v.

.

( !

11572-1000 MXY/dal aware that any of these entities were engaged in the design, manufacture, selling, applying, installing, or relabeling ofproducts containing asbestos.

11572-1000 MXY/dal INTERROGATORY NO. 8: List ail directors and officers of Defendant from [1930 to 1980] and for each state all positions held and the date(s) during which each position was held.

American Society of Heating and Ventilating Engineers Guide, 1936 With a mechanical warm air system the inlet openings may be located in the floor or base board with satisfactory results but may also be located above the breathing line, which is equally satisfactory when proper inlet velocities are used.

American Society of Heating and Ventilating Engineers Guide, 1936 oversize and favored in every way.

American Society of Heating and Ventilating Engineers Guide, 1936 For radiators: ,, /215 - 70\l-3 -'5 ~ V T. - Tr ) ( 145 Y \Ts -- Tt ) (2) For convectors: ,, /215 - 65\i-5 \TB- Ti ) ( 150 \ \Ta -- Ti / (3) The output under standard conditions will be: Ha = C8 Ht where ... ................

American Society of Heating and Ventilating Engineers Guide, 1936 Table 9.

1936American Society of Heating and Ventilating Engineers Guide, area of the panel must be sufficient to supply the requisite quantity of heat at this low temperature.

.^ American Society of Heating end .Ventilating Engineers Guide, 1936 Table 1.

Valves, Air Anderson Manufacturing Co.

American Society of Heating and Ventilating Engineers Guide, 1936 New Rochelle-- Abrams, A.

American Society of Heating and Ventilating Engineers Guide, 1937' mechanical draft towers vary from 250 fpm to 600 fpm over the gross area of the structure. ** Mechanical draft water cooling equipment may be set up inside ings, where it usually draws its air supply from the general space in whirt | it is installed, and discharges its exhaust air through a duct to the outsi(je I IIndoor cooling towers may be either of the wood-filled or the spray-fil^ type.

American Society of Heating and Ventilating Engineers Guide, 1937 Chapter. 14--Automatic Control TYPES OF AUTOMATIC CONTROL 'ncrease its sensitivity.