Document 3NLZzmbaQpopJ2Xa0p2V3ZM1a

"BAKELITE" VINYL SOLUTION COATINGS RESIN VAGH - 1 . ____ ___ _ VAGH -1 DESCRIPTION VAGH-1 is a hydroxyl modified vinyl chloride-acetate resin compatible with a wide variety of other surface coating ma 3 terials including various types of oleoresinous varnishes as well as drying and nondrying alkyds. VAGH-1 resin also is compatible with certain epoxy, ureaformaldehyde, and melamine resins, cross-linking with them through the May 25, 1962 hydroxyl groups to produce coatings with improved resistance to heat and chemicals, VAGH-1 is of special interest to formulators because this resin can be used to improve the properties of other vehicles. VAGH-1 resin films exhibit good color and excellent flexibility. Properly formulated coatings based on VAGH-1 produce films with excellent toughness and hard ness, good adhesion to a variety of substrates, excellent resistance to abrasion, good gloss, and outstanding resistance to water, alcohols, aliphatics, inorganic acids, and mineral alkalies. Pigmented coatings of VAGH-1 resin have good color and retain their gloss under exterior exposures. VAGH-1 resin is chemically neutral, non-oxidizing, tasteless, and odorless. PROPERTY Specific gravity Heating loss, 45 minutes at 105 C, per cent by weight Polyvinyl chloride, per cent by weight Polyvinyl alcohol, per cent by weight Lead, ppm Specific viscosity 1.0 gm/methyl isobutyl ketone/20.00 C Inherent viscosity 0.2 gm/cyolohexanone/30 C Viscosity, centipoises; 20% resin in 1:1 methyl isobutyl ketone: toluene/20.0 C Color, light transmission at 475 m/J., per cent; 18% resin/methyl isobutyl ketone RE5IN PROPERTIES TESTING METHOD D792 WC-160-H WC-29 4-A WC-93-F WC-20-B; or WC-20-D (instrumental) WC-609-L-1; WC-31-B-2 WC-31-B-4 D 1243, Method A WC-31-L WC-5-K TYPICAL 1.36 2.0 90 5.7 <5 0.59 0.525 400 80 ucc 039343 "BAKELITE", "KRENE", "VINYLITE" and UNION CARBIDE are registered trade marks of Union Carbide Corporar!o; The recommendations, test rftyjlK, ny their performance. The properly j <n .t-; - testing methods as mdiVute'l '-'r-ipri-r , are closely controlled I? c-o.dIho- ' - r ;v\ bide Plastics Technical Rear e , Tf-v v - ` .in C - product at any time, BA-326-I45A r C,f :h* mi' O' men ,, " *,r* r '-J 't ` , -i, f - -- ' 71 , - 1 - ` -111 J J ,- TESTING METHODS The properties described in this Plastics Product Standard are measured in accordance with current issues of the specified testing methods. Methods of the American Society for testing Materials are identified by the prefix letter "D". Standard Testing Methods of Union Carbide Plastics Company are identified by the prefix letters "WC". Details of the "WC-" methods are available on request. PACKAGING The standard package for BAKELITE vinyl solution coatings resins is a four-ply multiwall Kraft paper bag containing 50 pounds of material. LABELING AH containers of BAKELITE vinyl solution coatings resins are plainly marked with the product number, lot number, and net weight. Shipments will be so addressed as to assure complete delivery to the purchaser. i !C'u'lfL-' 1-fSSc; "BAK ELITE" VINYL SOLUTION COATINGS RESIN VAGH - 2 VAGH-2 DESCRIPTION VAGH-2 is a hydroxyl modified vinyl chloride-acetate resin compatible with a wide variety of other surface coating ma terials including various types of oleoresinous varnishes as well as drying 2 and nondrying alkyds. It is a grade of VAGH designed particularly for ap plications requiring a resin with higher solution viscosity. VAGH-2 resin May 25, 1962 also is compatible with certain epoxy, urea-formaldehyde, and melamine res ins, cross-linking with them through the hydroxyl groups to produce coatings with improved resistance to heat and chemicals. VAGH-2 is of special interest to formulators because this resin can be used to improve the properties of other vehicles. VAGH-2 resin films exhibit good color and excellent flexibility. Properly formulated coatings based on VAGH-2 produce films with excellent toughness and hardness, good adhesion to a variety of substrates, excellent resistance to abrasion, good gloss, and out standing resistance to water, alcohols, aliphatics, inorganic acids, and mineral alkalies. Pigmented coatings of VAGH-2 resin have good color and retain their gloss under exterior exposures. VAGH-2 resin is chemically neutral, non-oxidizing, tasteless, and odorless. PROPERTY Specific gravity Heating loss, 45 minutes at 105 C, per cent by weight Polyvinyl chloride, per cent by weight Polyvinyl alcohol, per cent by weight Lead, ppm Specific viscosity 1.0 gm/methyl isobutyl ketone/20.00C Inherent viscosity 0.2 gm/cyelohexanone 30C Viscosity, centipoises 20 per cent resin in 1:1 methyl isobutyl ketoneitoluene at 20.00 C Color, light transmission at 475 m/U., per cent; 18 per cent resin/methyl isobutyl ketone RESIN PROPERTIES TESTING METHOD D 792 WC-160-H WC-294-A WC-93-F WC-20-B, or WC-20-D (instrumental) WC-609-L-1; WC-31-B-2 WC-3 l-B-4 D 1243, Method WC-31-L WC-5-K TYPICAL VALUE 1.36 2.0 90 5.7 <5 0.61 0.543 530 80 UCC 039345 "BAKELITE", "KRENE", "VINYUTE" and UNION CARBIDE are registered trade marks of Union Carbide Corporation The recommendations, test results, property values, and suggestions are offered herein as a gude in the use of these muter'a ; and or*1 not their performance. The property values given are those to be expected in the product at the time of manufacture Th >v vulu1 a'" d `f.'rvli nr testing methods as indicated Properties mare cerfoin to be realized are measured with lesser frequency than others as u us.n ' - m ore clasely controlled If applications require continual verification of o certain property or propartie$, reciuirem^Tts shai-'d 'j hide Plastics Technical Representative Union Carbide Plastics Company reserves the right alter the formukifijn ar'd `c .u, i- product Ot any time. a nuctr:mv-<; iu i ' i l1 < -' j-.u : \ . ->f &A-326-U5A TESTING METHODS The properties described in this Plastics Product Standard are measured in accordance with current issues of the specified testing methods. Methods of the American Society for Testing Materials are identified by the prefix letter "D". Standard Testing Methods of Union Carbide Plastics Company are identified by the prefix letters "WC", Details of the "WC-" methods are available on request. PACKAGING The standard package for BAKELITE vinyl solution coatings resins is a four-ply multtwall Kraft paper bag containing SO pounds of material. LABELING All containers of BAKELITE vinyl solution coatings resins are plainly marked with the product number, lot number, and net weight. Shipments will be so addressed as to assure complete de livery to the purchaser.