Document 2JMwNQzjnj5NL7d9v7KqJ49zR

LOVAP NV - iaus-Michael Kuehnelaan 11 - 82440 GEEL Fax 01458 1706 infoBlovap.be wlovap be HARDICK BV For the attention of Mr. Nieland Thermen NL- 7521 PS Enschede NEDERLAND REPORT B13/R7451/0001 " Re: Migration testsof Kevlar foil coated with PTFE Report date: 28.05.13 Dateofreceipt : 22.04.13 SAMPLE DESCRIPTION: LOVAP ref, Yourref, 13/LG06602 foil : Kevlar coated with PTFE `The product may, according to the supplier, be exposed to a maximum temperature of 230C. RESEARCH: "The tests were carried out according: ~ Regulation 10/2011 on plastic materials and articles intended to come into contact with food Do bJeparomoipnggsaeasugtatweendheenbbeDnt uersatgedmgbeitktdwionrgdoen cgeerbeepprroocecledac,bebceent.asfonrvmladtgseanvgoama,ndoenmdeeetoonsczakerhed, ndteorsaasnianmigngvaonfLiObVeAsPt.eding APR Tumhout STW BE 087714800 KCB 733000063571 IBA:BEAQ 7030093571 BIC: KAEDBES LOVAP NV- Kiaus-Michael Kuehnelaan 11 - B-2440 GEL Fax (014)58 17 06 infoglovap.be wiwlovapbe BI/RTAS1/0001 212 1) Analysisofthe physical changes at a temperature of230C "The product was heated at 230C during 2 hours. There was no loss in weight ascertained `and no physical changes were identified 2) Determinationofthe global migration limi "The global migration of components towards the simulators was determined in the following testing circumstances: distille1 d water 1 global migration (mg/d 1-- [isooctuan | ah | efx[Ts] ehanol95% | 4h [efx [| CONCLUSION: "The global migrationofthe elementsof the foil towards the simulators is lower than the maximum limit (10 mg/dm?) for materials meantto be exposed to food. The material is therefore appropriate to be exposed to food by normal and higher = (max. 230C). | 2) Peuter hnical Director D6 boaprnompionegvuersaustgatweonrdhene.eDnt uvearstagedmagbitt wnord0endgerebpropcicdaerdc,ebcte,tanainrvroalteecisgeanvgosa,ndzaonmdsetrodensczahed, deoreaseamomsirnigngvaonfLuOtVeAs.eding APR Tumhout BTW BE 087714803 WBC Bank TIS0GOSTI IBAN:BEAO7X0I009%71 BIC:KREDBESD