Document 37Dyx57Q1qezLM9MwQzbVnzgD

SPE--VCM CONFERENCE Revised Program - Thursday, October 31 AXTACIJME2IT B ; :45 a.m. Welcome & Introduction - Avron B. Magram, Vice President, Hatco Chemical Division, W.R. Grace & Co.; President, Palisades Section, SPE ;00 a.m. Keynote Address: "What is the Vinyl Chloride Monomer (VCM) Problem?" Richard Fleming, Vice President, Chemicals Group, Air Products & Chemicals, Inc. 30 a.m. "VCM & PVC Resin Manufacture" - Dr. Paul Lobo, Group Director, Organics & Polymers Division, Tenneco Chemicals, Inc. ;C0 a.m. "VCM From Resin Shipment Through Fabrication" - Rodney P. Becker, Manager, PVC Applications & Technical Service - Frederick A. Sacks, Applications Engineer, Plastics Division, Diamond Shamrock Chemical Co. ;30* a.m. Coffee Break - Moderator: Dr. Lewis R. Weisfeld, Vice President & Scientific Director, Cincinnati Milacron Chemicals, Inc. :45 a.m. Continuation of "VCM From Resin Shipment Through Fabrication" :15 a.m. "VCM - The FDA Viewpoint" - Gerard L. McCowin, Assistant to the Director, Division of Food and Color Additives, Food & Drug Administration (FDA), Washington, D.C. :15 p.ra. I Luncheon - Imperial Ballroom B Guest SPE Speaker: John H. Myers, President SPE; General Manager, Research & Development; Delaware Plastics Division, Container Corp. of America Guest Luncheon Speaker: Glenn E. Schweitzer, Director, Office of Toxic Substances, U.S. Environmental Protection Agency, Washington D.C. :00 p.m. "VCM - The EPA Viewpoint" - Analytical Devices & Methods Moderator: Dr. Gerald J. Mantell, Director of Research, Air Products & Chemicals, "Determination of Vinyl Chloride in Workplace Air" - Dr. Robert H. Hill, Jr., Chemist, Department of Health, Education & Welfare, Public Health Service, Physical & Chemical Analysis Branch, DLCD, National Institute for Occuational Safety & Health (NIOSH), Cincinnati, Ohio Inc. :20 p.m. "Monitoring Methods for VCM at Western Electric" - Dr. Frank M. Zado & Dr. J.O. Rasmuson, Western Electric Research Center :40 p.m. "Analysis for VCM in PVC Resins, Compounds and Extractants" - Roland Lancaster, American Can Co. :00 p.m. "VCM - The OSHA Standard and Its Interpretation" - To be featured with a question and answer conference session via telephone, featuring OSHA experts from OSHA's Standards and Compliance Groups in Washington, D.C. OCC 1009