Document 0g2ynBq57JL9X91mJ9ban4JVO

Troubleshooting t Reeding the Binary Codes 4) To raise the acceptance number (loosen the calibration), press the start button once. To lower the acceptance number (tighten the calibration), press the calibration burton once.The acceptance number will change in increments of two. After rais ing or lowering (you'll see the binary code change), hit the reset button to save the change. 5) Once you have raised or lowered the acceptance number by two and hit reset, test the machine to ensure that the problem has been solved. You may need to repeat the procedure once or twice to fully solve the problem. Ifyou have any difficulty or questions about executing this procedure, cal) Pro-Cut. IS Reading the Binary Codes The illustration above shows binary values for each light. For example, when the 2nd and 4th lights are blinking, the total binary value is 10 (2 for light #2, plus 8 for light #4). PBD-CUTl 80D-B43-C61B Produced by Ford Motor Company U. MOTO 000073