Document 2Jr8e1dXm9520rdnnVRD71EjL

200 Air System Equipment BAYLEY BLOWER COMPANY Engineered Air-Handling Equipment 1821 S. Sixty-Sixth St. Milwaukee 14, Wis. Representatives In Principal Cities GENERAL VENTILATING & AIR-CONDITIONING FANS Bayley Type AP Fans have backward-inclined blades, non-overloading power characteristic. They are made in Classes 1, II, III A IV for air-conditioning systems, plant and building ventilation, process air-bandling, mechanical draft. Sizes from 12}{-in. to 132)4-in- wheel diameter, capacities from 1000 to TOO,000 cfm, all standard drive arrangements, single and double width. Complete line of modifications and accessories. Sizes up to 365 (36H~iQ- wheel diameter) have reversible housings, facili tating prompt delivery of any discharge position in popular drive arrangements. All standard housings are made with scroll seams inside-welded for strong, tight con struction, smooth exterior. BELTED VENTILATING SETS Compact unitary sets, complete with drive and motor, serve a wide variety of applica tions, such as kitchens, gymnasiums, lavatories, garages, restuarants, hospitals, laboratories, industrial plant areas. Sets may be used for supply or exhaust ventila tion. They are available in wheel diameters from 9-in. to fr capacities from 500 to 15,000 cfm. Smaller sizes have Type F forward-curved wheels, larger sizes have Type AP backward-inclined wheels, as required for most suitable drive selections. Wheels and housing are of same design and construction as regular Class I fans. Pro tective drive covers and automatic outlet louvres are available for outdoor installa tion. DIRECT-DRIVEN VENTILATING SETS Sets with forward-curve wheel mounted on motor shaft are particularly suited for light-duty low-capacity requirements. Wheel sizes from 4)4-in. to 10)4-in., capacities from 100 to 1500 cfm. Larger sizes, made to order as regular arrangement 4 fans. Typical applications include small rooms, booths, cabinets, compartments, equip ment cooling. Housings and wheels are designed and built for permanency under hard usage. Inlet screens and filters are available. Also can be equipped with motor cover for outdoor installation. These sets are particularly recommended for in corporation as ventilating or cooling fans in factory-built apparatus. INDUSTRIAL EXHAUST FANS Type EX Fans are of the radial-blade medium speed design best suited to the wide diversity of industrial air-handling requirements. Sizes range from 5-io. to 60-in. inlet diameter, &-%-in. to 104)4-in. wheel diameter. 200 to 55,000 cfm capacity. Style OP. open, back-plate wheels are recommended for the majority of materials handling applications. Style AH closed wheels are designed for maximum efficiency when handling clean sir or gas. Many modifications and special construction features can be incorporated for unusually severe conditions of abrasion or corrosion. Tem peratures up to 1450 F can be handled with appropriate bearing selections and heat flinger arrangements. PRESSURE FANS Type H Fans are proportioned to suit high pressure/volume ratio characteristically required in certain phases of pueumatic conveying, cupola blast, burner draft, suction or blast cleaning, and the like. Usual pressure range is from 12-in. WG to 55-in. WG (2 psi). Four designs are offered: No. 1, to 21-in. SP; No. 2, over 21-in. to 28-in. SP; No. 3, oyer 28-in. SP to 35-in. SP; No. 4, over 35-in. SP. While basic sizes and propor tions are established, the necessary flexibility of selection for the wide range of pres sure volume combinations is provided by varying widths of fans as required. Wheel diameters are also variable in sufficient degree to achieve proper operation at stand ard direct-connected motor speeds. Air System Equipment n 201 BROOKSIDE ORRORATION McCordsville, Indiana Manufacturers of: Fans Blowers Ventilating Equipment Brookside Corporation is large, enough to serve you well--small enough for frequent contact between management and production supervisory personnel to insure topquality and coordination of all customer requirements. Brookside offers custom en gineering free of charge--and production at competitive prices. A company-owned airplane is maintained to offer the fastest possible service and engineering assistance when it is necessary. M-PEL-AIR 6-BLADE ONE-PIECE FANS; One piece fans in a wide range of sizes from 6 in. diameter 4-Blade to 14 in. diameter 6-Blade. Some models with slinger rings for room air conditioner application. Manufactured of aluminum or steel. 4-Blade with Ring M-PEL-AIR AUTOMOTIVE TYPE: Heavy-duty automotive type fans, both angle and double spider types, in both steel and aluminum blades. A wide range of sizes from 10 in. diameter through 85 in. diameter. Available in 4, 5, 6, and 8 blade designs. Suitable for use on gasoline or diesel engines and cooling tower applications. 4-Blade without ring 6-Blade without Ring M-PEL-AIR ROOF EXHAUSTERS: Available in a wide range of models and types ranging from 250 cfm to more Bum 11,000 cfm. Spun aluminum construction with aerodynamic design for greater efficiency. Entire line features extremely low sil houette. Backward inclined, non-overloading centrifugal fan wheels assure quiet oper ation. M-PEL-AIR GRAVITY ROOF EXHAUSTERS: Engineered and designed for fresh air intake or relief of pressure within building. Lightweight, spun aluminum housing construction. 8 Models. Motor operated or spring loaded back-draft eliminators, cylindrical bird guards, bug screens optional on all models. Offset Type M-PEL-AIR BELT DRIVE ROOF F.YHAIfftrV.ftfi; Power unit 13 resilient-mounted for quiet operation. Fan wheel design, unrestricted air flow make for quiet operation. Rigid spun aluminum housing. All belts, pulleys, bearings and motors standard sizes. Low silhouette blends well with- contemporary architecture. Direct Drive Exhauster 4-5-6 & 8-Blade Autoraoti re Type M-PEL-AIR FAN BLADES: Slinger-type for air conditioning or offset spider and conventional propeller type fans for ventilating and other applications. All engineered exactly to your specifications free of charge. Slinger rings are all one-piece die drawn. Research and laboratory facilities available to solve air moving problems on your product. M-PEL-AIR SIX BLADE: One-piece or fabricated construction in a wide range of diameters, any pitch, in aluminum or steel. Gives efficient air movement against higher static procures. Solid or resilent hub. Also available in three and four blade. Gravity Roof Exhausters 6-Blade One Piece M-PEL-AIR OFFSET TYPE: Gives maximum space-saving features by bringing blade around the motor. Brookside's advanced design blades give higher efficiency and may be made reversible. M-PEL-AIR SLINGER BLADE: Solid die-drawn slinger rings, with the tabs a part of the blade, operate at low sound level and high efficiency. Designed especially for air conditioning and refrigeration industry. Belt-Dri ve Exhausters 100 Series - M-PEL-AIR 100 A 200 SERIES BLOWERS: 100 series specifically designed for higher pressure applications. Rugged construction with conical shaped inlet ring welded to blades. Available from 14 to 60 inch diameter. Series 200 designed for lower pressures. Fabricated of aluminum, stainless, or steel, riveted throughout. Both series have backward inclined blades for low noise and non-overloading characteristics and are statically and dynamically balanced. 200 Series