Document 0KBbzo61vQBXyymyjkJzykBJ

Air System Equipment gSSSS?" SmUcts ACME INDUSTRIES, INC. Jackson, Michigan Representatives in Principal Cities CONTINUOUSLY SERVING THE REFRIGERATION INDUSTRY SINCE 1919 FREON CONDENSERS AMMONIA CONDENSERS Shell and Tube type for use with Am monia, Freon or other Refrigerants. Standard or special designs to meet vary ing water temperatures available and condensing temperatures desired. EVAPORATIVE CONDENSERS All prime surface for Freon or Ammonia Refrigerants--Heavy Gage Sheet Metal Casings, especially processed for Maxi mum Resistance to Rust and Corrosion. Capacities to 100 tons. All fabricated steel parts are now hot-dip galvanized after fabrication. DRY-EX COOLERS Refrigerant in Tubes, Solution baffled through shell. For cooling water, brine, Glycols or Alcohols by direct expansion of refrigerant. HEAT INTERCHANGERS Shell and coil units for small capacities, shell and tube units for large installa tions. 16 standard models from one ton to 180 tons capacity. Air System Equipment Heat Transfer Products The Patterson-Kelley Company, Inc. 101 Burson Street East Stroudsburg, Pa. Offices or Representatives in Other Principal Cities New York Office, 101 Park Avenue, Zone 17 PATTERSON PRODUCTS for the Heating Field Hot Water Storage Heaters Instantaneous Heaters Combination Heaters Heat Reclaimers Heat Exchangers Condensers Convertors Fuel Oil Heaters PATTERSON PRODUCTS for Air Conditioning and Refrigeration Freon Coolers Water, Brine and other Coolers Condensers Slug Eliminators Balance Loaders All of the above units are in the class of "heat transfer" equipment and it is in this class that The Patterson-Kelley Company has been specializing since 1880. Its products are carefully engineered and constructed of properly selected materials according to the most modern manufacturing methods. Literature describing any product will be sent bn request. If you have any requirement involving any type of heat transfer equipment, let us know. Our engineers will be glad to study your problem and recommend the proper type and size of unit. BLO-COLD INDUSTRIAL UNIT COOLERS Blo-Cold Models are available for either medium temperature or low-temperature applications. All fabricated steel parts are hot-dip galvanized after fabrication. PIPE COILS Fabricated in all shapes and sizes from Yl in. IPS to 2 in. IPS. in accordance with customer's specifications. Acme Industries, Inc. also manufacture Flooded Water and Brine Coolers. Oil Separators, Receivers and Fin Coils. WRITE FOR CATALOG ON ANY PRODUCT . 1166 Patterson Freon Cooler--Dry Expansion Type Note the freon chamber machined from solid billet of rolled carbon steel with sepa rating partitions welded in place. There are no exposed welds. New Bulletin on request. 1167