Document pBLqjRKMvyVMbZ0L1gz8g81qX

Therminol 66 IC/FF-35 F, 700= 650 600 550 Max. Film Temp. 705F Max. Bulk Temp. 650F. ... wide-range liquid phase heat transfer fluid for non-pressurized indirect heating to 650 F. 500 450 400- 300- \0ptimum > Use f Range Heat transfer fluids are intended only for indirect heating purposes. Under no circumstances should this product contact or in any way contaminate food, animal feed, food products, food packaging materials, pharmaceu ticals or any items which may directiy or indirectly be ultimately ingested by humans. Any contact may con taminate these items to the extent that their destruction may be required. Precautions against ignitions and fires should be taken with this product. 250200 150 50 Monsanto NOTICE?"Nothing contained herein is to be construed I as a recommendation to use any product in conflict with I any patent. MONSANTO MAKES NO WARRANTIES AS TO THE FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY OF ANY PRODUCT RE FERRED TO, no guarantee of satisfactory results from reliance upon contained information or recommenIdations, and disclaims all liability for any resulting loss or damage. &oX Pour Point --18#F. TrnJenifnrk of i Industrial Chemicals Co.] 800 North Lindbergh Blvl, St. Louis, Missouri 63166 ( gj/, .................... 0615992 ' : *ln certem countries of Western Europe and the Far East. Monsanto sells Therminol Heat Transfer Fluids under the brand name "Santctherm Heat Transfer Fluids". Correspondinp Therminol and Santotherm fluids ere identical in composition. TOWOLDMON0039394 WATER_PCB-00023863 lll.pi lM.l|i rr > Thormlnol 66 Typical Properties* is a high-performance synthetic heat transfer fluid offering low-temperature pumpability along with outstanding high-temperature performance -- up to 650F. Therminol 66 is ideally suited to replace organic fluids which have lower boiling points and must operate under pressure at 650F. i This fluid is designed for use in non-pressurized inj direct heating systems. It delivers efficient, depend- i able process heat with no need for high pressures, | costly "extra" equipment, or continuous supervision. Composition Appearance Odor Pour Point Density (g 75F. Flash Point Modified Terphenyl Oily liquid, practically colorless Faint, characteristic -18F. (-27.8C.) 8.35 lbs,/gal. 355F. (180T) | Therminol 66 is not classified as a fire-resistant heat Fire Point . 382F. (I94C.) i transfer fluid. Consequently, the use of protective 1 devices may be required to minimize fire risk. The AIT 705-F. (374-C.) insurer of your property should be consulted relative Coefficient of Expansion 0.00070 cc/cc/C. ^ to this matter. j To minimize fluid oxidation, Therminol 66 systems j should be blanketed with an inert atmosphere. A ] system relief valve should also be provided. Boiling Range: 10% m 644F. (340C.) 745F. (396-C.) | Therminol 66 offers long service life within its J recommended operating temperature range, and is Average Molecular Weight 240 ! j non-corrosive to metals commonly used in the ! design of heat transfer systems. f*This data is based upon samples tested in the laboratory and is not guaranteed for all samples. Write us for J** / ^complete sales specifications for Therminol 66 heat transfer fluid. c, tr* y~ Variations of Properties With Temperature Temperitura #F "C if 0 -18 so 10 ir. 100 38 ISO 66 i;'' 200 93 200 121 300 149 350 177 400 204 450 232 . 500 260 550 268 600 316 650* 343 700 371 Ibt.gil. 8.67 8.51 8.34 8.14 7.91 7.77 7.59 7.39 7.17 7.04 5.75 6.62 6.42 6.24 6.09 Daiuity Ib./IL1 64.9 63.6 62.4 60.0 59.3 58.0 56.8 55.2 53.6 52.5 50.5 49.5 48.1 46.8 45.6 Kj./m.1 1040 1020 1000 975 950 930 910 885 860 840 810 793 770 750 730 SpacMtHul BTU/lfc. r 0.320 0.350 0.380 0.405 0.430 0.455 0.480 0.505 0.530 0.555 0.590 0.605 0.630 0.655 0.680 KMl./Kg. eC 0.320 0.350 0.380 0.405 0.430 0.455 0.480 0.505 0.530 0.555 0.580 0.605 0.630 0.655 0.680 Thermal Conductivity VisMiity Vaper Pressure BTU/ft hr. 0.0720 0.0711 0.0703 0.0695 0.0687 0.0678 0.0670 0.0662 0.0653 0.0645 0.0637 0.0628 0.0620 0.0613 0.0605 Koel./m. hr. C 16,/ hr. ft cs 0.1072 iir 50000 mmHg. absolute 0.1058 617 250 0.1046 67.8 28.0 0.1034 23.6 10.0 0.1022 10.1 4.40 0.1 0.1008 5.86 2.60 - 0.0997 3.75 1.70 2.0 0.0985 2.57 1.20 - 0.0972 1.88 0.90 20.0 0.0959 1.40 0.69 50.0 0.0948 1.08 0.55 100.0 0.0935 0.87 0.46 200.0 0.0923 0.82 0.44 350.0 0.0912 0.65 0.36 760.0 0.0900 0.49 0.28 1000 ' Kg./em.' - 0.003 0.027 0.068 0.136 0.272 0.476 1.034 1.360 i ) ) j 0615993 .... | TOWOLDMON0039395 WATER_PCB-00023864 ""J|lWMWiiitCTiu>.gwiwMuq u ji '?BWffapy.ffK.iwiiw i jumiiv !, *V. iuyw)F%ijayawi Therminol 66-Physical Properties 40 35 30 cU*nJ 251 20 5 t: 15 i 10 > 5 |j 0 Therminol 66-Heat Transfer Coefficients ( 0615994 TOWOLDMON0039396 WATER_PCB-00023865 '`rtxxr-'vw Therminol 66--Pressure Drop vr'i||iii|..'w>i.iiM- :# 1 o Therminol 66--Safety of Handling Therminol 66 is virtually non-toxic and non-irritating, posing no special handling problems. It is not ab sorbed through the unbroken skin in significant quantities, is non-irritating to the skin and only mildly irritating if eye contact occurs. Immediate flushing of the eye with copious amounts of water will avoid irritation or after-effects. It is suggested that Therminol 66 be washed off the skin with soap and water as soon as possible after contact, but no serious irritation should be observed. Handled like any other industrial chemical, Therminol 66 is quite safe to store and use. Therminol 66 vapors are not toxic, but may cause discomfort if coming off of heated fluid. There is no vapor exposure problem when transferring the fluid from its shipping container to the heat transfer system. On the other hand, vapors emitted by Therminol 66 heated to elevated temperatures may be mildly irritating upon prolonged exposure. In heat transfer installations, the fluid is used in a closed, non-pressurized system free from leaks and with the expansion tank vent trapped so as to con dense any vapors. Consequently, there should be little or no opportunity for workers to come in contact with vapors. While Therminol 66 poses no serious problems with respect to the environment, as a concerned supplier to industry, Monsanto urges the user to maintain a tight system, to correct leakage promptly, and to exercise care in the handling and disposal of this and ail other such products. A tight maintenance program not only protects the environment, but keeps employes comfortable, the working area clean, and the system running smoothly. o i.>+4tt0ft?-Vi j*,<, .................. : ' 0615995 ,4 .. j | ~^TOw6!bMON6b39397 WATEFLPCB-00023866