Document 15QdnBgZqLDZ8bmpN7X5ewoka

TO: SPECIFICATION DATE: Novenber 4, 1970 ISSUED BY: CONSTRUCTION MATERIALS PROCESS AND QUALITY CONTROL DEPARTMENT (Toledo) SUBJECT: Specification Revision RTF. Purchase Acceptance Standard - PAS.2.1.43 - Regular Slotted Printed CartonB and Accessory Materials for Shipping Kaylo Beveled Lag c Kaylo Block The attached subject PAS has been revised as follows: 1. Revised carton artwork. Please cancel the 1/20/67 issue of this specification and replace with the attached. ( II Kaylo' A-277 Handle with care A-260 {-ty-4" COHCr") CAUTION-- PRODUCT CONTAINS ASK5TOS FIKII INHALATION or BUST IN CXCISStVf OUANTTTKS orovu long pcriodi timc may m maij#ul. AVOfO AHATHINC BUST. IF ADfOUATf MNIMTION IS NOT K)!U(, WEAI If SHRATOtl ATPfOrtD IV T> U. S. BJKAU OF MINIS fOi NCUMOCONIOSIS PRODUCING OUST. A-2/o-/ (v'*2V) A-23o S" 1 In order to eliminate possible deviations from corporate Identity, printing dies totould pe ordered from The Pannier Corporation. 207 Sandusky Street, Pittsburgh. Pennsylvania 15212. Specify art element number and the length (example: A230, 13" long). II the printing dws are to be ordertd elsewhere, a glossy print of tha original art may be obtained from Pannier. For A-230 logotype 10" long end over, the PUllMliieiHuM dial! maature 2K" long. For A-230 logotypt 8" long and under, the measurement shall be equal to the distance from the left edge of the totter "L" to the right edge of tha totter "S" in FIBERGLAS (tee cbove print of logo) and diell be madabia whan printed. These dimensions pertain to carton printing only. Art elements printed to match Black ink and PMS *2008 Red Ink. GeNS-C9RMiN0 FIKRGLA8 CORPORATION. TOLEDO. OHIO 4K0! PAS. 2.1.43