Document 10XM6qvOjKVQxVOb5Rz349Q6Z
PURCfeASfidPRDER
MODIffCpION
FORM FA-POMP-t (33221601
NEWPwPf NEWS SHIPBUILDING AND DRY DOCK NEWPORT NEWS, VIRGINIA
O.B.R.P. CD YEsH--1 NO
PANY VENDO
DER NO.
MODIFICATION NO. 3 TO PURCHASE ORDER NUMBER
85760
H-?573-635a-20
IMPORTANT See Note Below
The Whiton Machine Company New London, Connecticut
DATE OF ISSUE (BY PA)
January 28, 1964
INSPECTION BY
Owners
INSPECTION AT
Destination
PLEASE MODIFY THIS PURCHASE ORDER AS SPECIFIED HEREIN. ALL TERMS AND CONDITIONS OF THE ORIGINAL
PURCHASE ORDER AND APPENDICES ATTACHED THERETO REMAIN IN EFFECT UNLESS SPECIFICALLY
ALTERED BY A MODIFICATION.
ACKNOWLEDGE RECEIPT OF THIS MODIFICATION IMMEDIATELY, ADVISING ITS EFFECT ON PRICE AND DELIVERY.
L. B. PETERSON, MANAGER OF PURCHASES (OR) W. K. WILLS. PURCHASING AGENT
,,
1|
ITEM QUANTITY
DESCRIPTION
UNIT PRICE
TOTAL
1
22 b
TURBINES: STEAM, for Deepwell Solvent Pumps GROUP'635-3 - For Humble Oil and
. Refining Co. Tankers
Change the "Title" to read as shown above.
On Sheet 1, at top of the Quantity Column, add: 2 Ships.
Increase quantity from 2 to h.
Change item 2 to read as follows:
Outfits of special tools in accordance with Appendix Section V, one outfit per ship.
Increase quantity from 6 to .
This modification exercises the option in the basic purchase order concerning purchase for a second vessel.
..y" Add shipment for second shlpset of material July 2, 1964.
Increase total price
ARB 1/21 WJH-dm FBB*
---------- ----- "I----- --
SHEET NO. 1 OF SHEETS
MODIFICATION
This Number MUST Appear On All Correspondence, Invoices, Packages And Shipping Papers.
MODIFICATION NO. TO3 PUUFRCHASE J3R DER NUUMMBER
H-573-635A-20
EXX-MOR-002452
PURCHASE fcRDER MODlnCATION
FORM PA-POMP-1 (33221601
NEWPORT NEWS SHIPBUILDING AND DRY DOCK NEWPORT NEWS, VIRGINIA
O.B.R.P. i--iv.a NO
PANY VENDOR ORDER NO.
MODIFICATION NO. TO PURCHASE ORDffi NUMBER
85760
H-573-635A-20
IMPORTANT -
See Note Below
DATE OF ISSUE (BY PA)
TO:
The New
Whlton Machine Company London, Connecticut
January 22. 1964
inspection by
Owners
INSPECTION AT
Destination
PLEASE MODIFY THIS PURCHASE ORDER AS SPECIFIED HEREIN. ALL TERMS AND CONDITIONS OF THE ORIGINAL
PURCHASE ORDER AND APPENDICES ATTACHED THERETO REMAIN IN EFFECT UNLESS SPECIFICALLY
ALTERED BY A MODIFICATION.
ACKNOWLEDGE RECEIPT OF THIS MODIFICATION IMMEDIATELY, ADVISING ITS EFFECT ON PRICE AND DELIVERY.
L. B. PETERSON, MANAGER OF PURCHASES tOR) W. K. WILLS, PURCHASING AGENT
ITEM QUANTITY
DESCRIPTION
UNIT PRICE
TOTAL
URBINHS: STEAM* For Deepwell Solvent Pumps -
Apd the following:
A] connection shall be provided for determining steam chest pressure. The connection is to be
1/2" extra heavy I.P.S. carbon steel nipple long with plain end.
Advise effect on price at once.
ARB
1/8 WJlI-br FBB*
SHEET NO. 1 Of SHEETS
MODIFICATION
This Number MUST Appiar On All Correspondence, Invoices, Packages And Shipping Papers,
MODIFICATION NO, p TO PURCHASE ORDEfc NUMBER
H-573-635A-20
EXX-MOR-002453
PURCHASE ORDER AND APPENDICES ATTACHED THERETO REMAIN IN EFFECT UNLESS SPECIFICALLY ALTERED BY A MODIFICATION. ACKNOWLEDGE RECEIPT OF THIS MODIFICATION IMMEDIATELY, ADVISING ITS EFFECT ON PRICE AND DELIVERY.
L. B. PETERSON, MANAGER OF PURCHASES <OR) W. K. WILLS, PURCHASING AGENT
ITEM QUANTITY
DESCRIPTION
UNIT PRICE
TOTAL
TURBINES: STEAM, For Deepwell Solvent Pumps -
ARB WJH-HMp-oc FBB*
JTT
SHG JLW
HJC GWB TEL RLS
9/23 10/25
On Sheet 2 delete fourth line from bottom which reads: "High pump discharge trip (set at 150 psig)."
On Sheet 3 delete first line which reads:
"Fixed vibrating reed tachometer.11
Add the following: Note: The Shipyard will furnish a remote mountejl
mechanical tachometer.
On Sheet 4 delete the last sentence In the second paragraph which reads:
'The same ---- button stations."
SHEET NO. 1 OFT SHEETS
MODIFICATION
This Number MUST Ap^iar On All Correspondence, Invoices, Packages And Shipping Papers.
MODIFICATION NO.
TO PURCHASE ORDER-NUMBER
H-573-S35A-20
EXX-MOR-002454
PlierKASE tiRfiPR
DISTRIBUTION COPY
PORM PA-POD-1 (3322100)
NEW&T NEWS SHIPBUILDING AND DRY DOCI^MPANY
LEAD YARD ORDER NO.
o.b.r.p. CJyePD NO
VENDOR ORDER NO.
N.N. VENDOR NO. PURCHASE ORDER NUMBER
VENDOR
The Whifcon Machine Company New London, Connecticut
857&0
YD. REQN. NO.
..... Hr.5.75r.655A-$p..................
IMPORTANTSee Note Below
eMRjWlSr T963
--
applicable
APPENDIX
INSPECTION BY
Owner
INSPECTION AT
!
Destination ^ See Below
1
BUYER Tl*CEmEnY doMlib&itY ---------------------nssuHT----------------------- ' DATE SHIPMENT WANTED March 2, 1964
DATE SHIPMENT PROMISED
. F.O.B.
New London,Conn.
TERMS
/2 of 1^-10 Days
CHARGE NOw
635
ITEM QUANTITY
. DESCRIPTION
IDENT. NO. 439,,T
r ---- ----r------------- -----------1--------------1----------- 1
1--------------1------------ 1
--------- 1---------------
UNIT PRICE
STOP NO. TOTAL PRICE
See notes on last sheeto
TURBINES: STEAMj for Deepwell Solvent Pumps -
GROUP 635=3 - For Humble Oil and - Refining Company Tanker
One print of our drawing No <, 198350 Rev0 5 forms part of this purchase order0
1 2 Vertical marine turbines, Whiton type BKSV0
2 1 Outfit pf special tools in accordance with Appendix B, Section Vo
3 See
Drawings
Appendj X
i
3~a See
Drawings for preliminary and/or foundation
Append" .x information, ln,,ac cordance with Appendix B,
Section IIIAp. '
3-D See
Drawings for approval, in accordance with
Append^ x Appendix B, Section IIIBo
PURCHASE ORDER NO.
...H-573-655A-2Q.................
SHEET I OF -6 SHEETS This Number MUST Appear On All Correspondence, Invoices, Packages
DISTRIBUTION COPY And Shipping Paters,_______________
\
EXX-MOR-002455
FORM PA-POD-2 (3322102) ITEM I QUANTITY
Newport news shipbuilding and dry dock
STEAM, for Deepwell Solvent Pumps
DESCRIPTION
PANY
I PURCHASE ORDER NO.
RECORDS
A 6 Instruction books in accordance with Appendix B, Section IV,,
The turbines are to be for non-condensing
operation and are to be arranged for direct drive of* the pumps through a rigid coupling0
The turbines are to be furnished with a type
"P" base for mounting to the pump0
.
.
'
' ' '. ;
The turbine half couplings and bases \for
mounting to the pumps will be provided, by
the pump manufacturer, Bingham Pump Co\
i
The necessary boring information! etc0 for
the shaft couplings and drawings of the turbine base are to be forwarded to the pump vendor with copy to Newport News Shipbuilding and Dry
Dock Company as soon as available0 This is to be accomplished in the most expeditious manner possible
The turbines shall be equipped with the follow
ing; :
. . '
`.
Complete self contained lubrication System
(Upper bearing grease lubricated ball type,
lower bearing oil lubricated roller thrust
type* ) .
. v. . . "
Overspeed trip (set at not over 115# rated speed)
Constant speed governor (adjustable to 80# speed)
Throttle valve ' ' J
Steam Strainer
High bapk pressure trip (set at 25 psig)
High pump discharge trip (set at 150 psig)
Sentinel valve on casing
.
Emergency trip suitable for operation by shipyard furnished push button stations
SHEET NO.
DISTRIBUTION COPY
^S'VSS.BmilfeO
\
EXX-MOR-002456
V*
NEWPOlPPIlEWS SHIPBUILDING AND DRY DOCK
DISTRIBUTtOtjpfPF^s
FORM PA-POD-2 (3322102)
ITEM QUANTITY
STEAM, for Deepwell Solvent; Pumps
DESCRIPTION
AMY
PURCHASE ORDER NO.
RECORDS
Fixed vibrating reed tachometer
The turbines are to he suitable for carrying the pump down thrust of 5500 pounds0
Each turbine is to be capable of delivering 200 HoPo at not over 1760 RoPoMo
The guaranteed water rate at the above rating shall not exceed 66*5 lbe/HP-HR when supplied
with desuperheated steam at 300 psig and 500oF,, total temperature at the turbine inlet flange aid operating at 10 psig back pressurea
Each turbine shall normally operate with steam /
at 280 psig and 498Fe total temperature with
a back pressure of 10 pSigo
' . /
The turbine must be of ample strength to with stand steam at 330 pslgo
All exposed turbine and governor parts are to
be suitable for Installation on the open deck where they will be subject to salt water
The lubrication system is to assure adequate lubrication at all speeds up to and including the overspeed trip settingo
The vendor is to advise the shipyard immediately the amount of Cooling water required The cooling medium provided will be salt water <> Materials in contact with the cooling medium
must be suitable for use with salt water and designed to withstand a maximum pressure of 80 psig
Grease fittings are to be suitable for use with
the Alemlte grease gun and fitted with a vent as necessary to prevent over greasing0
Rotation is to be clockwise when viewing the turbine from shaft coupling end,,
/
SHEET NO. 3 DISTRIBUTION COPY
Vfc-
PURCHASE ORDER NO.
H-573-635A-20
EXX-MOR-002457
ITEM QUANTITY
NEWPO^EWS SHIPBUILDING AND DRY DOCK
STEAM* for Deepwell Solvent Pumps
DESCRIPTION
ANY
PURCHASE ORDER NO.
RECORDS
Due to the self-priming feature of the deep well pumps (Bingham Pump Co*) the turbines will be subjected to rapidly fluxuating load conditions and the constant speed governor system must be suitable to prevent undue acceleration or trip out of the turbine due to overspeedo
All solenoids and switches are to be explosion proofo The solenoids must be suitable to be continuously energised during operation and arranged, to trip the turbine when de-energized The same solenoid employed for the high pump discharge trip is to be used with the remote emergency trip push button stations 0
Electrical equipment is to be suitable for 115 volt, 60 cycle alternating currente
The turbines shall be tested by the manufacture^* for satisfactory operation, alignment, etc*, Further tests will be conducted at the Shipyard to insure satisfactory operation with the pumps after installation on board the shlp0
After completion of shop tests at Vendor's plan any packing liable to cause corrosion by remaining in place during shipping or storage of the equip ment is to be removed, stowed separately, and; care fully marked so as to assist in its reinstallation Hods or shafts, in way of the packing, are to b<> properly protected from corrosion during shipment or storage of the equipments
Lagging clips shall be welded or otherwise attached to each unit, .in proper location, to permit attach ment of insulations They are to be located close to bolted joint8 where fixed insulation will terminatec The joint will be covered with portable pads
Connections are to be ASA standard in accordance with the applicable'pressure ratings The raised faces of flanges over 150 pounds working pressure are to be machined In accordance with drawing number 198350 Rev0 50
SHEET NO. 4
DISTRIBUTION COPY
DISTRIBUT^|*iB^O^%;
PORM PA-POD-2 (3322102)
ITEM QUANTITY
NEWPOHhrNEWS SHIPBUILDING AND DRY DOCK OMPANY
PURCHASE ORDER NO.
STEAM, for Deepwell Solvent Pimps
H-575-635A~gQ
DESCRIPTION
RECORDS
Connections for: shipbuilders piping shall be sup. able for withstanding loads Imposed upon them dbie to normal expansion and contraction of the plpllng attached thereto in accordance with good marine! practice o . . ; . . :
All turbine lagging will be furnished by the shipyard, but all attached gland sealing ana
lubrication piping is to be furnished with the turbines.
This equipment must meet all the applicable requirements of Appendix B-5730
The material furnished for each item shall be
substantially tagged or clearly marked for identification with the item and purchase order
number thereof,, For Identification purposes
during Installation, the following electrical components are to have the following symbol
numbers plainly marked thereon, or have a durab. e
tag bearing these numbers securely attached thereto:
Solenoid - 5o94 Pressure Switch - 5095
Applicable Appendices
.
A-573 B-575 Revc A, dated June >6, 1963
Vendors plans were due In Newport News prior to the placement of this order. Your prompt forward
ing of plans will be appreciated0
Manufacturing Authorization: Release to manu^ facture is withheld pending approval of vendors/ drawings Any work done prior to
approval of the drawings and authorization to proceed with work, except by specific
written Instructions from this Company, will be at the vendor1s own risk. Release to manufacture will be given by a letter.
SHEET NO.
DISTRIBUTION COPY
4t* NEWPOF IEWS SHIPBUILDING AND DRY DOCK
DISTRIBUJ^-$aY STEAM, for Deepwell Solvent Pumps
FORM PA-POD-2 (3322102)________________________________________________
..
ITEM QUANTITY
DESCRIPTION
ANY
PURCHASE ORDER NO.
H-573-635A-20
RECORDS
Option: In the event the Owners, by February 15, 1964, Contract with the Purchaser for the con- ' struetion,'of a. tanker essentially duplicating that for which the equipment specified herein is to be used, the Vendor agrees to furnish to the Purchaser equipment duplicating that specified herein at a price of:
In the event the Owners, within eighteen months, contract with the Purchaser for the construction of a third and/or fourth vessel of the same de sign, the Vendor agrees to furnish to the pur chaser a third and/or fourth set of equipment duplicating that specified herein at the price of the sefcond Bhipset of equipment escalated in accordance with The Bureau of Labor Statistics Index for Metal and Metal Products, but not to exceed 10^.
Total Price less Item 2 :
\
`1
Advise Increase for addition of tachometer and decrease for elimination of spares.
ARB
WJH- BMP/Jf FBB*j
JTT
SHG JLW
HJC GWB TEL RLS 9/23
FOR NEWPORT NEWS INFORMATION ONLY:
Sehdc Reqd0 Date 7-1-63 Wanted 3-25-64
This order should have been placed by 7-1-63
in carder to meet the "required in yard" date,
when using average lead timeo
'
SHEET NO. 6
DISTRIBUTION COPY
'Ur '
"
PURCHASE ORDER NO.
H-573-635A-20
\
EXX-MOR-002460