Document 2J9JgBOJK10zKM4xKB6oZakOa

Engineering Material Specification Material N*m Specification Number SEALER, ENGINE AND CHASSIS - HEAVY 8EALER, ENGINE AND CHASSIS - MEDIUM SEALER, ENGINE AND CHASSIS - LIGHT Jlrl jt E / ESE-M4GU4-A ESE-M4G11S-A ESB-M4G11S-A 1. SCOPE The materials defined by these specifications are asbestos filled vegetable oil type sealers which will dry without becoming hard and brittle and are resistant to oil, water, and engine coolant solutions. 2. APPLICATION These specifications were released originally for materials used for sealing studs, plugs, gaskets, and joints in the engine and chassis assemblies to prevent leakage of lubricant or coolant. They are applied by flowing, dipping, brushing, or roll-coating. 3. REQUIREMENTS 3.1 VISCOSITY, s (FLTM BU 4-1. 4 hole disc) As Received Aged, max ESE-M4G114-A, 250 g load ESE-M4G115-A, 100 g load ESE-M4G116-A, 100 g load 45-55 20-25 10-15 100 60 35 3.2 SOLIDS, 9b min (2 0.5 g sample, heat at 102 * 3C in a mechanical convection oven for 3 h) ESE-M4G114-A ESE-M4G115-A ESE-M4G116-A 3.3 FLASH POINT, min (ASTM D 1310) 80 70 65 46C 3.4 WEIGHT PER VOLUME (ASTM D El6) 8-9 lb/gal (0.96 - 1.08 kg.'L) The weight tolerance for any one supplier sht.1) be f'tf^lb/ga) (0.02 kg/L) based on the recorded weight of his original approved production sanpi*. 3.5 QUALITY Shall be a smooth homogeneous mixture free from foreign materials and properties detrimental to normal production use. R o o l lV>-> Oat* P*ra. No. j-y , /r[ ! 1963 0E 09 * ---M---c--t-r---i-e--a--t-e--d---a--n-d---R---e--t-v-o--e--d---Released E7-5756 Revisions rr.-f,rtf *? ' - --> Page J_ ot _2_