Document 3QaRDv4oRvRqMvB6km2JOY0JD
IVlAI tKIAL SAt-tzl Y UAIASMtH
n
Itwniiillr similar e Ui Oaeartmant ( Libor Form OSHA 701 An Mb'iniltOo of ff># rtrmi uma he run mtr b* fOvntf in OSHA PublicHiO* 7765 #riltbll from OSHA rvptoml or iri offices
Do Not Ouplrtni This Form Roqwotl an Oupmol
PRODUCT Air (High Pressure Gas)
CHEMICAL
NAME
/Air?
FORMULA
----
TRADE NAME Air
I. PRODUCT IDENTIFICATION
SYNONYMS
CHEMICAL FAMILY MOLECULAR WEIGHT
Synthetic air. reconstituted air
-- --
II. HAZARDOUS INGREDIENTS
For mixtures of this product request the respective component Material Safety Data Sheets See Section IX
MATERIAL
Wt (%>
1982 ACGIH TLV-TWA (Units!
Air 100 Not hazardous
*"(
BOILING POINT, 760 mm. Hg
SPECIFIC GRAVITY (H2O - 1)
VAPOR DENSITY (air - 1) PERCENT VOLATILES BY VOLUME APPEARANCE AND ODOR
III. PHYSICAL DATA
NA
FREEZING POINT
NA
Gas
VAPOR PRESSURE AT 20'C.
Gas
SOLUBILITY IN
1.0
WATER. % by wt.
Negligible
EVAPORATION RATE
100
(Butyl Acetate 1)
NA
Colorless, odorless, synthetic gas.
EMERGENCY PHONE NUMBER
3
"*
V
f'
IN CASE OF EMERGENCIES involving this material, further information is available at all times at 304 - 744 3487 For routine information contact your local supplier.
Union Carbide Corporation requests the users of this product to study this Material Safety Data Sheet (MSDS) end become -ware of product hazards and safety information. To promote safe use of this product e user should (1) notify its employees,
jgents and contractors of the information on this MSDS and any product hazards and safety information, (2) furnish this same informati n to each of its customers for the product, and (3) request such customers to notify their employees and customers f r the product f the same product hazards d safety information.
UNION CARBIDE CORPORATION LINDE DIVISION Old Ridgebury Road, Danbury, CT 06817
DO A 061561 CONFIDFNTIAl
IV. HEALTH HAZARD DATA
threshold limit value
Not haiardous
"&ECTS OF OVEREXPOSURE AND EMERGENCY AND FIRST AID PROCEDURES
G
^ NA
$
l>i9>2oU
DO A 06156? CONFIDENTIAL
r* V. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (tut method)
FLAMMABLE LIMITS IN AIR, % by volume
LOWER
NA NA
AUTOIGNITION TEMPERATURE
UPPER
EXTINGUISHING MEOIA
Oxidizing agent. May accelerate combustion. Use media appropriate lor surrounding lire.
NA * NA
SPECIAL FIRE FIGHTING PROCEDURES Evacuate all personnel Irom danger area. Immediately cool cylinders with water spray trom maximum distance until cool then move containers away Irom lire area i! without risk. Shut oil leak i! without risk.
UNUSUAL FIRE AND EXPLOSION HAZARDS Oxidizing agent, may accelerate combustion. Contact with flammable materials may cause lire or explosion Conta.ner may rupture due to heat ol lire. No part ol a container should be subjected to a temperature higher than 52 C (approxi mately 125*F|. Most containers are provided with a pressure relief device designed to vent contents when they are exposed to elevated temperature.
VI. REACTIVITY DATA
STABILITY CONDITIONS TO AVOID
UNSTABLE STABLE X
See Section IX.
INCOMPATIBILITY (materials to avoid)
Flammable materials.
HAZARDOUS DECOMPOSITION PRODUCTS
NA
HAZARDOUS POLYMERIZATION
May Occur
Will not Occur
X
CONDITIONS TO AVOID None currently known.
VII. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Shut oil cylinder, if without risk.
( WASTE DISPOSAL METHOD Slowly release mto atmosphere. Discard any product, residue, disposable container or Imer in an environmentally acceptable manner, in full compliance with federal, state and local regulations.
HO A 061563 CONFTDFNTTAI
. #*
1
VIII. SPECIAL PROTECTION INFORMATION
JISPIRATORY PROTECTION ispecify tyP> N I required.
7 LOCAL EXHAUST
S -f
VENTILATION
MECHANICAL (general) Adequate
SPECIAL
-------------
OTHER
-------
PROTECTIVE GLOVES EYE PROTECTION OTHER PROTECTIVE EQUIPMENT
Preferred for cylinder handling. Safety glasses Metatarsal shoes for cylinder handling.
IX. SPECIAL PRECAUTIONS
WARNING: High pressure gas May accelerate combustion. Keep oil and g'ease away. Close valve when not in use and when empty. Use piping and equipment adequately designed to withstand pressures to be encountered.
,,.,T*JRS: When two or more gases, or liquefied gases are mixed, their hazardous properties may combine to create additional, tu..^ *ted hazards. Obtain and evaluate the safety information for each component before you produce the mixture. Consult n jjtnal Hygienist, or other trained person when you make your safety evaluation of the end product. Remember, gases and liquids have properties which can cause serious injury or death.
OTHER HANDLING AND STORAGE CONDITIONS Store and use away from flammable materials.
The opinions expressed herein are those of qualified experts within Union Carbide Corporation. We believe that the informa tion contained herein is current at of the date of this Material Safety Data Sheet Since the use of this information and these opinions Bid the conditions of use of the product are not within the control of Union Carbide Corporation, it is user's obligation to determine the conditions of safe use of the product
L 4S60-8 83-0921 4.13 1M P9t 4 ol 4
Second Printing
UNION CARBIDE CORPORATION LINDE DIVISION
GENERAL OFFICES OANBURV. CT. OFFICES IN PRINCIPAL CITIES
00 A 061564 CONFIDENTIAL
Liiriognc*'d i" USA