HEATING VENTILATING AIR CONDITIONING GUIDE 1941 Cooling Load In the calculation of the cooling load for an air conditioned space, the problem usually reduces to determining the quantity of inside air that must be withdrawn and the condition to which it must be brought by cooling, separating and possibly reheating so that return of the conditioned air will have the net effect of removing given amounts of energy and water from the air conditioned space.

HEATING VENTILATING AIR CONDITIONING GUIDE 1941 comfort to wet- and dry-bulb temperature at low air movement is shown in Fig. 6.

HEATING VENTILATING AIR CONDITIONING GUIDE 1941 but in most types of buildings this load will be relatively small compared with the heating load and will seldom occur at the time of the heating peak.

HEATING VENTILATING AIR CONDITIONING GUIDE 1941 either direct expansion refrigerant, chilled water, or brine.

HEATING VENTILATING AIR CONDITIONING GUIDE 1941 Temperature GENERAL RULES FOR DRYING '> .

HEATING VENTILATING AIR CONDITIONING CUIDE 1942 Table 4.

HEATING VENTILATING AIR CONDITIONING GUIDE 1942 7.

HEATING VENTILATING AIR CONDITIONING GUIDE 1942 The grate area will depend on several factors of which four are very important.

HEATING VENTILATING AIR .CONDITIONING GUIDE 1942 Table 9.

HEATING VENTILATING AIR CONDITIONING GUIDE 1942 CARRIER, Willis H* (Af 1913) {Presidential Member) (Pres., 1931; 1st Vice-Pres., 1930; 2nd Vice-Pres., 1929; Council, 1923-32) Chairman of the Board.

HEATINC VENTILATING AIR CONDITIONING GUIDE 1942 KURTH, Franz J.

> h' 1943Copyright , BY THE American Society of Heating and Ventilating Engineers and .by it Dedicated . .

to the chapter on Mechanical Warm Air Furnace Systems, with the inclusion of standards which were recently adopted by the industry.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 6.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 From Fig. .5 it may be observed that power requirements for the centri fugal compressor increase much more rapidly than for the reciprocating compressor with increase in evaporator temperature.