PS-2024 PS-2026 PS-2036 PS-2045 PS-2048 PS-2053 PS-2064 PS-2065 PS-2069 PS-2070 PS-2073 PART NAME Side Grate Pin ............................................................................ Rear Grate.......................................................................................... Side Grate - L.H............................................................................ Side Grate - R.N............................................................................ Grate Bar Bearing ..................................................................... Ash Well Grate............................................................................ Hot Gas Outlet Assembly ....................................................... Co ns i st s of: I - PS-823 Hot Gas Outlet I - PS-824 Air Shutter Grate Support Assembly for Standard Pin Hole Grates (Specify number of notches and length required.) Stationary Grate - 36 In................................................... Stationary Grate - 24 In........................ Side Plate.......................................................................................... Grate Leg Assembly . ................................................. Dump Lever. . ...................................................................... Pin........................................................................................................ Air Duct and Volumeter Assembly - 24 In. Long . Used with PG-4C Undergrate Fan Unit. Refer to Parts List ill for component parts. Air Duct and Volumeter Assembly - 24 In. Long . Used with PG-50, 5 1, 52 and 53 Undergrate Fan Units. Refer to Parts List III for component parts. Seal Bar.............................. ........................................................... Transfer Housing........................................................................... Transfer Cleanout Upper Cover ..................................... Transfer Cleanout Lower Cover ...... Transfer Housing Bottom Plate ..................................... Hand Latch......................................................................................... Upper Hinge Bar........................................................................... Shoulder Screw ........................................................................... Lower Hinge Bar ........................................................................... Knob........................................................................................................ Shutoff Gate . . .................................................................... Gate Guide - L.H............................................................ . . Gate Guide - R.H........................................................................... Shutoff Gate - Stuffing Box ............................................. Packing Nut Gland ................................................................... Shield Plate Assembly ... ...................................... Coal Worm Bearing Housing.................................................... Drier Inlet Housing.............................. ....... . . . . Drier Enclosure Assembly ............................................. Drier Sheet Assembly ............................................................ Drier Cleanout Cover Assembly ..................................... Consists of: V-690 Handle PS-2050 Cleanout Plate PS-2052 Insulation - 3/8 In. PS-2235 Insulation - 1/4 In. PS-2236 Gasket PS-2237 Retainer Plate Access Plate Assembly ............................................................ Consists of: I - PS-2054 Access Plate 1 - PS-2056 Access Plate Shield 2 - PS-2079 Insul ation 1 - V-690 Handle Upper Damper Guide ............................................................ Damper Blade .................................................................................. Chain ................................................................................................. (Used on PS-300 only.) Damper Adjusting Wheel Bracket ..................................... Drier Inlet Top Insulation ............................................. IHPORTANT: Always specify stoker model number. - "Vile No. 7-4UI Page 11 QUAN. REQ'O As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required As Required File No. 7-401 Page 12 c o o o r o r v 5 4 = r o f o r o r o r o t j i 4 = 4 = - P 4 = 4 = 4 = 4 = r o 4= 4= 4= r o - f = - p - f = - f = 4 = - ^ = - c = f o r o f*o r o to -- tn on * tn^ FIG. NO. 4 4 PART NUMBER PS-2074 PS-2075 PS-2076 PS-2077 PS-2078 PS-2080 PS-2081 PS-2084 PS-2087 PS-2091 PS-2092 PS-2093 PS-2094 PS-2095 PS-2097 PS-2098 PS-20 99 PS-2100 PS-2102 PS-2103 PS-2104 PS-2111 PS-2114 PS-2116 PS-2117 PS-2118 PS-2119 PS-2123 PS-2124 PS-2125 PS-2127 PS-2131 PS-2132 PS-2137 PS-2138 PS-2139 PS-2142 PS-2147 PS-2150 PS-2160 PS-2171 PS-2172 PS-2173 PS-2174 PS-2175 PS-2176 16 PS-2177 2 PS-2210 2 PS-2213 2 PS-2214 2 PS-2215 2 PS-2219 401 SERIES PNEUMATIC SPREADER STOKER * PART NAME (JUAN. REQ'D Drier Inlet Insulation ............................................................................................................... Drier Inlet Wrapper Sheet ..................................... . .................................................... Drier Insulation .............................................................................................................................. 9" x 26" x 1-1/4" Lower Side Drier Insulation................................................................................. Drier Insulation....................................................................................................... 3-1/4" x 26" x 1-1/4" Drier Insulation Wrapper Sheet................................................................................................ Drier Ccal Worm.................................................... ................................................................................ Bin End Coal Worm............................................................................................................................. Motor Sheave Assembly (Obsolete - replace with PS-2455) .............................. Sprocket .................................................................................................................................................... Drive Chain ............................................................................................................................................ (Used on PS-400 only.) Seal Gasket ............................................................................................................................................ Thrust Bearing ..................................................................................................................................... Fan Bearing Housing (Used With PS-2411 Fan Shaft Assembly) . Seal Ring................................................................................................................................................... Fan Shaft Bearing Oiler ............................................................................................................... Fan Bearing Housing Vent............................................................................................................... Water-Cooled Bearing Retainer .............. Fan Support Studs ................................................................................................ . Fan Spacer........................................................................................................................................... Fan Sheave ............................................................................................................................................ (6- 1/2 in. O. D. ) Fan Inlet Cover Plate...................................................................................................................... First Stage Fan Liner (Also Order ( I) PS-2485 All) PS-2484 Fan Housing Seal I . Interstage Fan .................................................................................................................................... Second Stage Fan Liner (Also Order ( I) PS-2485 Fan Housing Seal) Drive Chain ............................................................................................................................................ (Used on PS-75, 110, 160 and 200.) Conveyor Fan Housing............................................ ........................................... ....... Back Plate Insulation - 3/8 In. Thick ..... ..................................... Back Plate Insulation - 1/4 In. Thick.......................................................................... Insulation Cover Sheet .............................................................................................................. Air Duct................................................................................................................................................... Air Duct Gasket.................................................................................................................................... Wrapper Sheet .................................................................................................................................... Drier Insulation - Fan Side....................................................................................................... Motor Shaft Key - 2 In. Long ................................................................................................ Motor Sheave Key - I In. Long ................................................................................................ Motor Plate ........................................................................................................................................... Gear Case Support ............................................................................................................................. Gear Case Drive Belt..................................................................................................................... Fan Bearing Housing Support....................................................................................................... Bearing Housing Gasket .............................................................................................................. Worm Housing Gasket ..................................................................................................................... Bottom Plate Gasket ................................................................................................................. Stuffing Box Gasket..................................................................................................................... Air Duct Clamp Gasket..................................................................................................................... Balancing Hub Assembly .............................................................................................................. IncIudes: 3 - PS-2362 Balancing Weight Coal Worm Sprocket Spanner ....................................................................................................... Fan Drive Beit .................................................................................................................................... Used on Model PS-75Motor Plate Hinge ............................................................................................................................ Fan Sheave ........................................................................................................................................... Used on Models PS-I 10 and PS-160. Fan Sheave ........................................................................................................................................... Fan Sheave ........................................................................................................................................... Used on Model PS-75. * Wot i llustrated . " Refer to Table I for usage. CO CO 6 1 2 1 2 I I I 1 2 2 ** IMPORTANT: Always specify stoker model number. FIG. NO. 2 2 2 2 4 2 2 2 1 4 2 2 5 2 8 2 5 2 2 2 2 2 2 4 4 -- 2 2 2 15 4 4 14 5 5 6 4 15 401 SERIES PNEUMATIC SPREADER STOKER "File No. 7-401 Page 13 PART NUMBER PART NAME QUAN. REQ'D PS-2220 PS-2221 PS-2222 PS-2224 PS-2226 PS-2228 PS-2234 PS-2241 PS-2246 PS-2254 PS-2257 PS-2266 PS-2291 PS-2295. PS-2298 PS-2299 PS-2300 PS-2302 PS-2303 PS-2304 PS-2305 PS-2306 PS-2307 PS-2350 PS-2353 PS-2357 PS-2359 PS-2361 PS-2365 PS-2379 PS-24 10 PS-2411 PS-2413 PS-2415 PS-2418 PS-24 27 PS-2430 PS-2431 Fan Drive Belt . Fan Drive Belt . Motor Sheave Assembly Motor Sheave Assembly Air Duct Clamp . (Obsolete - replace with PS-2455) .............................. (Obsolete - replace with PS-2454) ..... Coal Worm Housing Bearing . ......................................................................................... Motor Plate Hinge . Sheave Housing Support Belt Guard . Belt Guard Support Clip ......... .................................. Oil Drain Pan . . Chain Guard . . . Drier Inlet Gasket. . . Belt Guard Bracket. Overflow Tube Cooling Tube Assembly. Access Cover Gasket . Gear Case Assembly. Gear Case Assembly. Used on Model PS-110. I See figure 3 and Parts List 11 for component parts. ) Gear Case Assembly. Used on Model PS-160. (See figure 3 and Parts List II for component parts. I Gear Case Assembly. Used on Model PS-200. (See figure 3 and Parts List II for component parts. ) Gear Case Assembly. Used on Model PS-300. (See figure 3 and Parts List II for component parts. ) Gear Case Assembly. Used on Model PS-400. (See figure 3 and Parts List II for component parts. ) Seal Plate . . . Dust Check Ring. Cooling Tube Clamp. Motor Plate Hinge Screw...................................................................................................... Fan Drive Belt . Motor Sheave Assembly (Obsolete - replace with PS-2457) ..... Coal Agitator Assembly Consists of: 1 - PS-2380 Agitator Bracket 1 - PS-2385 Clamp Plate 1 - PS-2386 AgitatorWheel - R. H. 2 - PS-239 1 Retainer Ring 2 - V-5252 Agitator Wheel Arm 2 - 17023 Agitator Bearing 1 - PS-2387 Agitator Wheel - L. H. 2 - PS-2390 Shaft 4 - 170 27 Thrust Bearing 4 - 17028 Bearing Retaining Ring . Fan Shaft Assembly (Used With PS-2095 Fan Bearing Housing! Consists of: 2 - PS-1123 Fan Shaft Bearing 2 - PS-2460 Oiler Guide N.D. #87507 1 - PS-2105 Fan Shaft 1 - 38298 Spacer 4 - 41020 Retainer Ring Nozzle Assembly. .... Consists of: 1 - PS-44 Nozzle Hinge Pin 1 - PS-45 Nozzle Control Rod 1 - PS-47 Nozzle Handwheel 1 - PS-81 Nozzle Body 1 - PS-308A Support Assembly 2 - PS-309 Sleeve Cover Plate 2- PS-311 Support U Bolt 1 - PS-2180 Nozzle End 1 - PS-2181 l-in. Deflector 1 - PS-2182 l-l/2-in. Deflector 1 - PS-2183 2-1/2-In. Deflector Baffle - R.H. . . . Baffle - L.H. . . . Obstruction Guide Housing ............................................................. ..... Fan Housing Seal Coal Agitator Shaft . * Refer to Table I for usage. *2* 1* r i i i i i 2 1 1 1 1 1 1 1 1 1 1 1 i 1 2 1 1 2 2* 1* 1 1 1 1 1 1 1 1 2 IMPORTANT: Always specify stoker model number. File No. 7-401 Page 14 401 SERIES PNEUMATIC SPREADER STOKER * FIG. NO. PART NUMBER PART NAME QUAN. REQ'D 15 15 4 4 2 2 2 2 4 4 4 4 4 4 4 4 16 16 16 17 16 16 16 16 16 16 17 244 4 6 6 6 6 8 2 2 2 5 5 6 6 6 6 6 1 1 2 2 2 2 2 4-2 PS-2432 PS-2433 PS-2434 PS-2440 PS-2452 PS-2454 PS-2455 PS-2457 PS-2459 PS-2461 PS-2462 PS-2463 PS-2465 PS-2468 PS-2484 PS-2485 S-I009R S-IOI IR S-10 12 S- 1049 S- 1050 S-I050R S- I057R S- 1058R S- I059R S- 1098 S- 1099 40048 40125 41039 41040 41041 41042 41043 41 344 41350 41526 51060 51061 51062 51064 51065 51066 51067 51070 51071 51102 51 1 13 51 114 51 1 18 80348 80689 Thrust Bearing ........................................................................................................................... 4 Bearing............................................................................................................. ...... Fan Wheel......................................................................................................................................... Sliding Nipple Assembly ....................................................................................................... Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly...................................................................................................... . Motor Sheave Assembly............................................................................................................. Motor Sheave Assembly.................................. .......................................................................... 4 2 1 *| *| *| *( Conveying Fan Assembly ....................................................................................................... Refer to Parts List IV for Component Parts 1 Balance Ring.................................................................................................................................. 2 Fan Bearing Housing (Used with PS-2468 Fan Shaft Asm.), ..... "Gasket................................................................................................................................................ 1 1 1 Fan Shaft Assembly (Used With PS-2463 Fan Bearing Housing) .... 1 Cons i sts of: 4 - 40120 Retainer Ring 1 - 38298 Spacer 1 - PS-2105 Fan Shaft 1 - PS-2466 Bearing - N.D. #97507 2 - PS-2460 Oiler Guide 1 - PS-2467 Bearing - N.D. #97607 Fan Housing Seal - (Used With New Style PS-2114 First Stage Liner Sheet) 1 Fan Housing Seal - (Used With New Style First and Second Stage Liner) 2 Ash Hoe and Handle - l-in. Pipe........................... ...... ......................................... Used with pin-hole type grates. 1 Clinker Rake and Handle - l-in. Pipe........................................................................... Refractory Tile Slab - 3" x 6" x 18".............................................................. . Used over nozzle opening in front wall. 1 1 Air Cylinder Assembly for Dump Grates......................................... ...... As Required Ash Hoe ........................................................................................................................................ Ash Hoe and Handle - l-in. Pipe ....... .................................. Used with ribbed-type grates. 1 1 Clinker Hook and Handle - 3/4-in. Pipe .................................................................... Slice Bar and Handle - l-in. Pipe................................................................................. Slice Bar and Handle - 1-1/2-in. Pipe .................................. ...... Hot Gas Temperature Indicator - 12-in........................................................... ...... . 1 1 1 1 Steam Cylinder Assembly for Dump Grates...................................................... As Required Retainer Ring .......................................................................................................................... Toggle Handle .......................................................................................................................... 3 2 1 Toggle Link ................................................................................................................................. Lock Pin ........................................................................................................................................ Lock Pin . .......................................................................................................................... 1 1 1 Motor Adjusting Bolt ............................................................................................................. Cable Spring................................................................................................................................. Quadrant Cable Assembly ...................................................................................................... Sheave and Housing Assembly. . ............................................... ................................. Consists of: 1 - 41231 Sheave Housing 2 1 1 1 1 -- 40076 Spacer 1 -- 41232 Sheave Housing Cover 2 - 40078 Washer 1 - 41527 Cable Sheave Worm Coup!ing Nut ................................................................................................................... Worm Coupling PIug................................................................................................................... Worm Cleanout Housing............................................................................................................. Cleanout Stud .......................................................................................................................... Worm Cleanout Housing Cover............................................................................................... Worm Cleanout Housing Gasket ........................................................................................ Bin Plate....................................................................................................................................... Bin Channel........................... ...... ........................................................................................ Bin Worm Bearing ................................................................................................................... Lock Nut........................... ...... ..................................................................................................... Lock Washer...................................................... ................................. ...... ................................. Motor Adjusting Bracket ..................................................................................................... Flare Nut (Not Illustrated).................................. ...... ..................................................... Brass El bow................................................................................................................................. ' Refer to Table I for usage 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 IMPORTANT: Always specify stoker model number. HOI SERIES PNEUMATIC SPREADER STOKER FIG. NO. 3 3 3 3 3 3 3 3 3 3* 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 '3 -3 3 3 3 3 3 3 3 3 3 3 3 3 * 3 3 3 3 PARTS LIST II COMPONENT PARTS OF PS GEAR CASE ASSEMBLIES PART NUMBER PART NAME A--I 16 PS-2025 PS-2184 PS-2240 PS-2271 PS-2272 PS-2273 PS-2274 ,, PS-2275 PS-2276 PS-2292 40029 40030 40031 40036 40048 40061 40062 40063 40064 40066 40069 40073 40074 40075 40076 40078 40085 40086 40091 40093 40094 40100 40101 40106 40109 40110 40111 40112 40116 40124 40125 40126 40129 40136 40152 40153 40154 40155 40163 40168 40173 40176 40 181 40182 50009 50010 Ball Bearing (N.D.-7505). Drive Sprocket - 21 Teeth . Used on Model PS-400 only. Quadrant ........................................................ Drive Sprocket - 16 Teeth . . . Used on Model PS-300 only. Cam............................................................... Cam............................................................... Cam....................................................................... Cam. . . ................................................. Cam....................................................................... Cam....................................................................... Cam Adjusting Washer ............................. Collector Plate.......................................... Finger Spring ....... Shoulder Screw . . ............................ Bearing Stop Cover Shim . Spring Key .................................................. Cam Follower. . . ............................ Cam Roller.......................................... . Cam Roller Stud. ...... Spring. ......... Coal Feed Quadrant Arm .... Air Adjustment Quadrant Arm. Air Adjustment Sheave. .... Eccentric Bushing ...... Air Adjustment Pivot Screw . Air Adjustment Spacer. .... Air Adjustment Washer............................. Plug.............................................................. Plug .............................................................. Overload Release Pin . Ball Bearing (N.D. 7507). . . . Ball Bearing (N.D. 55507) . Ball Bearing (N.D. 7506). . . . Ball Bearing (N.D. 88035) . . . Oil Seal (Nat. 140328) .... Oil Seal (Vital ic 6318) . . . . Bearing (Oilite A-956) .... Bearing (Oilite T-I303-I) . . . Bear Ing (Oil ite)................................... Bearing (Oil ite A-1167-2) . . . Retainer Ring (Eaton International) Retainer Ring (Eaton International) Retainer Ring (Waldes Truarc) . Knob ............................................................... Low Speed Shaft Key ............................. Washer (ABEC-W-07)................................... Lock Nut (ABEC-N-07)............................ Acorn Nut - Upper ................................... Acorn Nut - Lower ...... Oil Gauge........................................................ Key...................................................................... Chain Retainer Pulley............................. Name Plate................................................. Quadrant Arm Stop................................... Retainer Screw ....... Gear Case. ........ Gear Case Cover......................................... * Not i LLustrated. IMPORTANT: Always specify stoker model number. File No. 7-401 Page 15 QUAN. REQ'D As Required 3 As Required 3 1 2 2 4 3 1 2 2 1 2 I 1 1 3 3 2 File No. 7-401 Page 16 FIG. NO. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 PART NUMBER 600 12 500 13 600 14 50015 500 16 50017 50018 50019 50020 50023 50024 50025 50026 50028 50029 50030 50031 50033 50034 50035 50036 50037 50038 50039 50040 50041 50042 50043 50044 50045 50046 50047 50050 3 50057 3 50058 3 50059 3 50060 3 50061 3 50062 3 50063 3 50064 3 50065 3 50066 3 50067 3 50068 3 50069 3 50070 3 50071 3 50072 3 50073 3 50075 3 50077 3 50085 3 50089 3 50093 3 50 1 15 3 50118 3 50120 3 50121 3 50122 3 50123 3 50124 401 SERIES PNEUMATIC SPREADER STOKER PART NAME Main Worm Shaft............................................................................................................................ Main Worm Gear .............................................................. .............................................................. Differential Worm Shaft ........................................................................................................ Differential Worm Gear ....................................................................................................... Low Speed Shaft............................................................................................................................ Spacer........................................................................................................................................... Internal Gear ............................................................................................................................ Sun Pinion Gear............................................................................................................................ Spider Assembly............................................................................................................................ Planet Gear................................................................................................................................... Inner Spider................................................................................................................................... Thrust Washer ............................................................................................................................ Thrust Washer ............................................................................................................................ Back Gear Hub ; ................................................................................... Spring................................................................................................ ................................................ Drive Shaft Key.............................................................. ...... ...................................................... Drive Shaft................................................................................................................................... Drive Shaft Shim ..................................................................................................................... Drive Sprocket - 11 Teeth ................................................................................................ Used on PS-50, 75, 110, 160 and 200. Shear Pin................................................................................... ...... ................................................ Shear Pin Retainer..................................................................................................................... Main Worm Bearing Retainer ................................................................................................ Differential Worm Bearing Retainer ............................................................................ Main Worm Bearing Retainer Gasket................................................ .................................. Differential Worm Bearing Retainer Gasket .............................................................. Input Sheave................................................................................................................................... Si iding Sheave .............................................................. ............................................................. Adjusting Sheave ..................................................................................................................... Bearing Housing. ..................................................................................................................... Sheave Drive Pin.............................................................. ...... ................................................ Bushing .......................................................................................................................................... Belt Shifter Support ....................................................................................................... , Belt Shifter Assembly. ... ................................................................................... Consists of: 1 - 50097 Belt Shifter - Front Half 1 - 50098 Belt Shifter - Rear Half Spring Washer ................................................................................................ .... Spring Washer............................................................................................................................ Oil Seal Housing......................................... ........................................................................... Snap Ring......................................................................................................................................... Ball Bearing (N.D. 7607)........................................................................... Bail Bearing (N.D. 550 7)....................................................................................................... Ball Bearing (N.D. 993L09) ................................................................................................ Needle Bearing (Tor. B-I2I0X) ......................................................................................... Needle Bearing (Tor. B-24I4X0H).................................................................................. Bearing (Oilite A-I2I3-2)................................................................................................ Bearing (Oilite A-1623)....................................................................................................... Oil Seal (Nat. 50135).............................................................................................................. Oil Seal (Nat. 50 4 52).............................................................................................................. Oil Seal (Nat. 500S5-S)....................................................................................................... Retainer Ring (Wal. NAS 51-175) ................................................................................... Retainer Ring (Wal . No. 51-325).................................................................................. Retainer Ring (Wal. NAS 51-118) ..................................................................... ...... Retainer Ring (Wal. NAS 50-300).................................................................................. Wide V Belt.................................................................................................................................. Lock Washer .................................................................................................................................. Oil Distributor......................................... ...... ........................................................................... Oil Distributor Chain. . . ......................................................................................... Dowel Pin .................... Gear . . .................................................................................................................................. Oil Elevating Pulley.............................................................................................................. Chain Retainer Pulley Screw.................................. ............................................................. Cover Bearing Stop.................................................................................................................... Case Bearing Stop................................................ ...... ............................................................. Worm Wheel Shim ...... ........................................................................... QUAH. REQ'D 1 1 1 1 1 1 1 1 1 3 1 1 1 1 3 1 1 As Required 1 As Required 1 1 1 1 1 1 2 1 2 4 4 1 1 1 1 1 1 1 1 2 6 2 2 1 1 1 1 2 1 1 2 1 1 1 1 2 1 1 1 1 1 As Required IMPORTANT: Always specify stoker model number. FIG. NO. 3 3 3 3 PART NUMBER 50125 50126 50129 50139 UOI SERIES PNEUMATIC SPREADER STOKER PART NAME Worm Wheel Shim. .... Pointer ....... Internal Gear Bearing Retainer. Overload Switch Assembly. Consl sts of: I -40079 Box I -40080 Actuator Lever I -40083 Spring I -40084 Spring I -40115 Beari ng I -40 130 Nut I -40134 Insulation I - 50 I 16 Reset Lever I - 50117 Reset Spacer I - 50 138 Conduit 1 - 50230 Switch Asm. 2 - 80263 Anti-Short Bushing I - 8 1472 90 Connector -* file l\o. (-4U1 Page 17 (JUAN. REQ'D As Required 2 I Figure 9 - PG-4C Undergrate Fan Unit - Refer to Parts List III (Pg 2i) !!l: Page 18 i i j -- W1.M 1-w i tiuwi ini l W gi IlknULK \J IVIlUh V-0222 V-0233 V-0225 5IM67 5IU66 Figure 10 - FG-50, 51, 52 and 53 Single Undergrate Fan Units - Refer to Parts List III (Pg 21) M Figure 11 - Duplex Fan Unit - Refer to Parts List III (Pg 21) IMPORTANT: Always specify stoker model number. PS-ie7 PS-1121 Page 19 Figure 12 - Internal Parts of Undergrate Fan Units - Refer to Parts List III (Pg 21) Figure 13 - Volumeter Air Duct Parts - Refer to Parts List III (Pg 21) IHPORTART: Always specify stoker model number I Fage 20 }. !j il :i fi i i \ i u> X -J uI2 t(-ft IfWrt s> E E x in o ? <L E o in X Ju,g S uJ 5&| VTt X E X y <M o r N *1 E O aa u_/i * u sc ?o in o EX & o o <v " > > a u E ~J o ze- u tn in <v if) a. EX n o a S* > & oo E ,_Q <5ujUUl itnn" X w |bg XO O(O g E r> O o n s. > " n - (V to n t0o tn .V r CO - E - 0 CP - n o tn o N o - E - o0 to 1 V - o :- n>< o ffl - E - Col <0~ r* \ r to - E - 0~ s>* 9 to - PI E - 2QE<z uO>u_il 1/) oto CinM a X X <n o r \ O o > 2(o<X U-yJl S JS tn cm in a X o? in s 2 - " oo o X n o a - <V E - r - CD s o ffl - E - 12O can. sd'3 in g ft J* X COL Oto ^g EX o ro s */ 1 E u-Ji ss >(</-> to m E EX o ! rJ ID lO > OB< UU_1l ss 2tn m a X <5 oti S - 2 0O vx> igs; o tOotoyg E E X w or- nJl % E 2E u-Ji sy zu tn o*o Oin a X o o * L '0 E - tE<z<- Ua>aJl in <v o X EX s Q ~- E J ul g f aV.) |B| o X g EX O r\! - 7 E EO <a tzt<n-. U_Jl O> o too o E E o tf it n E - - so 3 o rj r- m - E - oo<* - o o CO - - o E - cS o - a - E - a - M o - <s - E - oo 0 - O <n D - e> <v roo* - - - <n E r<0 E o 1- <*> " - III - - = oo r- E E - <tl O *) a - E - z g c s 2UJ in u a< tEUoJ Z > tmnl 2 Si<ni U wa X Ul *- au<. uX< 6Z ~ u O O Z w > oE 10 U><l ui * z o O Z >OoE 10 uXo Q o uo<E&.* oz> u >K A z<DO o z uO o Z I>ooU tEo O o 2 E * du EoUSCl V) < o u" uX>l _ X _J z z< am<>l E-- >i- O> Z-a '^"v <wUl EX 3 sl w> tn a Uz<. <hi X z< Sg < o IMPORTANT, Always specify stoker model number * FIG. NO. 12 12 12 10 9& 10 * 12 12 12 9 * 9 10 13 13 .2 9 9 hu i oc.nic.0 rhoumaiiu orncrtucn oiuinuv -rjtie ixj. (-4-ui Page 21 PARTS LIST III COMPONENT PARTS OF UNDERGRATE FAN UN ITS AND VOLUMETER AIR DUCT ASSEMBLIES. SEE TABLE II FOR USAGE AND DATA REGARDING UNDERGRATE FANS. PART NUMBER A-86 C-80R C-86 PF-0020 PF-0022 PF-0023 PF-0025 PF-0206 PF-0219 PF-0235 PS-120 PS-I2IR PS-I22R PS-13 I PS-158 PS-187 PS-257 PS-325 PS-368 PS-372 PS-379VR PS-381VR PS-390 PS-395 PS-396 PART NAME Felt Washer Drive End Fan Wheel Assembly . Consists of: . I - C-80 Fan Hub I - V-56II Fan Wheel Spacer I - V-56I3A Fan Wheel - 4 x 14-1/2 in. I - V-56I4A Fan Wheel - 7 x 14-1/2 in. Felt Washer Drive End .............................. 1/2-14 x 1-3/4 .In. Hippie . . . . 1/2-14x3 In. Nipple.............................. 1/2-14x4 In. Nipple . . I-14 x 15-3/4 Pipe ..................................... 90 Ell................................................................... Cable Pipe ............................................................ Bushing - l/4-in. x l/2-in. Fan Shaft............................................................ Fan Wheel - R.H.................................................. 7 in. x 14-1/2 in. Fan Wheel - L.H................................................. 7 in. x 14-1/2 in. Fan Shaft Bearing............................................. Lower Tie Strap ............................................. Fan Sheave .... .............................. Motor Spacing Bar............................................. Belt Guard Spacer............................................. Motor Plate........................................................... Belt Guard ............................................................ Air Duct and Volumeter Assembly . Consists of: - PS-379 Ai r Duct - PS-389 Volumeter Air Tube - PS-736 Volumeter Diaphragm - V-2318 Regulator Rod Quadrant - V--5 I35A Regulator Panel - V-5317 Volumeter Lower Housing - V-5823 Regulator Damper Rod - V-5835A Volumeter Upper Housing - V-6524 Diaphragm Piston Rod - V-6526 Piston Rod Yoke - V-65 27 Yoke Pin - V--6535 Regulator Blade Ai r Duct and Volumeter Assembly . Consists of: - PS-252 Regulator Damper Rod - PS-255 Volumeter Air Tube - PS-381 Air Duct - PS-734 Regulator Blade - PS-736 Volumeter Diaphragm - V-2318 Regulator Rod Quadrant - V-5I85A Regulator Panel - V-5317 Lower Volumeter Housing - V-5835A Upper Volumeter Housing - V--6524 Diaphragm Piston Rod - V-6526 Piston Rod Yoke - V-6527 Yoke Pin Fan nlet Ring.................................................... Fan Wheel ........................................................... Fan Housing, ........ QUAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 1 2222 1 2 1 122 2 1 1 1 22 | 2 2 44 1 1 1 22 1 1 22 I 1 22 1 1 22 1 1 22 1 2244 22 2 2 1 11 1 1 1 22 22244 1 1 ' Sot illustrated. IHP0RTAST: Always specify stoker model number File No. 7-401 Page 22 401 SERIES PNEUMATIC SPREADER STOKER FIG. NO. PART NUMBER 9 PS-400 9 PS-416 10 PS-422 9 PS-424 9 PS-475 10 PS-476 94 10 9 13 PS-461 PS-482 PS-I0I8VR 13 PS-1020 9& 10 10 9 10 10 10 12 11 9410 9410 9410 9410 10 10 PS-2265 PS-2278 PS-2279 PS-2281 PS-2282 PS-2296 PS-2366 PS-2367 PS-2369 PS-2371 PS-2372 PS-2375 PS-2392 PS-2393 PART NAME Belt Guard Spacer.................................. .................................................................... Motor Sheave.......................................................................................... Motor Sheave .............................................................................................................. Belt Guard..................................................................................................................... Fan Housing Assembly................................................................................................ Consi sts of: 1 - PS-352 Lower Tie Plate 1 - PS-354A Body Sheet 8 - PS-356 Tie Rod 2 - PS-357 Body Sheet Gasket 1 - PS-477 Leg - R.H. 1 - PS-478 Leg - L-. H. -F-an Housing..................................................................................................................... Consists of: 2 - PS-357 Body Sheet Gasket 1 - PS-364 Body Sheet 8 - PS-366 Tie Rod 1 - PS-477A Leg - R. H. 1 - PS-478 A Leg - L.H. Indicator Vane Rod Bearing Plate. .... ................................... Indicator Vane Rod ................................................................................................ Air Duct and Volumeter Assembly - 24 In, Long ................................... Consists of: 1 - PS-389 Volumeter Air Tube 1 - PS-736 Volumeter Diaphragm 1 - PS-1019 Air Duct - 24 in. Long 1 - V-2318 Regulator Rod Quadrant 1 - V-5I85A Regulator Panel 1 - V-5317 Volumeter Lower Housing 1 - V-5823 Regulator Damper Rod 1 - V-5835A Volumeter Upper Housing 1 - V-6524 Diaphragm Piston Rod 1 - V-6526 Piston Rod Yoke 1 - V-6527 Yoke Pin 1 - V-6535 Regulator Blade Air Duct and Volumeter Assembly - 24 In. Long .................................. Consists of: 1 - PS-252 Regulator Damper Rod 1 - PS-255 Volumeter Air Tube 1 - PS-734 Regulator Blade 1 - PS-736 Volumeter Diaphragm 1 - PS-1021 Air Duct - 24 in. Long 1 - V-2318 Regulator Rod Quadrant 1 - V-5I85A Regulator Panel 1 - V-5317 Lower Volumeter Housing 1 - V-5835A Upper Volumeter Housing 1 - V-6524 Diaphragm Piston Rod 1 - V-65 26 Piston Rod Yoke 1 - V-6527 Yoke Pin Indicator Vane Frame. ... .................................................................... Indicator Vane Plate. . .................................................................................. Indicator Vane Plate, ......................................................................................... Indicator Vane Rod ................................................................................................ Indicator Vane Rod ..... .............................................................. Indicator Valve .... ........................................................................... Fan Sheave .................................................................................................................... Belt Guard .................................................................................................................... Indicator Cable ...................................................................................................... Cable Connector ........ ................................................ Pipe Bracket ............................................................................................................. Sheave Housing Bracket ......................................................................................... Motor Plate................................................................................................................... Indicator Air Tube................................................................................................ 4s required QUAN. RtQ'D PG PG PG PG PG 4C 50 51 52 53 2 1 1 1 1 1 1 22 11 1 * 122 ** 1 1 1 22 1 1 22 1 22 11 11 1 1 22 11 1 1 122 1 1 1 22 1 1 122 1 1 1 22 1 1 22 1 1 22 IMPORTANT: Always specify stoker model number F| 6. HO. 11 * 12 PART NUM8ER PS-2394 PS-2395 PS- 2458 9410 9410 12 12 12 12 lu 10 to 11 12 12 12 12 11 10 94 10 9410 9410 9410 V-tll V-524 V-62G V-623 V-624 V-779 V-0222 .-- V-0225 V-0233 V-5020 V-5507 V-5508 V-5512 V-5524 V- 5553 V-5616 41436 41473 41477 41526 9,10a1 1 10 10 51123 51466 51467 9 PS-377 12 PS-421 * PS-425 * PS-426 * PS-427 9 PS-430 9 PS-432 9 PS-434 9 PS-435 Motor i oc.r\ i t-o in Lun hi i v o I\ 4- PART HAME Belt - Goodyear B-62.......................................................................................... Button PI no............................................................................................................... Fan Shaft Assembly .... .............................................................. Consists of: 1 - PS- 13 1 Beari ng 1 - PS-367 Fan Shaft Fan Screen ............................................................................................................... Fan Screen Ring ................................................................................................. Bearing Cover Plate . ................................................................................... Bearing Retainer ................................................................................................. Bearing Cover Plate - Drive End ..... ............................ Bearing Retainer - Drive End ..................................................................... Motor Pi ate.Spacer.......................................................................................... l/2-in. dia. x l/4-in. pipe Motor Plate Spacer .......................................................................................... l/2-in. dia. x 5/8-in. pipe Motor Plate Spacer .......................................................................................... l/2-in. dia. x 1--5/ 0-- i n. pipe Motor Sheave ........................................................................................................ Bearing Retainer - Drive End ..................................................................... Bearing Retainer ................................................................................................. Bearing Retainer Washer................................................ Fan Shaft Nut ........................................................................................................ Motor Sheave ........................................................................................................ Motor Sheave............................ ...... .................................................................... Indicator Valve Body Weight ........... Indicator Valve ................................................................................................. Indicator Valve Body. . ............................................................................ Housing and Sheave Assembly ..................................................................... Const sts of: 1 - 40076 Spacer 2 - 40078 Washer 1 -- 41231 Sheave Housing 1 -41232 Sheave Housing Cover 1 - 41527 Cable Sheave Belt - Goodyear B-bO.......................................................................................... Air Tube Elbow..................................................................... ...... Air Tube Connector .......................................................................................... PARTS USED WITH 25 CYCLE MOTOR ON PG-4C FAN UNIT Motor Plate.............................................................................................................. Motor Sheave .......................................... ...... ................................................ Auxiliary Fan Housing Inner Plate .................................. ... Auxiliary Fan Housing Band............................................................................ Auxiliary Fan Housing Outer Plate .................................. ... Fan Wheel .............................................................................................................. l-in. x 14-1/3-in. Belt Guard......................................................................................... Motor Spacing Bar.............................................................. ...... Belt - Gates #3680 .......................................................................................... i H.P.-I450 R.P.M., 220 Volt, 25 Cycle, 3 Phase, BallBearing K-224 Frame . -. Page 23 (JUAN. REIJ'D PG PG PG PG PG 4C bO 51 52 S3 2 i 1 22 1 1 i 1 22 1 i 1 22 1 i 1 22 1 i 1 22 2 .2 2 4 4 1 1 22 44 4 4 1 2 1 122 1 1 22 1 122 1 1 1 22 1 1 1 1 1 22 1 1111 1 1 1 22 1 1 1 22 1 111 1 1 22 3366 1 1 1 1 1 1 1 2 1 PARTS USED WITH 60 CYCLE OVERSPEED ON PG-4C FAN UNIT 9 PS-377 10 PS-421 9 PS-432 9 PS-434 9 PS-435 Motor Motor Plate.............................................................................................................. Motor Sheave ....................................................................................................... Belt/Guard.............................................................................................................. Motor Spacing Bar..................................................................... ...... Belt - Gates #3680 .......................................................................................... 2 H.P., 1750 R.P.M., 220 Volt, 60 Cycle, 3 Phase, K-224 Frame 1 1 1 2 1 ' Wot 11 lustrated. IMPORTANT: Always specify stoker model number X X XC iJ t " *tu J. Page 24 HUi otKito PNtUMAIIC SPREADER STOKER * FIG. NO. PART NUMBER * * * PS-923 PS-927 PS-885 * * * ft ft ft * PS-889 PS-893 PS-898 PS-903 PS-907 PS-911 PS-919 ft PS-925 PS-929 PART NAME OPTIONAL AIR DUCT EXTENSIONS AND ELBOWS FOR UNDERGRATE FAN UNITS Air Duct Extension - 24-In................................................................................ Air Duct Extension - 48-In................................................................................ 45 Elbow - Horizontal.................................................................... ...... 45 Elbow - Horizontal......................................................................................... 90 Elbow - Horizontal......................................................................................... 90 Elbow - Horizontal. . ........................................................................... Vertical Elbow - Rectangular Outlet ......... Vertical Elbow - Rectangular Outlet ......................................... . . Vertical Elbow - Square Outlet ... ................................................ Vertical Elbow - Side Outlet. ........... Air Duct Extension - 24-In........................................................... ....... Air Duct Extension - 48-In............................................................................... * Not illustrated " As Required QUAN. REQ'D PG PG PG PG PG 4C 50 51 52 53 ** ** * ftft ** ftft ** ft* ft* ** ** ** ** K* ft* ftft ** ** ft* ft* ft* ft* ft* ** ft* ft* ft* ** ft* ft* ft* ** ft* PARTS LIST IV i COMPONENT PARTS OF PS-2470 REPLACEMENT CONVEYOR FAN ASSEMBLY FIG. NO. PART NO. PART NAME QUAN. REQ'D PF-0225 Butt Nipple - 3/4-14 X 1" Long-Straight Pipe Thread (Not Illustrated) . PF-0358 Nipple - 1/4" X 6" Long-For PS-2098 Fan Shaft Oiler (Not Illustrated) . 4 PS-2097 Seal Ring.............................................. .......................................................................................... 4 PS-2098 Fan Shaft Oi 1 ................................................................................................................................. 4 PS-2099 Breather Tube ....................... ...... ......................................................................... 4 PS-2100 Water Cooled Bearing Retainer ........................................................... . ....................... 4 PS-2102 Leveling Studs....................... .... ................................................................................................... 4 PS-2103 Fan Spacer........................................................ 4 PS-2111 Fan Inlet Plate ............................................. 4 PS-2114 First Stage Liner ......................................... 4 PS-2116 Fan Interstage.................................................. 4 PS-2117 Second Stage Liner......................................... 4 PS-2119 Conveyor Fan Housing.................................... 4 PS-2123 Back Plate Insulation - 3/8" Thick. , 4 PS-2125 Insulation Cover Sheet................................ 4 PS-2132 Wrapper Sheet .................................................. 4 PS-2160 Fan Bearing Housing Support.................. 4 PS-2176 Balancing Hub Assembly................................ 4 PS-2350 Seal Plate........................................................... 4 PS-2353 Dust Check Ring ............................................. 4 PS-2410 Retainer Ring.................. ............................. 4 PS-2434 Fan Wheel ........................................................... 4 PS-246 I Balance Ring...................................................... 4 PS-2462 Inner Balance Ring......................................... 4 PS-2463 Fan Bearing Housing.................................... 4 PS-246 5 Gasket.................................................................... 4 PS-2468 Fan Shaft Assembly......................................... Consists of: 4 - 40120 Retainer Ring I - 38298 Spacer 1 - PS-2105 Fan Shaft I - PS-2466 Bearing -N. D. 2 - PS-2460 Oiler Guide #97507 I - PS-2467 Bearing - N.D. #97607 PS-2484 Fan Housing Seal. . .................................... PS-2485 Fan Housing Seal............................................. 40048 Key ........................................................................ 80348 Flare Nut (Not Illustrated) .................. 80689 Brass Elbow ....................................................... 1 1 1 1 1 1 3 IMPORTANT: Always specify stoker model number hu i ocrvica rNtUMAl U- bFKtAUtK blUKhK * File No. 7-401 Page 25 Figure 14 - PS-2413 Nozzle Assembly - Refer to Parts List I (Pg 10) Figure 15 - Coal Agitator Parts - Refer to Parts List I (Pg 10) IMPORTANT: Always specify stoser model number Fage 26 -* W l\ l_l\ * IMPORTANT: Always specifv stoner model number *ru i oli\ i i_o i nuurm 10 Ol owt\L.f\ lllic^no. (- wa 27 F ig u r e 17 - Dump G ra te P a r ts - R e fe r t o P a r ts L i s t (P g 1 0 )I IMPORTANT: Always specify stoker model number Page 28 -TV I ULt' < UV I IU.U>`ini I V <JI U L L. I' O I U IN U l\ (Jj F ig u re IS - S ta tio n a r y G ra te F a rts - R e fe r to F a rts L i s t (P g 1 0 )I LJ < (/> UJ Q CO IMPORTANT: Always specify sicker model number