Document 150QnQR79wYpxGEYbZER1dMRd

DownloadSearchable PDFRandom document
rv. January 10, 1977 Supersedes Formula C-976 Dated: 7/21/7.6 CKICAGO, ILLINOIS, PLANT FORMULA READY MU JOINT COMPOUND C-976 (HAND TOOLS) DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, `-- topping, and texturing. FORMULA Raw Material -/Water Nalco -/ Elvacc EP-200 Filler C-970 Function f Percent Solvent Anti-foaming agent Adhesive Filler -- .1 6.4 93.5 Lbs/Batch 103 8.00 (125 gals. )* 2.00 134.00 <15.0 gals.) 1950.00 100.0. 3124.00** *Approximately 56.5 lbs/100 lbs. of active ingredients (this may-vary 8 gallons per batch. -/ **0ne batch yields 5 o 1 five gallon pail Ready Mix Joint compound at 62 lbs/pail. ,, WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (560 t 20) For machine tools add 10 gallons H20* (400 - 20) WORKING PROPERTIES Spe cifications - Refer to Plant Testing Procedure Ho. 33. Compound shall be plastic, buttery working and' free of any coarse, gritty or undispersed Srticles. Material shall be free from lumps e to incomplete mixing. BONDING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90?S fiber tear when delaminated. CRACK RESISTANCE Specifications - Refer to Plant Testing Procedure No* 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR -- White Dried compound shall match color of standard sample. WNG * gvp -/ denotes change Lehnert 10.3.01-66 SGP 0018521 T>1/0. 17 i iq 77 *ri7=. . Supersedes formula C--976 Dated 3/22/7$ 7/7 //7 CHICAGO, ILLINOIS, PLANT FORMULA HEADY MIX JOINT COMPOUND C-976 (HAND TOOLS) DESCRIPTION OF PRODUCT - Y/hifce Ready Mix Joint Compound used for taping, . * topping, and texturing. FORMULA Raw Material Water Nalco -/ Elvace i673 . Filler C-970 rLo0 Function Percent Lbs/Batch " pc Solvent' -- tc-$$H&Q-rOG (230 gals.)* Anti-foaming agent .1 2.00 Adhesive 6.4 134.00 (15.0 gal*.) Filler 93.5 1950.00 100.0. -3-1-6 6;00** 2/T Y ^Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary i 8 gallons per batch. ' -- / **one batch yields 53c 1 five gallon pail Ready Mix joint compound at 6.2, lbs/pail. WORKING CONSISTENCY Specifications for Paste - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 i 20) For machine tools add 10 gallons H2O. (400 20) WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. . Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. BONDING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 35* After compound has dried, tape shall show at least 90# fiber tear when delaminated. CRACK RESISTANCE Specifications - Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the. thinner half of the wedge. COLOR - White Dried compound shall match color of standard sample. WNG:gvp -/ denotes change SGP 0018538 7r'.W. 17. /.f 77 Sujtcv^sFormula C-979' CHICAGO, ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-979 (HAND TOOLS). . DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping *- and texturing. (Special asbestos free formula for all one gallon ready mix and selective five gallon shipment only.) FOEMiLA Raw Material Function KM Spec Percent Lba/Batch Filler C-978 Elvace 1875' c<$> taa ' Nalco 71D-5 Acrysol ASE-60 / *tfater Filler Adhesive Defoamer .Thickener Solvent -- 185 125 147 92.8 6.5 .2 .5 -- 1950.0 136.0 (15.25 gals.) 4.0 10.0 /33 f/OV Lfrg&rO (Ktf-gals.) 100.0 3228r0** 320*{ ^Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch. ** One batch yields 51+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. SPECIAL MIXING INSTRUCTIONS - Blend Ingredients in following order: 1) Water 2) Elvace <"> \oo 3) Nalco 4) Filler C-978 5) Mix until filler is dispersed 6) Add Acrysol ASE-60 7) Mix until Ready Mix is smooth - pumping viscosity should be 480 + 20 to allow for 24 hour viscosity build of 100 pts. WORKING CONSISTENCY Specifications for Paste Refer to Plant Testing ProcedureNo. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender: (580 + 20) For Machine tools add 7 gallons HgO (400 + 20) pH Minimum - 9.0 Maximum - 10.0 (24 hrs.) WORKING PROPERTIES - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing. WNGigvp Continued on Page 2... Lehnert 10.3.01-67 SGP 0018540 K lc