American Society of Heating and Ventilating Engineers Guide, 1932 for brick walls are more probably representative of poor workmanship with porous brick and lime mortar.

'/ American Society of Heating and Ventilating Engineers Guide, 1932 quality of service and local conditions.

American Society o/ Heating and Ventilating Engineers Guide, 1932 Table 8.

American Society of Heating and Ventilating Engineers Guide, 1932 it incurs the risk of leakage, drip, or coarse spray which cannot be per mitted when water is supplied by aspiration.

American Society of Heating and Ventilating Engineers Guide, 1934 An Instrument of Service prepared for the Profession-- and Containing reference data on the design and SPECIFICATION OF HEATING AND VENTILATING SYSTEMS---Based on the Transactions--the Investigations of the Research Laboratory and Cooperating Institutions-- and the Practice of the Members and Friends of the Society TOGETHER WITH A Manufacturers' Cataloc Data Section Containing Essential and Reliable Information Concerning Modern Equipment also The Roll of Membership of the Society i l ' ': / , with .

American Society of Heating and Ventilating Engineers Guide, 1934 As in the case of the simple wall, /i and /0 are always the inside and outside surface coefficients for the two materials in contact with air.

American Society of Heating and Ventilating Engineers Guide, 1934 Chapter 19--Air Duct Design 3.

American Society of Heating and Ventilating Engineers Guide, 1934 under conditions of high vacuum is not only reduced in proportion to the difference in the steam temperature between that for 2 lb gage and for 25 in. of vacuum but it is reduced still further by a reduction in the amount of steam which can pass through the orifice when the steam is expanded due to the vacuum.

American Society of Heating and Ventilating Engineers Guide, 1935 Having disposed of the accessory central fan conditioning appara, ` the balance of this chapter will concern only the unit air conditioner' defined in Chapter 41.

American Society of Heating and Ventilating Engineers Giuide, 1935 Distinction should be made between corrosion in heating systems Dr and in the condensate discharge lines from other apparatus using stea^ such as water heaters, kitchen equipment, and sterilizers.

; ''r- V " .v~ r-HUJ- American Society 0/Heating and Ventilating Engineers Guide, 1935 Winter, . comfort zone, , conditioning, apparatus for, cooling in, humidification in, relative humidity in, temperatures, wind .velocities and directions.

American Society of Heating and Ventilating Engineers Guide, 1936 pneumonia death rate is associated with dust, extreme heat, exposure to cold, and to sudden changes in temperature.

American Society of Heating and Ventilating Engineers Guide, 1936 2.

American Society of Heating and Ventilating Engineers Guide, 1936 floor.and overhead heating, has been satisfactory with provisions for high, medium, and low thermostat settings and in some cases, two settings have been satisfactory for cooling.

American Society of Heating and Ventilating Engineers Guide, 1936 Justification for liberal power provision exists also in the possibility of varying demand due to changes in ventilation requirements, intensity of occupation, and weather conditions.