Document 06wQOVZeO3EME8aQMwjJw2Epk

September 16, 1968 NFW FORMULA ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-976 (MACHINE TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling comerbead and spotting nails. FORMULA Raw Material Water Filler C-971 Poly Vinyl Acetate Emulsion ; Benzoflex 50 Function Solvent Body ' '; Adhesive Plasticizer R.M. Spec. 185 183 Percent 91.44 8.04 0.52 100.00 Lbs./Batch 433.0 (52 gal.)* 700.0 ; 61.5 4.0 1198.5 ;** *Approximately 56.5 lbs./lOO lbs. of active ingredients (this may vary + 5 gallons per batch). ' **One batch yields 3Cr(+) " 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. * WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. ) Specifications for Paste: If paste is not proper working consistency, a^maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender - 385 + /$ WORKING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Material should be free of lumps due to incomplete mixing. BONDING PROPERTIES Specifications; . Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE Specifications: Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications: White . Dried compound shall match color of'standard sample. RRB:kgc SGP 0017897 v. September 26, 1968 Supersedes Formula No. TEX-976 Dated 9/16/68 ACME, TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX- 976 (MACHINE TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting nails. FORMULA Raw Material Water Filler C-971 Polyvinyl Ace- tate Emulsion Benzoflex 50 Function Solvent Body Adhesive Plasticizer R.M. Spec. - "* 185 183 Percent - 91.44 8.04 0.52 100.00 Lbs./Batch 433.0 (52 gal.)* 700.0 61.5 4.0 1198.5** *Approximately 56.5 lbs./lOO lbs. of active ingredients (thid may vary + / 2 gallons per batch). / **One batch yields 18 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender - 385 + =2 / WORKING PROPERTIES Specifications; BONDING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Material should be free of lumps due to incomplete mixing. Refer to Plant Testing Procedure No. 35. After compound has drier*, tape shall show at least 7570 fiber tear when delaminated. CRACK RESISTANCE Specifications Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications White Dried compound shall match color of standard sample. -/ Denotes change in this reissue. RlTR'VVf SGP 0017898 November 4, 1968 Supersedes Formula No. TEX-976 Dated 9/26/68 ACME, TEXAS PLANT FORMULA READY MIX JOINT COMPOUND TEX-976 (MACHINE TOOLS) (READY MIX "X") DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering . tape, filling cornerbead and spotting nails. FORMULA Raw Material Water Filler TEX-970 Eivacet 81-900 Benzoflex 50 Function Solvent Body Adhesive Plasticizer R.M. Spec. - - 185 183 Percent - 91.44 8.04 * 0.52 100.00 Lbs./Batch 433.0 (52 gal.)* 700.0 61.5 4.0 1198.5** ^'Approximately 56.5 lbs./lOO lbs. of active ingredients (this may vary + 2 gallons per batch). **One batch yields 18 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail. WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust. Brabender - 385 /.5 WORKING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Material should be free of lumps due to incomplete mixing. BONDING PROPERTIES Specifications: Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE Specifications: Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications White Dried compound shall match color of standard sample. -/ Dv-..otes change in this reissue. SGP 0017899 July 9, 1970 NEW FORMULA ACME, TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX- 976 (MACHINE TOOLS') DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling cornerbeads and spotting nailheads. FORMULA Rav: >'atcrial Naico 71-D5 Water UCAR WC 131 Ethylene Glycol Filler TEX-975 WORKING CONSISTENCY: Specifications: Brabender Viscosity: WORKING PROPERTIES: Specifications BONDING PROPERTIES: Specifications CRACK RESISTANCE: Specifications COLOR: Specifications Function R.M.Spec Percent Lbs/Batch Anti-foaming agent Solvent Adhesive Wet edge extender - - - 185 mt .07 - 7.25 0.5 92.18 100.00 0.5 432.5 55.0 4.0 700.0 1192.0 - Refer to-Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust. 385 +-4# - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Materials should be free of lumps caused by incomplete mixing. Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated. Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner, half of the wedge. White Dried compound sh&ll match color of standard sample. EDO:bek SGP 0017900 September 1, 1970 Supersedes Formula No. TEX-976 Dated 7/9/70 ACME. TEXAS PLANT FORMULA READY MIX JOINT COMPOUND NO. TEX-976 (MACHINE TOOLS) DESCRIPTION OF PRODUCT: / FORMULA; Raw Material Nalco 71-D5 Water UCAR WC 131 Ethylene Glycol Filler TEX-970 - White Ready Mix Joint Compound used for taping, covering tape, filling cornerbeads and spotting nailheads. Function Anti-Foaming agent Solvent Adhesive Wet edge extender - R.M.Spec. _ m 185 - Percent .07 5.38 .50 94.05 100.00 Lbs/Batch 0.5 432.5 40.0 '4.0 700.0 1177.0 WORKING CONSISTENCY; Specifications; Brabender Viscosity: - Refer to Plant Testing Procedure No. 32. If paste is not of proper working consistency, a maximum of 5 cc of water per 150 grams of paste may be added to adjust. - 385 + 2% I WORKING PROPERTIES; Specifications: Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty' or undispersed particles. Materials should be free of lumps caused by incomplete mixing. BONDING PROPERTIES; Specifications: Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated. CRACK RESISTANCE; Specifications: Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR: Specifications: White Dried compound shall match color of standard sample. -/ Denotes change in this reissue. ED0:dek SGP 0017901 July 6, 1972 TEX-976 NEW FORMULA ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX -976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and .TEX-971. FORMULA Raw Material Function R.M. Spec. Percent Lbs/Batch Dowicil 100 Fungicide 193 .15 12.00 Polyvinyl Alcohol 3o-3 0 Adhesive 162 .60 48.00 Gendriv 492S Water retention aid 11 .50 40.00 C Mica Asbestos (SG-210) Anti-cracking agent Bulking agent 13 7.00 3.75 560.00 300.00 Land Plaster Filler - 88.00 7040.00 WORKING CONSISTENCY Specifications 100.00 8000.00 - Refer to Plant Testing Procedure No. 32. Maximum Minimum Av< rage I 62 58 60 WORKING PROPERTIES - Refer to Plant Testing Procedure No. 33. ( Specifications - Filler shall be very heavily bodied and possess N.-. fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications - White Dried Compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. EDO:elz 7 &F<f S G- It O 7-/0-7^ 4o.r S3- Y J A - 6 43'- 7 "3 f?. 7P Ao. /<}/O . (r 5. 3 SGP 0017902 July 11, 1973 Supersedes TEX-976 Dated 7/6/72 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX -976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and TEX-971. FORMULA Raw Material Function R.M. Spec. Percent Lbs/Batch Dowicil 75 Polyvinyl Alcohol Gendriv 492S Mica Asbestos (SG-210) Land Plaster Fungicide Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 193 162 11 13 - .20 .60 .50 7.00 3.75 87.95 16.00 48.00 40.00 560.00 300.00 7036.00 WORKING CONSISTENCY Specifications 100 00 8000.00 - Refer to Plant Testing Procedure No. 32. Maximum Minimum : Average 62 58 60 WORKING PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications White Dried Compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all thj specifications required of Ready Mix Joint Compoun - Formula Nc. TEX-971. EDO:elz -/ denotes change SGP 0017903 February 27, 1975 Supersedes TEX-976 Dated 7/11/73 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and TEX-971. / FORMULA Raw Material Function RM Spec Percent Lbs/Batch Vancide Dowicil 75 Gelvatol 3000 Gendriv 492S. Mica Asbestos SG-210 Land Plaster Preservative Preservative Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 126 193 162 11 . -- 13 ---- .025 .175 .60 .50 7.00 3.75 37.95 2.00 14.00 43.00 40.00 560.00 300.00 7036.00 100.00 3000.00 WORKING CONSISTENCY Specifications: i* - Refer to Plant Testing Procedure No. 32. Maximum Minimum v Average 62 53 ; 1 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR - White Specifications: Dried compound shall match color of standard sample. , !`J NOTE: A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day:or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No.; TEX-971. -/ denotes change WNG:j g SGP 0017904 March 31, 1975 Supersedes TEX-976 Dated 2/27/75 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 (FILLER X) DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and TEX-971. FORMULA Raw Maternal i' ! 1.. Dowicil 75 Gelvatol 6000 Gendriv 492S Mica Asbestos SG-210 Land Plaster Function RM Spec Percent Lbs/Batch Preservative Preservative Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 126 193 162 11 -- 13 -- .025 .175 .60 .50 7.00 3.75 37.95 2.00 14.00 43.00 40.00 560.00 300.00 7036.00 100.00 3000.00 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 53 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE; A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971* -/ denotes change WNG:elz SGP OOI7905 May 29, 1975' Supersedes TEX-976 Dated: 3/21/75 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 (FILLER X ) DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 -------------------------------- : and TEX-971. FORMULA Raw Material Vancide Dowicil 75 Gelvatol 6000 Gendriv 492S Mica Asbestos SG-210 Land Plaster Function RM Spec Percent Lbs/Batch Preservative Preservative Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 126 193 162 223 11- 13 ---- .025 .175 1.00 .50 6.25 3.75 SB. 30 2.00 14.00 BO. 00 40.00 500.00 300.00 7064.00 100.00 B000.00 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. -/ denotes change WNG:elz SGP 0017906 January 27, 1976 Supersedes TEX-976 Dated: 5/29/75 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and TEX-971. FORMULA -/ --------------Raw Material Sorbitol (Powdered) Vancide Dowicil 75 Gelvatol 6000 Gendriv 492S Mica Asbestos SG-210 Land Plaster Function RM Spec Borax Stabilizer Preservative _ 126 Preservative 193 Adhesive 162 Water retention aid 223 Anti-cracking agent 11 Bulking agent Filler 13 -- Percent .400 .025 .175 1.00 . 50' 6.25 3.75 67.9 100.00 Lbs/Batch 32.00 3 2.00 .50 14.00 60.00 20 40.00 10 500.00 licr 300.00 7032.00 2 oc>t> 6000.00 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 56 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. -/ denotes change WNG:elz SGP 0017907 April 22, 1976 Supersedes TEX-976 Dated: 1/27/76 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and TEX-971. FORMULA Raw Material / Sorbitol (Powdered) Vancide Dowicil 75 Gelvatol 6000 / Galactosol 413-W Mica Asbestos SG-210 / Land Plaster Function RM Spec Borax Stabilizer Preservative Preservative Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 126 193 162 11 13 ---- Percent . 300 .025 .175 1.00 .50' 6.25 3.75 88 .00 Lbs/Batch 24.00 2.00 14.00 SO. 00 40.00 500.00 300.00 704 0.00 100.00 S000.00 WORKING CONSISTENCY Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. -/ denotes change WNG:gvp SGP 0017908 f '? '6April- 22 Supersedes TEX-976 'Dated: 1-A27/76-" tj I ZZ. ! 7 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 and TEX-971. FORMULA Raw Material Sorbitol (Powdered) Vane4.de-- Dowxcil--75T Gelvatol 6000 Galactosol 413-W Mica Asbestos SG-210 Land Plaster Function RM Spec Percent Borax Stabilizer Preservative Preservative Adhesive Water retentiont aid Anti-cracking agent Bulking agent Filler _ i- . 300 .02-5 .W- 162 1.00 .50 11 6.25 13 3.75 --rp,|5 88 .00 Lbs/Batch 24.00 -2-rOQ 14-iQQ- f .r: SO. 00 L0.00 500.00 300.00 7O40tOO- ->j HP. 100.00 S000.00 WORKING CONSISTENCY Specifications: Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications: - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications: - White Dried compound shall match color of standard sample. NOTE: A wet mix f the filler shall be prepared according to Formula TEy>.-971'at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. -/ denotes change WNG:gvp SGP 0017909 November 24, 1976 Supersedes Formula TEX-976 Dated: 4/22/76 ACME, TEXAS PLANT FORMULA READY MIX FILLER TEX-976 (FILLER "X1') DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 & TEX-971. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Sorbitol (Powdered) / Troysan PMA-10 SEP Gelvatol 6000 Galactosol 413-W Mica Asbestos SG-210 / Land Plaster Borax Stabilizer Preservative Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 162 11 13 - .300 .100 1.000 .500 6.250 3.750 88.100 24-rOO M-eD 8.00 80.00 40.00 500.00 300.00 704 LOO 100.000 8000.00 WORKING CONSISTENCY Specifications: WORKING PROPERTIES Specifications: COLOR Specifications: - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. White Dried compound shall match color of standard sample, NOTE: A wet mix of the filler shall be prepared according to Formula EX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. -/ denotes change WNG/gvp SGP 0017910 December 14, 1976 Supersedes Formula TEX-976 Dated: 11/24/76 . ACME, TEXAS PLANT FORMULA READY MIX FILLER TEX-976 (FILLER "X") DESCRIPTION OF PRODUCT - Filler for Ready Mix Joint Compound TEX-970 & TEX-971. FORMULA Raw Material Function RM Spec Percent Lbs/Batch / Sorbitol (Powdered) Troysan PMA-10 SEP Gelvatol 6000 Galactosol 413-W Mica Asbestos SG- 210 / Land Plaster Borax Stabilizer Preservative Adhesive Water retention aid Anti-cracking agent Bulking agent Filler 162 11 13 - .100 .100 1.000 .500 6.250 3.750 88.300 8.00 8.00 80.00 40.00 500.00 300.00 7064.00 100.000 8000.00 WORKING CONSISTENCY Specifications WORKING PROPERTIES Specifications: COLOR Specifications: - Refer to Plant Testing Procedure No, 32. Maximum Minimum Average 62 58 60 - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. White Dried compound shall match color of st i.dard sample. NOTE: A wet mix of the filler shall be prepared according to F rmula TEX-971 at least twice a day or with every 6th or 7th batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula No. TEX-971. -/ denotes change WNG/gvp SGP 0017911 September 20, 1977 Formula TEX-976 NEW ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT - Filler for Memphis Ready Mix.Joint Compound TEX-977* For selected market trials and shipment to Memphis only. FORMULA Raw Material Function RM Spec Percent Lbs/Batch Galactosol 413-W Magnesium Oxide (Heavy) Attagel Mica pSO-h Land Plaster Sorbitol Gelvatol 6000 Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 3 11 162 . 500 .200 2.500 7.500 33.700 .100 . 500 40.0 16.0 200.0 600.0 7096.0 3.0 40.0 100.000 3000.0 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 53 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared nix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. HCF:jg SGP 0017912 January 17, 1978 Supersedes Filler Formula TEX-976 Dated: 8-31-77 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT -- Filler for Ready Mix Topping Compound TEX-973 and regular Ready Mix TEX-977. FORMULA Saw Material Function RM Spec Percent Lbs/Batch Galactosol 413-W Magnesium Oxide (Heavy) Attagel Mica pSO-h Land Plaster Sorbitol Gelvatol 6000 Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 11 162 .500 .200 2.500 7.500 8.700 .100 .500 40.0 16.0 200.0 600.0 7096.0 .0 40.0 100.000 000.0 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 5 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. C0K)R Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. HCF:jr SGP 0017913 February 23, 1978 Supersedes Filler Formula TEX-976 Dated: I/17/78 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT -- Filler for Ready Mix Topping Compound TEX-973 and regular Ready Mix TEX-977. FORMULA Raw Material Aqual'il K-8 Galactosol 413-W Magnesium Oxide (Heavy) Attagel Mica p80-h Land Plaster Sorbitol Gelvatol 6000 Function RM Spec Body Builder Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 8 11 162 Percent 5.000 .500 .200 2.500 3.000 88.200 .100 .500 Lbs/Batc W 16.c 200. C 240. C 7056.C 8.C 40. C - 100.000 8000.C WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 5S 60 WORKING PROPERTIES S pec'i fi cations - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and posses fair plasticity. It shall be free of any coar gritty or undispersed particles. COK)R Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. HCF:jr SGP 0017914 February 23, 197$ Supersedes Filler Formula TEX-976 Dated: I/17/78 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT -- Filler for Ready Mix Topping Compound TEX-973 and regular Ready Mix TEX-977. FORMULA Raw Material Aquaill K--8 Galactosol 413-W Magnesium Oxide (Heavy) Attagel Mica p80-h Land Plaster Sorbitol Gelvatol 6000 Function RM Spec Body Builder Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 8 11 162 Percent 5.000 .500 .200 2.500 3.000 8$.200 .100 .500 Lbs/Batch 428:8 16.0 200.0 240.0 7056.0 8.0 40.0 100.000 8000.0 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 5$ 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarst gritty or undispersed particles. COK)R Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. HCF: jr Sop 1?91S April 17, 1978 Supersedes Filler Formula TEX-976 Dated: 2/23/78 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT -- Filler for Ready Mix Topping Compound TEX-973 and regular Ready Mix TEX-977. FORMULA Raw Material Aquai'il K-8 Galactosol 413-W Magnesium Oxide (Heavy) Attagel Mica p80-h Land Plaster Sorbitol Gelvatol 6000 Function RM Spec Body Builder Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 8 11 162 Percent 5.000 .500 .10 2.500 3.000 88.3OO . loo . 500 p- 0p-0o 0 0 Lbs/Batch 6.0 200.0 240.0 7064.0 8.0 40.0 100.000 8000.0 WORKING CONSISTENCY Specifications - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 58 60 WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. COLOR Specifications - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound - Formula TEX-977. HCF: jr SGP 0017916 V\ June 27, 1978 Supersedes Filler Formula TEX-976 Dated: 4/17/78 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT -- Filler for Ready Mix Topping Compound TEX-973 and regular Ready Mix TEX-977. FORMULA Raw Material Aquai"il K-8~ Galactosol 413-W -/SODA ASH Attagel Mica pSO-h Land Plaster Sorbitol Gelvatol 6000 WORKING CONSISTENCY Specifications WORKING PROPERTIES Specifications COLOR Specifications Function RM Spec Body Builder Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 8 11 162 Percent 5.000 .500 .10 2.500 3.000 88.3OO .100 .500 Lbs/Batch 400. Q 40.0 8.0 200.0 240.0 7064.0 8.0 40.0 100.000 8000.0 - Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 5$ 60 - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at 1 ast twice a day or with every sixth or seventn batch of filler ma lufactured. This prepared mix shall be tested and shall meet s 1 the specifications required of Ready Mix Joint Compound - Formula TEX-977. HCF:jr SGP OO^17 Ai'.vist 3, 1978 Supersedes Filler Formula TEX-976 Dated: 6/27/78 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT -- Filler for Ready Mix Topping Compound TEX-973 and regular Ready Mix TEX-977. FORMULA fcaw Material Aqual'il K-8 Galactosol 413-W SODA ASH Attagel *Mica p&O-h Land Plaster Sorbitol Gelvatol 6000 WORKING CONSISTENCY Specifications WORKING PROPERTIES Specifications COK)R Specifications Function RM Spec Body Builder Thickener Viscosity Stabilizer Body Builder Anti-cracking agent Filler Borax stabilizer Adhesive 8 11 162 Percent 5.000 .500 .10 2.500 3.000 0S.3OO .100 . 500 Lbs/Batch hm $. 0 200.0 240.0 706:8 40.0 10 ).000 BOOO.O Refer to Plant Testing Procedure No. 32. Maximum Minimum Average 62 53 60 - Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse gritty or undispersed particles. - White Dried compound shall match color of standard sample. NOTE: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth c seventh batch of filler manufactured. This prepared mix shall b : tested and shall meet all the specifications required of Read Mix Joint Compound - Formula TEX-977. * Mica"S"can be substituted at a loading of 5% - 400 lbs/batch HCF: jr SGP 0017918 NEW Formula TEX-976 July 13, 1979 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 DESCRIPTION OF PRODUCT - Filler for Ready Mix Compound TEX-977 FORMULA Raw Material Starch-C9-136 Gypsum Methocel i898.2 Attagel-40 Aqua-Fil-K-8 Staramic 747 Function RM Spec Adhesive 23 Filler Water Retention Bulking 8 Bulking Adhesive 192 Percent 1.00 91.85 .40 1.875 4.375 .50 Lbs/Batch 80.0 "'348.0 32.0 150.0 350.0 40.0 100.000 8000.0 WORKING CONSISTENCY: Refer to Plant Testing Procedure No. 32. Minimum - 58 Maximum - 62 Average - 60 WORKING PROPERTIES: Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLOR: White Dried Compound shall match co .or of standard. Note: A vet mix of the filler shall be prepared accor> ing to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula TEX-977. KCF:ps SGP 0017919 February 5, 1980 Supersedes Formula TEX-976 Dated 7/13/79 ACME, TEXAS, PLANT FORMULA READY MIX FILLER TEX-976 / DESCRIPTION OF PRODUCT - Filler for Ready Mix Compound TEX-977 and topping Compound TEX-974. FORMULA Raw Material Function RM Spec Percent Lbs/Batch / Starch-C9-136 Gypsum / Methocel 240 Attagel-40 / Aqua-Fil-K-8 Staramic 747 Adhesive 10 Filler Water Retention 171 Bulking .8 Bulking 229 Adhesive 192 1.00 91.85 .40 1.875 - 4.375 .50 80.0 7348.0 _ 32.0 150.0 350.0 40.0 100.000 8000.0 WORKING CONSISTENCY; Refer to Plant Testing Procedure No. 32. Minimum - 58 Maximum - 62 Average - 60 WORKING PROPERTIES: Refer to Plant Testing Procedure No. 33. Filler shall be very heavily bodied and possess fair plasticity. It shall be free of any coarse, gritty or undispersed particles. COLORWhite Dried Compound shall match color of standard. Note: A wet mix of the filler shall be prepared according to Formula TEX-977 at least twice a day or with every sixth or seventh batch of filler manufactured. This prepared mix shall be tested and shall meet all the specifications required of Ready Mix Joint Compound Formula TEX-977. -/ denotes change HCF:ps SGP 017920 SGP 0017896