American Society of Heating and Ventilating Engineers Guide, 1930 1 pound (avoir.) 1 bushel 1 short ton 1 long ton 16 oz. = 7,000 grains. 1.244 cu. ft. 2,000 lb. 2,240 lb.

American Society of Heating and Ventilating Engineers Guide, 1931 Material Thickness Inches Internal CoNDUCTiViTT OB Conductance Surface Coefficients * h "/o Internal Resistance Brickwork. ...........................

of andAmerican Society Heating Ventilating Engineers Guide m Inlets and Outlets in General *1931 When there is no heat loss from the room being ventilated, the em* air for ventilating purposes may be at very nearly the same temper ' as the air in the room, and the air may be moved across the room1 * the inlets and outlets may be opposite each other.

American Society of Heating.and Ventilating Engineers Guide, 1931 Burton, C.

American Society of Heating' and Ventilating Engineers Guide, 1932 Table 18.

American Society of Heating and Ventilating Engineers Guide, 1932 to Case D except that a portion of the air is recirculated.

American Society of Heating anrf Ventilating Engineers Guide, 1932 454 Chapter 32--tAir Distribution Systems mill exhaust systems = 50 for heating and ventilating ducts = 45 for smooth and 40 for rough conduits of tile, brick or concrete.

American Society of Heating and Ventilating Engineers Guide, 1932 motion since any probable error in recording the time of fall will only amount to a small fraction of the total period.

American Society of Heating and Ventilating Engineers Guide, 1934 respect to the building and should be designed for a maximum of natural light.

American Society of Heating and Ventilating Engineers Guide, 1934 manganese, sulphilr, silicon, and copper makes very little difference in the amount or character of corrosion when under water, although under atmospheric exposure the influence of composition is more marked.

American Society of Heating and Ventilating Engineers Guide, 1934 White Plains--.

American Society of Heating and Ventilating Engineers Guide, 1935 camber, and the thickness of the blades provide a considerable degree f flexibility in design, so that the peak of total efficiency may be made t occur at wide-open volume or at various percentages of that volume. 10 Another advantage of this type of axial flow fan is its low resistance t air passage when standing still.

Insulation Mundet Cork Corp. 450 Seventh Avenue New York, N.

American Society of Heating and Ventilating Engineers Guide, 1935 TARR.

American Society of Heating and Ventilating Engineers Guide, 1936 PROBLEMS IN PRACTICE 1 Determine the amount of sensible and latent heat given off by each person on a dance floor if the dry-bulb temperature is 75 F.