Document nmGrgD06O87YjqannZq0K1oXm

i PAINTING SPECIFICATIONS j for Professional Use ! I Th e Sh e r w in -Wil l ia ms Co . 101 PROSPECT AYE. llNTEC PRINTED IN. 'J- S. A. t CLEVELAND, OHIO n LL_c '>tr .t? m? PA 147 1-3Z 372 0007--SWP--041260 EXTEftlOt FINISHES ICenflnuvd) Specifications Porch Floors Preparation Surfaces must be clean and dry. Adequate ventilation should be provided underneath porch flooring to prevent rolling from moisture. All loose, scaling, blistered paint must be scraped or burned off. All roughened wood and edges of broken paint shall be sandpapered smooth. 106--Wood Porch Floors--New, llnpornfed Priming--Porch flooring shall receive one priming coat of SWP Undercoater No. 450 on all sides and edges before laying., Firti Coat--S-W Porch and Floor Enamel, in selected color, thinned with Vfe pt. S-W Exolvent or turpentine per gal. Second Coat--S-W Porch and Floor Enamel applied full body. 106A--Wood Porch Floors -- Previously Painted priming--AH bare spots to be primed with S-W Porch and Floor Enamel thinned with Vz pt. S-W Exolvent or turpen tine per gal First Ccar--S-W Porch and Floor Enamel in color selected, thinned with Vi pt. S-W Exolvent or turpentine per gal. Second Coot--S-W Porch and Floor Enamel, applied full body. Cement or Concrete Terrace Floors Preparation Concrete floors must be elevated sufficiently above the ground to assure freedom from moisture rising through the concrete. Allow at least 30 days for concrete to cure and dry throughout before painting. New cioncrete shall be neutral ized with a zinc sulphate wash, 3 lbs. per gal. of water. When dry brush loose crystals from surface prior to painting. 107-r*Gemen1 or Concrete Terraco Floors--New first Coal--S-W Porch and Floor Enamel in color selected, thinned iwith Vz pt. S-W Exolvent or turpentine per gal. Socand Coal--S-W Porch and Floor Enamel, applied full body. Canvas Decks 108--When Cemented with White Lead --Not Asphalt Firtt Coa--S-W Porch and Floor Enamel in color selected, thinned with Vfe pt. S~W Exolvent or turpentine per gal. Second Coot--S-W Porch and Floor Enamel, applied full body. Wood Shingles Preparation AH shingles must be dry when stain is applied. Two coats of stain shall be applied, one coat by dipping before shingles are laid. The finish coat shall be brushed on after shingles are on the building. Shingles shall be dipped two-thirds of their length, drained and tossed into a loose pile to insure proper drying. To insure uniform color, all packages of stain intended for use on one job should be intermixed prior to use. --7-- 0007--SWP--041261 0007-SWP-000124655 Metal Protective Finishes S-W Metal Protective Paints .Requirements for Metal Protection Water and atmospheric fumes promote the cor rosion which destroys iron and steel. The protec tive film, therefore, must be highly impervious to these elements and tenacious in maintaining a con tinuous film. The priming coat must--(1) Contain pigments which retard or inhibit corrosion. (2) Be hard enough to resist abrasion and yet elastic enough to accommodate the expansion and contraction of metal. The finish cool must -- Protect the priming coat. The type of paint and the number of coats required depend upon the nature and the severity of the exposure expected. Kromik Metal Primer An (`list:iprimer for iron and steel. It prevents rust through the inhibitive action of its pigment--a carefully balanced combination of zinc chromate, red lead, zinc oxide and iron oxide. Although Kromik Metal Primer is formulated as a First Coat to be covered with finish coats of Metalastic or KemELestic, the protection afforded without re-coating is equiv alent to the best top coats--a great advantage where steel must stand for long periods of lime before the field coat is applied Kronhik is a good primer for weathered galvanized iron hut is not lecommendcd for new galvanized iron. Characteristics: Applicative--By brush or spray. Drying Time--To touch in 4 hours; recoat overnight. Coverage Per Gallon --500 to 600 Sq. ft. Color--Browrt Change E 41 Nl. Rem Kromik Primer I Consists of the proven pigment combination of Kromik Metal Primer with a synthetic vehicle which offers more rapid drying' and excellent durability Color--Blown E 61 N2. 00Q7-SWP-041262 0007-SWP-000124656