Document 2jn0g7VK8O4RdkKmxrXk97y2L

JR-P&C FORGED JiTEEL VALVES 1^190 150 lb. Flanged End F-390 300 lb. Flanged End F-690 600 lb. Flanged End Sizes. W Thru 2" PISTON CHECK VALVE BOLTED CAP 150 P.S.I. @ 500F. 300 P.S.I. @ 850F. 600 P.S.I. @ 850F. (For Horizontal Installation Only) WORKING PRESSURE (NON-SHOCK) F-190 -- 150# FLANGED END 150 PSI @ 500*F STEAM-OIL 275 PSI @ --20*F TO 100*F TEST PRESSURE: 425 PSI HYDROSTATIC SHELL F-390 -- 300# FLANGED END 300 PSI @ 850*F STEAM-OIL 720 PSI @ --20*F TO lOO'F TEST PRESSURE: 1100 PSI HYDROSTATIC SHELL F-690 -- 600# FLANGED END 600 PSI @ 850*F STEAM-OIL 1440 PSI @ --20*F TO 100*F TEST PRESSURE: 2175 PSI HYDROSTATIC SHELL No. Part 1 Nameplate 2 Cap 3 Bolt, Cap 4 Gasket 5 Disc 6 Body MATERIALS OF CONSTRUCTION Material AS.T.M. Spec. Remarks Aluminum -- Commercial Forged Steel A105 Grade 11 Alloy Steel A193 Grade B7 Stainless Steel Asbestos Filled Spiral Wound Stainless Steel A276 Type 420 (BOO BHN) Forged Steel A105 Grade II Seat Stellite #6 w///. TRIM SELECTION CHART WM Figure Number Body A Bonnet Disc & Integral Seat Bonnet Gasket Packing F 190 OE F 190 A F 190 M F 190 MT A-105Gr.ll A-105Gr.ll A-105 Gr. II A-105 Gr.ll CR 13' 316S.S. Monel Monel 304-ASB 304-ASB Monel-ASB Monel-TEF -- -- -- -- `Integral seat Stellite-Faced Note: F 390 (300#- Fit) & F 690 (600# Fig) Also Available In Above Trims Valves with Tellon trim are limited to 500* F service. DIMENSIONAL SPECIFICATIONS Face to Face Size F-190 F-390 Vt 4/ 6 y* 4/'! 7 i 58 i y, 6'A 9 2 8 10/, IConlormjto ANSI-B16.10 ('IncludesX." Raised Faces fF-690 6'A VA 8'A 9 'A n'A tInclude! Center to Top (Open) 2 2V, 2V, 3 '/. -.4H Raised Feces). Gasket Size Vi Thick 1% x l'A l%xl V* 1%*1% 2H, xl% 2%x2 y. Dia. of Port Opening V, 'A % VA l'A F-190 6 6A 10 17 26 Approx. Weight F-390 l'A 9/ 11 22 32 F-690 VA 10/ 12 25 34 0-0 c FAIRVIEW, PA. 16415 TELEPHONE: 814-474-5581 TCI CY- QlwLdRd. One of the White Consolidated Industries Wfg! CHEV BB 0000197 R-P&C FORGO STEEL VALVES ^-90 Screwed End Sizes: i/4"Thru2" F-91 Socket Weld End PISTON CHECK VALVE BOLTED CAP 800 P.S.I. @ 850F. (For Horizontal Installation Only) WORKING PRESSURE (NON-SHOCK) 600 PSI @ 900*F STEAM-OIL 800 PSI @ 850*F STEAM-OIL 2000 PSI @ --20*F TO 100'F TEST PRESSURE: 3000 PSI HYDROSTATIC SHELL No. Part 1 Nameplate 2 Cap 3 Bolt, Cap 4 Gasket 5 Oise 6 Body MATERIALS OF CONSTRUCTION Material AJS.T.M. Spec.- Remarks Aluminum -- Commercial Forged Steel A105 Grade II Alloy Steel A193 Grade B7 Stainless Steel Asbestos Filled Spiral Wound Stainless Steel A276 Type 420 (500 BHN) Forged Steel A105 Grade n Seat Stellite #6 Figure Number ` F90DE F90 A F 90 M F 90 MT TRIM SELECTION CHART Body & Bonnet Disc & Integral Seat Bonnet Gasket A-105 Gr. II A-105 Gr. II A-105 Gr. II CR 13* 316S.S. Monel 304-ASB 304-ASB Monel-ASB A-105 Gr. II Monel Monel-TEF Packing -- -- -- -- "Intieral it SUllitaFactd Valves with Teflon trim are limited to 500* F service. Note: F 91 also available In above trims. Size A V. A A 1 1A lA 2 Conforms to ANSI B16.ll Face to Face 3 3 3 3A *A 6 6 7 Center to Top 2 2 2 2A 2A 3A 3A 4A DIMENSIONAL SPECIFICATIONS Gasket Size Vt Thick Dia. of Port Opening WuxlA A 1 %xlA l%xl A l%xl K l%xl% 2% x 1% V. A A l 2?<* x 1% 2%x2y. 1A VA Socket Weld Bore* .555 .690 .855 1.065 1.330 1.675 1.915 2.406 Socket Weld Depth* A y. A A A A A A Approx. Weight 3A 3A 3A 3A 5A 11 11 UA R-P&C FAIRVIEW, PA. 16415 TELEPHONE: 814-474-5581 TELEX: 91-4454 One of the White Consolidated Industries Wgi ^HEV BB 1000198 CRANE SWING CHECK VALVE CLASS 600K" to 12' No. 174, T-Pattern Bolted Cap No. 174, Threaded No. 175, Flanged No. 175y2, Butt-Welding Pressure-Temperature Rating Carbon Steel, ASTM A216 Grade WCB 1480 psi @-20F to 100F See page 55 for ratings of other materials and temperatures Design Data and Features: These valves comply with applicable requirements of Standards: ANSI-B16.5, ANSI-B16.10, ANSI-B16.25, ANSIB 16.34. Material--carbon steel. Other materials available when specified--Crane No. 5, 7, 9, LCB and "Arctic" steels. See page 3 for specifications and recommendations. Trim--X or XU--suitable for a broad spectrum of services to 1100F. Other trims available when specified include: L or LU and A or AU. See pages 3 and 22 for trim descrip tion and service recommendations. Outside weight and lever to assist in rapid closing or for sensitive balance at low velocities is available on valves up to 8" in size. Drilling templates are.shown on page 51. Flange and facing dimensions are shown on page 47. * Ring joint facing (page 48) can be supplied when specified. Butt-welding ends are bored to match the inside diameter of the pipe to be used. Orders must specify the diameter of bore (I.D. of pipe). See page 45. Threaded end valves are furnished with spiral wound stain less steel asbestos filled bonnet gasket. Flanged and butt-welding end valves are furnished with ring type joint bonnet gasket. Threaded end valves in sizes Vz", and 1" are Y-Pattern with seat and cap at 45 to run of valve. * For test information, see page 54. No. 174, Y-Pattern ril"LJ"l___IfLLL No. 175V2 * 1 a*VT Weight--Pounds Dimensions--Inches Valve N.P.S. Vz i Vh 1 Vz 2 21/2 3 4 5 6 8 10 12 l1iy74il I1I j7i4t Pattern Pattern 5-- 8-- 11 -- -- 22 -- 29 -- 36 ---- -- -- ---- ---- ---- ---- ---- -- . --- 175 -- -- -- 38 50 70 104 135 255 400 530 900 1250 1830 A 175 Vi 1,,y/.9 IIJM 175 & Pattern Pattern 175% -- -- -- 32 40 55 70 100 170 300 420 740 1030 1410 4.62 6.00 7.00 -- -- -- -- -- -- -- -- -- -- -- ---- -- -- ---- 7.50 9.0 8.50 9.5 9.50 11.5 -- 13.0 -- 14.0- -- 17.0 -- 20.0 -- 22.0 --- 26.0 -- . 31.0 -- 33.0 "S" pattern is straightway design, as illustrated. B 174 175 & 175% 3.38 -- 4.00 -- 4.50 -- 5.50 6.25 6.25 6.75 6.25 7.00 . 8.25 * . . 9.00 _ 10.25 -- 12.75 -- 13.50 -- -- 15.25 18.75 oMo -- 21.50 > Cd sc 661000